Lucent Technologies Definity Audix System Release 4.0 Screens Reference Manual

DEFINITY AUDIX System Release 4.0 Screens Reference  585-300-213  Issue 1
May 1999
Screen Descriptions 
3-59 display Errors 
3
Reporting Resource Data
Typ e Resourc e type that rep orted  the error. 
Inst  Particular instance of the reporting  resourc e 
typ e. 
Source Line numb er of the sourc e c ode rep orting the 
error.
Date Rec orded Date that the error was rep orted . 
Time Rec orded Time that the error was rep orted . 
Cnt Counting  the numb er of consecutive id entic al error events 
— two 
occ...

DEFINITY AUDIX System Release 4.0 Screens Reference  585-300-213  Issue 1
May 1999
Screen Descriptions 
3-60 display Events 
3
display Events
The Event Report sc reen d isp lays rep orted  DEFINITY AUDIX System 
maintenanc e events. 
 display events 
NOTE:
The activation c ommands for this screen can b e exec uted  by users with craft or 
higher level login permissions. 
The d isp lay Events sc reen has two p ag es as shown in the samp le b elow. Use the 
first p ag e to sp ec ify the typ es of events to...

DEFINITY AUDIX System Release 4.0 Screens Reference  585-300-213  Issue 1
May 1999
Screen Descriptions 
3-61 display Events 
3
The sec ond  p ag e d isp lays the selec ted  event messag es.
Field Descriptions
Field Name Description Valid Entries
SELECTION PAGE
The first time this sc reen is used after a restart or reb oot, the field s on the selection p ag e of the 
sc reen are b lank. Sub seq uently, each field  on the selec tion pag e of the sc reen is p op ulated  with 
the value entered the last time...

DEFINITY AUDIX System Release 4.0 Screens Reference  585-300-213  Issue 1
May 1999
Screen Descriptions 
3-62 display Events 
3
Time Beg inning  hour and  minute of the g iven 
d ay for the alarm rep ort.b lank 
d ate in hh:mm format
The Start Date field  must 
have valid  entries before 
this field  can b e used . 
Session Numb er Session number for nonalarm event typ es 
in the event rep ort. Only events rep orted  
d uring  this voic e session are d isp layed .b lank 
0 to 999
Reporting Resource 
Ty p...

DEFINITY AUDIX System Release 4.0 Screens Reference  585-300-213  Issue 1
May 1999
Screen Descriptions 
3-63 display Events 
3
DISPLAY PAGE 
For eac h event the following  information app ears in an 80 c haracter line. 
Resourc e Typ e Resourc e type for whic h the event is 
rep orted .
Loc . Loc ation for the resourc e typ e. 
Event Typ e Typ e of error or alarm event.
IN_LINE (error that may req uire some ac tion.)
MP_FAIL (error involving  the failure of a maintenance p roc ed ure (MP) for 
the g iven...

DEFINITY AUDIX System Release 4.0 Screens Reference  585-300-213  Issue 1
May 1999
Screen Descriptions 
3-64 display Events 
3
NOTE:
Some errors d isp lay a sec ond  line c ontaining  auxiliary information, 
inc lud ing  two 10 d ig it Auxiliary Data p arameters and  up  to 50 c harac ters of 
ad d itional information ab out the error. 
Reporting Resource Data
Typ e For error events, resourc e typ e that 
rep orted  the error. For alarm events, alarm 
severity.
Inst For error events, the p artic ular...

DEFINITY AUDIX System Release 4.0 Screens Reference  585-300-213  Issue 1
May 1999
Screen Descriptions 
3-65 change Extensions 
3
change Extensions
The Chang e Extensions sc reen allows the ad ministrator to c hang e a c ustomer’s 
switc h d ialing  p lan without c hang ing  every sub sc rib er’s extension. The 
ad ministrator also uses the Chang e Extensions sc reen to c hang e a b loc k of 
sub sc rib er extensions from one rang e of extensions to another rang e. The 
ad ministrator must sp ec ify the...

DEFINITY AUDIX System Release 4.0 Screens Reference  585-300-213  Issue 1
May 1999
Screen Descriptions 
3-66 change Extensions 
3
Field Descriptions
If the ad ministrator is moving  a b loc k of remote sub sc rib ers extensions from one 
rang e of extensions to another, the Field  Desc riptions table would  b e c omp leted  
in a similar way. The Mac hine Name field  would  then inc lude the name of the 
loc al mac hine on whic h the entire b loc k of sub sc rib ers exist.
Additional Specifications...

DEFINITY AUDIX System Release 4.0 Screens Reference  585-300-213  Issue 1
May 1999
Screen Descriptions 
3-67 list Extensions 
3
list Extensions
The List Extension sc reen d isp lays the extensions of loc al sub sc rib ers, starting  
with lowest extension numb er or the extension sp ec ified  in the c ommand  line. 
 list extensions 
 list extensions 
extension 
Here, 
extension is the extension numb er that b eg ins the list.
Field Descriptions
Field Name Description (display only)
Extension Extension...

DEFINITY AUDIX System Release 4.0 Screens Reference  585-300-213  Issue 1
May 1999
Screen Descriptions 
3-68 display Fragment 
3
display Fragment
Th e  Fr a g m e n t sc reen is used  to c opy, d isp lay or remove a frag ment. 
copy fragment
 fragment-id
display fragment
 fragment-id 
display fragment
 
fragment-id annc-set-name 
remove fragment
 
fragment-id 
remove fragment
 
fragment-id annc-set-name 
Th e  
fragment-id must sp ec ify an existing  frag ment. If the op tional 
annc-set-name is entered...