Home > Lucent Technologies > Communications System > Lucent Technologies DEFINITY Communications System Generic 2.2 And Generic 3 V2 DS1/CEPT1/ISDN PRI Reference Manual

Lucent Technologies DEFINITY Communications System Generic 2.2 And Generic 3 V2 DS1/CEPT1/ISDN PRI Reference Manual

Here you can view all the pages of manual Lucent Technologies DEFINITY Communications System Generic 2.2 And Generic 3 V2 DS1/CEPT1/ISDN PRI Reference Manual. The Lucent Technologies manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 181

DEFINITY Communications System Generic 2.2 and Generic 3 V2 
DS1/CEPT1/ISDN PRI Reference  
555-025-107  Issue 1
July 1993
System Administration 
Page 6-7 G3V2 Administration 
6
The c hoic e of isdn-ext
 req uires the c irc uit p ac k be a TN767, 
TN464B or TN464C or later release DS1/CEPT1 interfac e. This 
c hoic e will enab le the board  to use ISDN sig naling  with the D 
c hannel assoc iated  with a d ifferent DS1/CEPT1 interfac e.
The c hoic e of the isdn-pri
 p arameter along  with Bit Rate
 set...

Page 182

DEFINITY Communications System Generic 2.2 and Generic 3 V2 
DS1/CEPT1/ISDN PRI Reference  
555-025-107  Issue 1
July 1993
System Administration 
Page 6-8 G3V2 Administration 
6
Country 
Protoc olG3V2 only
Va l u e s :
A numb er from 1 to 17. Default is 1
.
Re f e re n c e :
Se c t io n  ‘‘Country-Sp ec ific  Layer 3 in G3V2’’ in Chap ter 5, 
‘‘Layers 2 and 3’’.
This field  will only b e d isp layed  if the Signaling Mode
 is 
isdn-pri
, isdn-ext
, or CAS
. This field  is used  for ISDN c alls and  
for...

Page 183

DEFINITY Communications System Generic 2.2 and Generic 3 V2 
DS1/CEPT1/ISDN PRI Reference  
555-025-107  Issue 1
July 1993
System Administration 
Page 6-9 G3V2 Administration 
6
Connec tVa l u e s :
host
network (d efault)
pbx
Re f e re n c e :
Se c t io n  ‘‘User-Network and  Peer Protoc ols’’ in Chapter 5, 
‘‘Layers 2 and 3’’.
Th e  Connect
 field  will only ap p ear if isdn-pri
 signaling is 
c hosen. This field  ind ic ates what is on the far end  of the PRI in 
ord er to c ontrol the layers 2 and  3...

Page 184

DEFINITY Communications System Generic 2.2 and Generic 3 V2 
DS1/CEPT1/ISDN PRI Reference  
555-025-107  Issue 1
July 1993
System Administration 
Page 6-10 G3V2 Administration 
6
InterfaceVa l u e s :
network
p eer-master (G3V2 only)
p eer-slave (G3V2 only)
user (d efault)
Re f e re n c e :
Se c t io n  ‘‘User-Network and  Peer Protoc ols’’ in Chapter 5, 
‘‘Layers 2 and 3’’.
This field  will only ap p ear if pbx
 is c hosen as the Connect
 
value. If you administer user
, the system is user at b oth...

Page 185

DEFINITY Communications System Generic 2.2 and Generic 3 V2 
DS1/CEPT1/ISDN PRI Reference  
555-025-107  Issue 1
July 1993
System Administration 
Page 6-11 G3V2 Administration 
6
G2.2 G3V2
Administered as Layer 2 Layer 3 Administered as Layer 2 Layer 3
user user user network network network
user user user peer-master/side A (G3V2 only) master side A
network network network p eer-slave/sid e B (G3V2 only) slave sid e B
NOTE:
When c onnec ting two DEFINITY systems via ISDN PRI, 
you should  use the...

Page 186

DEFINITY Communications System Generic 2.2 and Generic 3 V2 
DS1/CEPT1/ISDN PRI Reference  
555-025-107  Issue 1
July 1993
System Administration 
Page 6-12 G3V2 Administration 
6
CRC G3V2 only
Va l u e s :
no (d efault)
yes
This field  will only ap p ear if CAS
 is c hosen as the sig naling  
mod e. The CRC
 field ind ic ates whether the c yc lic al red und anc y 
c hec k is to b e d one on the b oard .
Idle Code G3V2 only
Va l u e s :
An 8-d ig it b inary numb er in the rang e 00000000 to 11111111....

Page 187

DEFINITY Communications System Generic 2.2 and Generic 3 V2 
DS1/CEPT1/ISDN PRI Reference  
555-025-107  Issue 1
July 1993
System Administration 
Page 6-13 G3V2 Administration 
6
DMI-BOSVa l u e s :
no
yes (d efault)
Re f e re n c e :
Se c t io n  ‘‘Channel Struc ture and  Sig naling ’’ in Chap ter 4, 
‘‘Physic al Layer’’.
This field only appears when the Bit Rate
 is 1.544
. DMI-BOS 
y
 selec ts a mode of op eration that is c omp atib le with the 
DMI-BOS stand ard . Its use req uires a TN722B or TN767...

Page 188

DEFINITY Communications System Generic 2.2 and Generic 3 V2 
DS1/CEPT1/ISDN PRI Reference  
555-025-107  Issue 1
July 1993
System Administration 
Page 6-14 G3V2 Administration 
6
Synchronization Plan Form Settings
Refer to the sec tion ‘‘Sync hronization’’ in Chap ter 4, ‘‘Physical Layer’’ for further 
information on sync hronizing  the system.
Using  the c ommand  change synchronization
, enter the stratum, either 3 or 4, 
and  the b oard  loc ations of the p rimary and  sec ond ary timing  sourc es. If...

Page 189

DEFINITY Communications System Generic 2.2 and Generic 3 V2 
DS1/CEPT1/ISDN PRI Reference  
555-025-107  Issue 1
July 1993
System Administration 
Page 6-15 G3V2 Administration 
6
Sec ond ary D 
c hannelVa l u e s :
Port loc ation of the b ac kup D c hannel. The default is b lank.
This field will only appear if this signaling group is an NFAS 
sig naling  g roup . It ind ic ates the sec ond ary D c hannel in this 
signaling group. NFAS is supported only in country option 1.
Trunk Group  
for Channel...

Page 190

DEFINITY Communications System Generic 2.2 and Generic 3 V2 
DS1/CEPT1/ISDN PRI Reference  
555-025-107  Issue 1
July 1993
System Administration 
Page 6-16 G3V2 Administration 
6
Signaling Group Form Settings — Pages 2-5
Pages 2-5 of the sig naling group  form are for ad ministering NCA-TSCs. Not all 
NCA-TSCs have to b e ad ministered . The ISDN DCS feature req uires one 
NCA-TSC to b e ad ministered  p er log ic al DCS c hannel, however.
The following  list d esc rib es the ad ministration setting s...
Start reading Lucent Technologies DEFINITY Communications System Generic 2.2 And Generic 3 V2 DS1/CEPT1/ISDN PRI Reference Manual

Related Manuals for Lucent Technologies DEFINITY Communications System Generic 2.2 And Generic 3 V2 DS1/CEPT1/ISDN PRI Reference Manual

All Lucent Technologies manuals