Home > Lucent Technologies > Communications System > Lucent Technologies DEFINITY Communications System Generic 2.2 And Generic 3 V2 DS1/CEPT1/ISDN PRI Reference Manual

Lucent Technologies DEFINITY Communications System Generic 2.2 And Generic 3 V2 DS1/CEPT1/ISDN PRI Reference Manual

Here you can view all the pages of manual Lucent Technologies DEFINITY Communications System Generic 2.2 And Generic 3 V2 DS1/CEPT1/ISDN PRI Reference Manual. The Lucent Technologies manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 221

DEFINITY Communications System Generic 2.2 and Generic 3 V2 
DS1/CEPT1/ISDN PRI Reference  
555-025-107  Issue 1
July 1993
System Administration 
Page 6-47 G2.2 Administration 
6
Field 7
If field  14 is d efined  as non-ISDN (0
, 1
, or 2
) this field  is eq uivalent to the 
Per-Channel Sig naling  and  c ommon c hannel sig naling  op tions used  with System 
85 R2V4. However, the terms have b een c hang ed  to fac ility assoc iated  sig naling  
(FAS) and  NFAS.
If field  14 is d efined  as ISDN (5
),...

Page 222

DEFINITY Communications System Generic 2.2 and Generic 3 V2 
DS1/CEPT1/ISDN PRI Reference  
555-025-107  Issue 1
July 1993
System Administration 
Page 6-48 G2.2 Administration 
6
7-b it c harac ters/d ata at rates up  throug h 56K-b p s via mod ems and  multip lexers 
that d o b it-stuffing . If the d ata c ommunic ations p rotoc ol is b ased  on the 
hig h-level d ata link (HDLC) p rotoc ol (that is, mod e 2/3) and  d ata is transmitted as 
inverted -HDLC, then the ZCS op tion c an b e used  for d ata...

Page 223

DEFINITY Communications System Generic 2.2 and Generic 3 V2 
DS1/CEPT1/ISDN PRI Reference  
555-025-107  Issue 1
July 1993
System Administration 
Page 6-49 G2.2 Administration 
6
enab le. This exc lud es all T1-sp ans c onnec ting  c hannel b anks, unless the 
c hannel b ank is externally timed . Normally, those DS1/T1 sp ans that are used  
exc lusively for voic e and  that are not assig ned  as the p rimary or sec ond ary 
sync hronization sourc e should  b e ad ministered  for slip  d isab le (0
)....

Page 224

DEFINITY Communications System Generic 2.2 and Generic 3 V2 
DS1/CEPT1/ISDN PRI Reference  
555-025-107  Issue 1
July 1993
System Administration 
Page 6-50 G2.2 Administration 
6
Field 12
Sp ec ifies whether (1
) or not (0
) the assoc iated  T1-sp an is used  as an inc oming  
sync hronization sourc e to the switc h. The network sync hronization d iag ram 
should  show those transmission fac ilities that are used  for sync hronization. Eac h 
switc h p ermits a maximum of two interfac es (one p rimary...

Page 225

DEFINITY Communications System Generic 2.2 and Generic 3 V2 
DS1/CEPT1/ISDN PRI Reference  
555-025-107  Issue 1
July 1993
System Administration 
Page 6-51 G2.2 Administration 
6
NOTE:
A loop-timing  p rob lem c an b e c reated  if sync hronization sourc es are not 
ad ministered  c orrec tly. The loop -timing  p roblem exists as the result of an 
error where b oth switc h end p oints (for the same T1-sp an) are ad ministered  
as the p rimary. This c auses the c loc k frequenc y to vary wid ely and  c...

Page 226

DEFINITY Communications System Generic 2.2 and Generic 3 V2 
DS1/CEPT1/ISDN PRI Reference  
555-025-107  Issue 1
July 1993
System Administration 
Page 6-52 G2.2 Administration 
6
1
Assig ns that the interfac e is used  to p rovid e DMI-BOS trunks.
The DMI-BOS trunk g roup s are d efined  using  p roc edure 100, word  1 
(enc od e 108 and /or 109). DMI-BOS ap p lic ations use the switc hs DS1 to 
p rovid e a hig h-sp eed  multip lexed  d ata interfac e for c onnec ting to 
c omp atib le c omp uters. The c...

Page 227

DEFINITY Communications System Generic 2.2 and Generic 3 V2 
DS1/CEPT1/ISDN PRI Reference  
555-025-107  Issue 1
July 1993
System Administration 
Page 6-53 G2.2 Administration 
6
Field 15
Some fac ilities req uire that the c ontents of the D-c hannel b e inverted  to 
g uarantee that the minimum ones density b e maintained  (that is, ZCS line c od ing  
is used ). This field  shows whether the D-c hannel is inverted  or not. Field  enc odes 
and their descriptions are:
Field 16
Field encodes and their...

Page 228

DEFINITY Communications System Generic 2.2 and Generic 3 V2 
DS1/CEPT1/ISDN PRI Reference  
555-025-107  Issue 1
July 1993
System Administration 
Page 6-54 G2.2 Administration 
6
Field 17
This field  is add ed  to b ring  G2.2 into c omp lianc e with EIA sp ec ific ation PIN-1429.
This EIA sp ec ific ation relates to bit-oriented -sig naling  (BOS); 
messag e-oriented -sig naling  (MOS) is d efined  b y a CCITT sp ec ific ation.
Field encodes and their descriptions are:
Field 18
Loop  leng th refers to...

Page 229

DEFINITY Communications System Generic 2.2 and Generic 3 V2 
DS1/CEPT1/ISDN PRI Reference  
555-025-107  Issue 1
July 1993
System Administration 
Page 6-55 G2.2 Administration 
6
on b oth systems. If 26-gaug e PDS c ab les are used , d istanc es are red uc ed  as 
assig ned .
The T1 offic e rep eaters or T1 line rep eaters c an be used  when the on-p remises 
d istanc e limitation is exc eed ed . A T1 offic e rep eater is req uired at eac h end  of 
the c onnec tion to p rovid e an interc onnec tion rang...

Page 230

DEFINITY Communications System Generic 2.2 and Generic 3 V2 
DS1/CEPT1/ISDN PRI Reference  
555-025-107  Issue 1
July 1993
System Administration 
Page 6-56 G2.2 Administration 
6
Field 5
BRI Only for ISDN-PRI and  DMI-MOS ap p lic ations, the d ash (–) is app rop riate.
Field 6
Assig ns this interfac e as the user (0
) or the network (1
) sid e. When c onnec ted  to 
a  4 ESS,  t h e  c u st o m e r  p re m i se s s w i t c h  is  a l w a y s t h e  u se r  si d e .  Wh e n  n o t  
c o n n e c t e d  t...
Start reading Lucent Technologies DEFINITY Communications System Generic 2.2 And Generic 3 V2 DS1/CEPT1/ISDN PRI Reference Manual

Related Manuals for Lucent Technologies DEFINITY Communications System Generic 2.2 And Generic 3 V2 DS1/CEPT1/ISDN PRI Reference Manual

All Lucent Technologies manuals