Lucent Technologies Definity Audix System Release 4.0 Screens Reference Manual

DEFINITY AUDIX System Release 4.0 Screens Reference  585-300-213  Issue 1
May 1999
Screen Descriptions 
3-9 disable/enable Alarm-Origination 
3
disable/enable Alarm-Origination
The Disab le/Enab le Alarm-Orig ination sc reens are used  to temporarily d isable 
(or reenab le) the automatic  alarm rep orting  feature, take status of any alarms, 
and  test alarms. It is typ ic ally used  b y Luc ent Tec hnolog ies p ersonnel to d isab le 
alarm rep orting while troubleshooting  and  rep airing  the system....

DEFINITY AUDIX System Release 4.0 Screens Reference  585-300-213  Issue 1
May 1999
Screen Descriptions 
3-10 disable/enable Alarm-Origination 
3
status Alarm-Origination
The Status Alarm-Orig ination sc reen d isp lays the c urrent status of the alarm 
orig ination feature. 
status alarm-origination
 
NOTE:
This sc reen c an b e ac c essed while the DEFINITY AUDIX System is in the 
OA&M state.
Field Descriptions 
Field Name Description Valid Entries (display only)
alarm-orig ination Current alarm-orig...

DEFINITY AUDIX System Release 4.0 Screens Reference  585-300-213  Issue 1
May 1999
Screen Descriptions 
3-11 disable/enable Alarm-Origination 
3
test Alarm-Origination
The Test Results Orig ination sc reen initiates a d emand  alarm orig ination test and  
d isp lays the results of the test. 
test alarm-origination
nPress   (Enter) after initially entering  the sc reen to start the test. 
nPress   (Canc el) after initially entering  the sc reen to return the user to the 
c ommand  line without starting...

DEFINITY AUDIX System Release 4.0 Screens Reference  585-300-213  Issue 1
May 1999
Screen Descriptions 
3-12 disable/enable Alarm-Origination 
3
Field Descriptions 
Field Name Description Valid Entries (display only)
Date Date and  time test was req uested .
Resourc e Typ e of resource b eing tested .
Loc . Loc ation of the alarm orig ination 
resourc e.7 c harac ter string  that 
ind icates port network, carrier, 
slot, and  p ort. For examp le, 
01a0201 ind icates 
p ort-network= 01, carrier= a, 
slot=...

DEFINITY AUDIX System Release 4.0 Screens Reference  585-300-213  Issue 1
May 1999
Screen Descriptions 
3-13 disable/enable Alarm-Origination 
3
Additional Specifications
While the test is running , you have three op tions: 
1. Press   (Canc el) to ab ort the test and  return to the c ommand  line. 
2. Wait for the test to c omp lete. 
3. Press   (Enter) to p ut the test in the b ac kg round  and  return to the 
c ommand  line. 
Ty p e  status test
 to rec onnec t to the sc reen of a test running  in b...

DEFINITY AUDIX System Release 4.0 Screens Reference  585-300-213  Issue 1
May 1999
Screen Descriptions 
3-14 display Alarms 
3
display Alarms
Th e Alarm Rep ort sc reen d isp lays ac tive or resolved  DEFINITY AUDIX System 
alarms. 
display alarms
The Alarm Rep ort sc reen has two p ag es as shown b elow. Use the first pag e to 
sp ec ify whic h alarms will b e d isp layed  in the rep ort. 

DEFINITY AUDIX System Release 4.0 Screens Reference  585-300-213  Issue 1
May 1999
Screen Descriptions 
3-15 display Alarms 
3
The sec ond  p ag e d isp lays the req uested alarm information.
Field Descriptions 
Field Name Description Valid Entries
NOTE:
The first time this sc reen is used after a restart or reb oot, the field s on the 
selec tion pag e of the sc reen are b lank. Sub seq uently, eac h field on the 
selec tion pag e of the sc reen is p op ulated  with the value entered the last 
time the...

DEFINITY AUDIX System Release 4.0 Screens Reference  585-300-213  Issue 1
May 1999
Screen Descriptions 
3-16 display Alarms 
3
Resolved ?  Disp lays resolved  alarms in the alarm rep ort.  y (d isplay resolved  alarms)
n (not d isp lay resolved  
alarms)
NOTE:
You may req uest major alarm, minor alarm, warning , or any 
comb ination of these for a report.
Major? Disp lays major alarms in the alarm rep ort.  y (d isplay major alarms)
n (not d isp lay major 
alarms) 
Minor? Disp lays minor alarms in the...

DEFINITY AUDIX System Release 4.0 Screens Reference  585-300-213  Issue 1
May 1999
Screen Descriptions 
3-17 display Alarms 
3
Fault Code Fault c ode for the g iven resource type. If this 
field c ontains a fault c od e, d isp lays only 
alarms with this fault c od e.0 - 9999
NOTE:
Eac h resource typ e has its own set of fault c od es. Therefore, 
sp ec ifying  a fault cod e without a resourc e type name c an d isplay 
multiple resourc e typ es with the same fault c ode. 
DISPLAY PAGE 
Resourc e Typ e...

DEFINITY AUDIX System Release 4.0 Screens Reference  585-300-213  Issue 1
May 1999
Screen Descriptions 
3-18 add Announcement-Set 
3
add Announcement-Set
The Announc ement Set sc reens are used to add , remove, c op y or list an 
announc ement set. 
add announcement set
 
annc-set-name 
remove announcement set
 
annc-set-name 
copy announcement set 
annc-set-name
list announcement set annc-set-name
Th e  announcement-set-name is the name of the announc ement set to b e ac ted  
up on.
Field Descriptions...