Lucent Technologies CentreVu Call Management System Release 3 Version 8 Software Installation And Setup Manual

  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing Link and Port Packages2-53
9. Press Enter
The program responds:
10. Press Enter
 The program responds:
11. Press Enter
 The program responds:
12. Press Enter
 The program responds:
13. Press Enter
 The program responds:
BFS directory [/usr/spool/erpcd/bfs]:
Do you wish to install manual pages at this time? [y]:
On-line manual pages will be installed in the appropriate 
subdirectory (i.e., ANNEX and...

  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing Link and Port Packages2-54
14. Press Enter
The program responds:
15. Select the Install all images option. 
The program responds:
16. Enter y
 The program responds:
17. Enter 7 to select the none option. The program responds:
1)      Com-Server Annex 3
2)      Com-Server MicroAnnex
3)      Install all images
Please select the annex model(s) you will be using.
You can specify a list separated by spaces...

  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing Link and Port Packages2-55
18. Press Enter
 The program responds:
19. Enter: n
 The program responds:
20. Press Enter. The program responds:
21. Press Enter
 The program responds:
22. Press Enter
 The program responds:
Do you want the erpcd daemon to provide access control (y/n) 
[y]:
Copies of the following files have been updated:
         service annex-initd
Do you want to install any of these files...

  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing Link and Port Packages2-56
23. Press Enter
 The program responds:
24. Enter: n
 The program responds with the system prompt.
Setting Up the 
NTS Start-Up 
Files
2
The following commands create symbolic links to S99annex-initd 
and other important files and then check to verify that the files were 
linked successfully. 
1.  On a single command line, enter:
echo “/ect/rc2.d/annex-initd start” >...

  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing Link and Port Packages2-57
4. Enter:
ls -l /usr/bin/na
ls -l /usr/bin/rtelnet
ls -l /usr/bin/aprint
After each command, review the output and verify that the symbolic 
links are set correctly. If the symbolic links are set correctly, the ls 
command output will indicate the link at the end of each line. For 
example, the ls -l /usr/bin/na command will generate the 
following output:    
5. Enter: eject...

  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing Link and Port Packages2-58
Retrieving System 
Information
2
If you already know your hostname, hostid, and X.25 license 
password, fill in the table below, skip this procedure, and go to the 
“Installing the Solstice for Server Connect X.25 Package
” procedure. If 
you do not already know your hostname and hostid, use this 
procedure to determine that information:
1. Enter the command: showrev
The...

  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing Link and Port Packages2-59
3. Change directories by entering:
cd /cdrom/cdrom0/products
4. Enter:
/usr/sbin/pkgadd -d x25/Image/sparc
The program responds:
5. Enter 1 2 3 4 
 The program responds:
The following packages are available:
1 SUNWllc2a LLC2 kernel modules and include files for Solaris/SPARC
(sparc) 9.1
2 SUNW11c2b LLC2 user programs and man pages for Solaris/SPARC
(sparc) 9.1
3 SUNWx25a X.25...

  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing Link and Port Packages2-60
6. Enter y
 The program responds:
7. Enter y
The program responds:
8. Enter y
 The program responds:
Installing llc2a
,
,
,
The following files are already installed on the system and are being
used by another package:
*/opt/SUNWconn/man 
*/opt/SUNWconn/man/man7 
* - conflict with a file which does not belong to any package.
Do you want to install these conflicting files...

  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing Link and Port Packages2-61
9. Enter y
 The program responds:
10. Enter q 
The program responds with the system prompt.
11. Enter:
/usr/sbin/pkgadd -d licenses/Image/sparc SUNWcclit SUNWlicsw
The program responds:
Installing X.25 user programs and libraries for Solaris/SPARC as 
## Installing part 1 of 1.
.....
Installation of  was successful.
The following packages are available:
1 SUNWllc2a LLC2...

  Installing Software and Setting Up CMS CentreVu®  CMS R3V8 Software Installation and Setup
Installing Link and Port Packages2-62
12. Enter y
 The program responds:
13. Enter y
 The program responds:
14. Move to the root directory by entering cd
15. Enter eject cd
The X.25 license must now be setup.
Installing Solstice Connect Center license 
information as 
## Installing part 1 of 1.
.....
.....
This package contains scripts which will be executed 
with super-user permission during the process of...