Lucent Technologies CentreVu Call Management System Release 3 Version 8 Software Installation And Setup Manual

  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing the Solaris Operating System2-33
Enabling Korn 
Shell and the 
Backspace Key
B
Enter the following commands to enable the Korn shell and the 
backspace key:
ksh -o vi
stty erase 

where  is entered by pressing the backspace key.
If you log off and log back in to the system, the Korn shell and the 
backspace key will not work unless you reenter these commands. 
After you install the 
DiskSuite software...

  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing the Solaris Operating System2-34
input-device keyboard
keyboard-click? false
load-base 16384
local-mac-address? false
memory-interleave max
mfg-mode off
mfg-switch? false
name options
oem-banner? false
oem-logo? false
output-device screen
pcia-probe-list sb=1,2,3,4
pcib-probe-list sb=1,2,3
powerfail-time 0
sbus-probe-default d3120
sbus-probe-list 541230
screen-#columns 80
screen-#rows 34...

  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing the Solaris Operating System2-35
Not all options will display for all CMS computers. Check only 
those options that display for your computer. In addition, some 
options will show “data not available” messages. Ignore those 
options.
To change an eeprom option, use the following command:
eeprom 
=
For example, to set the ttyA port for 9600 bps, 8 bit characters, no parity, 
and 1 stop bit, you would...

  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing the Solaris Operating System2-36
Turning On the 
System Activity 
Recorder
B
1. Enter su - sys (be sure to use a space between “ - “ and “sys”) 
to log in with the sys login id. The prompt changes to a $.
2. Enter id to confirm that you are using the sys id. The program 
responds:
Enter the following commands to create and edit the cron.sys 
file:
cd /var/opt
crontab -l > cron.sys
vi cron.sys
The...

  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing the Solaris Operating System2-37
5. Enter the following commands:
crontab -r
crontab cron.sys
6. Enter the following command to confirm that the changes you made 
are intact:
crontab -l
The program responds:
7. Enter exit to leave superuser mode (you may have to do this 
twice).
The prompt changes back to the “#” character.
8. To remove the Solaris 7 installation CD, enter: 
eject cdrom 
#ident...

  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing the Sun Online VTS 3.12-38
Installing the Sun Online VTS 3.12
Overview2Installing the Sun Online VTS 3.1 software provides test facilities for the 
system.
Platform 
Considerations
2
lAll platforms.
Prerequisites2lThe Solaris 7 operating system must be installed.
lVerify that you are logged in as root at the console.
lObtain the “Software Supplement for the Solaris 7 Operating 
Environment” CD....

  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing the Sun Online VTS 3.12-39
3. Enter the command:
/usr/sbin/pkgadd -d /cdrom/cdrom0/Product SUNWvts SUNWvtsmn
The program responds:
4. Enter y
 The program responds:
5. Enter eject cd to eject the CD-ROM from the computer.
Processing package instance  from 

SunVTS
.
.
## Checking for conflicts with packages already installed.
## Checking for setuid/setgid programs.
This package contains scripts which...

  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing Link and Port Packages2-40
Installing Link and Port Packages2
Installing the link and port packages includes the following:
lInstalling Sunlink HSI/S software
lInstalling HSI/P software
lInstalling SAI/P adapter drivers
lInstalling Aurora ports card drivers
lInstalling Bay Networks Annex NTS drivers
lInstalling the Solstice for Server Connect X.25 package.
Installing the 
SunLink HSI/S 
Software
2...

  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing Link and Port Packages2-41
3. Enter:
/usr/sbin/pkgadd -d /cdrom/cdrom0/Product 
The program responds:
4.
Press Enter  
The following packages are available:
1 S
UNWhsis  SunHSI/S Driver for SBUS
(sparc) 3.0,REV=1998.11.09
2 SUNWhsism  SunHSI/S Man Pages for SBUS
(sparc) 3.0,REV=1998.11.09
3 SUNWhsisu  SunHSI/S Utilities for SBUS
(sparc) 3.0,REV=1998.11.09
Select package(s) you wish to process
(or ‘all’...

  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing Link and Port Packages2-42
5. Enter: y
The program proceeds to install the SUNWhsis, SUNWhsism and 
SUNWhsisu packages. When the installation is finished, the 
program returns to the installation menu and prompts:
6. Enter: q
7. Enter: eject cdrom 
Installing the 
HSI/P Software
2
Overview2The HSI/P card(s) provides interface ports to the CMS computer. If your 
system does not have an HSI/P card, skip...