Lucent Technologies Amis Analog Networking Guide

AMIS Analog Networking  585-300-512  Issue 7
May 1999
AUDIX Administration 
3-9 Implementation 
3
Enter the c omp lete telep hone numb er need ed  for the remote 
mac hine to c all the loc al system. The “ loc al numb er”  is the hunt 
g roup number assig ned  to the analog voic e p orts. The “ c ountry”  
c od e c an have a maximum of four d ig its, the “ area/trunk”  c od e a 
maximum of seven, and  the “ loc al numb er”  a maximum of 15. 
However, the 
complete c allbac k numb er (c ountry c od e,...

AMIS Analog Networking  585-300-512  Issue 7
May 1999
AUDIX Administration 
3-10 Implementation 
3
b . AMIS analog  networking  inc oming  allowed  
This field  app lies only to AMIS analog  networking . 
Set this field to “ y”  if you want the loc al system to ac c ep t inc oming  
AMIS analog  c alls. Set this field  to “ n”  if you want the loc al system 
to refuse inc oming  AMIS c alls. 
NOTE:
If you c annot set this field  to “ y” , the AMIS Analog Networking  
feature has 
not b een ac tivated  b...

AMIS Analog Networking  585-300-512  Issue 7
May 1999
AUDIX Administration 
3-11 Implementation 
3
e.AMIS p rotoc ol—use 8 minutes for inc oming  msg  leng th 0? 
This field  app lies only to AMIS analog  networking . 
Some non-Luc ent Tec hnolog ies remote voic e mail systems c annot 
sp ec ify the messag e leng th and  use a zero (0) in the protoc ol. This 
field  enab les the loc al system to rec ord  these inc oming  messages 
as follows: 
nEn t e r  y
 for the loc al system to assume an inc oming...

AMIS Analog Networking  585-300-512  Issue 7
May 1999
AUDIX Administration 
3-12 Implementation 
3
Task 4: Administer Outcalling Periods
The AMIS Analog  Networking  and  Messag e Delivery features use the outc alling  
p orts to d eliver messag es. Althoug h outcalling  p eriod s must b e ad ministered , 
the Outc alling  feature itself d oes 
not need  to be ac tive for AMIS analog 
networking  or messag e d elivery to work. 
NOTE:
For more effic ient use of system resourc es, the system ad ministrator...

AMIS Analog Networking  585-300-512  Issue 7
May 1999
AUDIX Administration 
3-13 Implementation 
3
2. Go throug h the following  form field s b y p ressing  the   key, and  c hang e 
any field s need ed  to imp lement the AMIS Analog  Networking  or Messag e 
Delivery features: 
a. Outcalling active 
En t e r  n
 if you want to use the AMIS Analog  Networking  and /or 
Message Delivery features and do 
not want to ac tivate the 
Outc alling  feature. Enter y
 if you want to use the Outcalling feature 
in...

AMIS Analog Networking  585-300-512  Issue 7
May 1999
AUDIX Administration 
3-14 Implementation 
3
3. If you have c hang ed  any d ata in the field s, p ress   or   (F1). 
To ac tivate the c hang es, you need  to restart the system (d one in Task 7). 
4. Press   to exit the form. 
Task 5: Adjust System Limits
For either the AMIS Analog  Networking  or Message Delivery features, you may 
have to ad just system limits to ac c ommod ate ad d itional ad ministered  remote 
sub sc rib ers and /or messag e d...

AMIS Analog Networking  585-300-512  Issue 7
May 1999
AUDIX Administration 
3-15 Implementation 
3
Figure 3-5. The system: limits Form
3. Go throug h the following  form field s b y p ressing  the   key, and  c hang e 
any field s need ed  to imp lement the AMIS Analog  Networking  or Messag e 
Delivery features: 
a. Messag e lengths, maximum (sec onds) 
If you set the amis p rotoc ol - use 8 minutes for inc oming  msg length 
0? field  to “ n”  on the system:translation:analog network
 
form, the numb...

AMIS Analog Networking  585-300-512  Issue 7
May 1999
AUDIX Administration 
3-16 Implementation 
3
c . Sub sc rib er, ad ministered  remote 
Enter the numb er of ad ministered remote sub sc rib ers that are 
exp ec ted  for the entire network (use the d ata from step  1c ). This 
numb er inc lud es ad ministered  sub sc rib ers on remote d ig itally 
networked  systems, ad ministered  remote users on remote systems 
ad ministered  for AMIS one-step  ad d ressing , and  administered  
messag e d elivery...

AMIS Analog Networking  585-300-512  Issue 7
May 1999
AUDIX Administration 
3-17 Implementation 
3
Task 5C: Increase Filesystem Sizes
To inc rease the size of one or more filesystems, you need  to shut the system 
d own. At an ap prop riate time, d o the following  step s: 
1. Type sh
 on the p ath line to ac c ess the shutd own form and  p ress  . 
2.Set typ es to “ c ”  (c amp -on) and  reason to “ a”  (ad ministration). Press 
 or   (F1) and  wait for a suc c essful shutd own. 
3. Exit the form, then...

AMIS Analog Networking  585-300-512  Issue 7
May 1999
AUDIX Administration 
3-18 Implementation 
3
Task 6: Administer Retransmission Intervals
The loc al system makes three attemp ts to deliver AMIS analog  networking  
messag es and  six attemp ts to d eliver messag e d elivery messag es. If all d elivery 
attemp ts fail, the send er is notified  throug h a new voic e mail messag e that the 
message could not be delivered. 
NOTE:
On R1V6 systems, the send to non-ad ministered  rec ip ients field  app...