Lucent Technologies Amis Analog Networking Guide

AMIS Analog Networking  585-300-512  Issue 7
May 1999
Intuity System AMIS Administration 
5-27 AMIS Remote Machine Administration 
5
6. Enter a start time in the start
 field .
Use the format HH:MM where HH stand s for hours and  MM stand s for 
minutes. Spec ify the time using  a 24-hour or military time c loc k. For 
examp le, if you want the start time to b e 11:00 p .m., enter 23:00 in the 
field .
7. Enter an end  time in the end
 field .
Use the format HH:MM where HH stand s for hours and  MM stand...

AMIS Analog Networking  585-300-512  Issue 7
May 1999
Intuity System AMIS Administration 
5-28 AMIS Remote Machine Administration 
5
10. For eac h AMIS remote mac hine you p lan to send  voic e messag es to, 
rep eat step s 4 throug h 9.
NOTE:
To enter information for another remote mac hine, enter the next 
remote mac hine name over the p revious name. When you p ress 
 or   to move the c ursor to the next field , the information for 
the p revious mac hine c lears from the sc reen.
11. When you finish...

AMIS Analog Networking  585-300-512  Issue 7
May 1999
Intuity System AMIS Administration 
5-29 AMIS Remote Machine Administration 
5
Figure 5-17. Blank AUDIX Voice Messaging Screen
3. Enter change machine 
 at the enter 
command
 p rompt. After you enter the c ommand , you see the Mac hine 
Profile sc reen as shown in Fig ure 5-18.
If you d o not know the names of the remote mac hines, use the list 
machines
 c ommand . When you enter the c ommand  you see a list of all 
mac hines ad ministered on the...

AMIS Analog Networking  585-300-512  Issue 7
May 1999
Intuity System AMIS Administration 
5-30 AMIS Remote Machine Administration 
5
Figure 5-18. Machine Profile Screen for a Remote AMIS Machine 
NOTE:
Th e  machine name
, location
, and voice ID
 field s are d isp lay 
only. You c annot c hang e the information in the field s.
4. Enter one of the following  c onnec tion typ es in the Type
 field . Refer to 
Chapter 2, Planning  and  Desig n, to find  the c orrec t c onnec tion typ e for 
the remote mac...

AMIS Analog Networking  585-300-512  Issue 7
May 1999
Intuity System AMIS Administration 
5-31 AMIS Remote Machine Administration 
5
6. Enter an extension leng th for the remote mac hine.
The extension length depends on the feature you are administering. Enter 
a numb er b etween 3 and  10. Use the following  g uidelines to enter an 
extension length:
nFo r  amisac mac hines (AMIS c asual or two-step  add ressing ), the 
extension length field  id entifies the numb er of dig its a loc al 
mac hine must d...

AMIS Analog Networking  585-300-512  Issue 7
May 1999
Intuity System AMIS Administration 
5-32 AMIS Remote Machine Administration 
5
Enter the Address Ranges for the Remote
Machine
The Ad d ress Rang e sec tion of the Mac hine Profile sc reen allows you to set p refix 
and  ad d ress rang es for the remote AMIS mac hines. Intuity AUDIX Voic e 
Messag ing  uses the p refix and  ad d ress rang es to d etermine the remote mac hine 
on whic h a remote subsc riber resid es when messag es are ad d ressed  to...

AMIS Analog Networking  585-300-512  Issue 7
May 1999
Intuity System AMIS Administration 
5-33 AMIS Remote Machine Administration 
5
Use the following  p roc ed ure to enter add ress rang es information on the remote 
mac hine.
1. Enter a remote AMIS mac hine p refix in the Prefix
 field as listed  on the 
remote mac hine worksheets in Chap ter 2. As you enter the p refix, refer to 
the following  g uid elines:
nAd d ress p refixes are op tional. For the ad d ress p refixes you want 
sub sc rib ers to d...

AMIS Analog Networking  585-300-512  Issue 7
May 1999
Intuity System AMIS Administration 
5-34 AMIS Remote Machine Administration 
5
Figure 5-19. Page Two of the Machine Profile Screen
6. Enter y
 for yes or n
 for no in the Send to Non-Administered 
Recipients
 field .
When a sub sc rib er ad d resses a messag e to a remote extension that d oes 
not map  to an ad d ress known b y the loc al system, the loc al system ad d s 
this potential sub sc rib er to the d ata base, then sends the messag e to...

AMIS Analog Networking  585-300-512  Issue 7
May 1999
Intuity System AMIS Administration 
5-35 AMIS Remote Machine Administration 
5
NOTE:
Permitting sub sc rib ers to send messag es to nonad ministered  
rec ip ients may have a sig nific ant imp ac t on the network, 
c ausing extra or unnec essary c alls to other systems and  
load ing  the loc al sub sc rib er d atab ase with unneed ed  
rec ords. If the network is kep t up -to-d ate, c hang e the field  to 
n
 to red uc e the system load . Often,...

AMIS Analog Networking  585-300-512  Issue 7
May 1999
Intuity System AMIS Administration 
5-36 Record Remote Machine Names (Optional) 
5
Record Remote Machine Names 
(Optional)
The name of eac h remote voic e mail system, telephone numb er, or rang e of 
mac hines and/or numb ers may b e rec ord ed  using  your telep hone. The loc al 
system voic es these names when loc al sub sc rib ers ad d ress messag es to this 
mac hine, or when they rec eive messag es from remote sub sc rib ers whose names 
are not...