LG Television 19LE5300 User Manual

							41
EXTERNAL  EQUIPMENT  SETUP
VCR SETUP
Ant\fnna Conn\fction
DC-IN
RGB IN (PC)
AUDIO INRGB/DVI
(DVI)OPTICAL 
DIGITALAUDIO OUT
/DVI IN
CO\fPONENT IN AV IN
RS-2\b2C IN(CONTROL&SERVICE)
12
VIDEOAUDIOL(\fONO)R
VIDEOAUDIOY PBPRLRANTENNA/
CABLE INLRS-VIDEO VIDEO
AUDIO
OUTPUTSWITC\f
ANT IN
ANT OUT
ANTENNA/
CABLE IN
DC-IN
RGB IN (PC)
AUDIO IN
RGB/DVI
(DVI)OPTICAL 
DIGITALAUDIO OUT
/DVI IN
CO\bPONENT IN
RS-232C IN(CONTROL&SERVICE)
12
VIDEO AUDIOY PBPRLR
AV INVIDEOAUDIOL(\bONO)R
S-VIDEO
OUTPUT
SWITC\f
ANT IN
ANT OUT
LRVIDEO AUDIO
Wa\b\b Jack
An\fenna
1. How \fo connec\f
1Connect  the  RF  antenna  out  socket 
of the VCR to the  ANTENNA/CABLE 
IN socket on the TV.
2Connect the antenna ca\fle to the RF 
antenna in socket of the VCR.
2. How \fo use
ꔛ Set  VCR  output  switch  to  3  or  4  and 
then tune TV to the same channel num \b
\fer.
ꔛ Insert  a  video  tape  into  the  VCR  and 
press  PLAY  on  the  VCR  (Refer  to  the 
VCR owner’s manual).
1
2
Composit\f (RCA) Conn\fction
DC-IN
RGB IN (PC)
AUDIO IN RGB/DVI
(DVI)OPTICAL 
DIGITALAUDIO OUT
/DVI IN
CO\fPONENT IN AV IN
RS-2\b2C IN(CONTROL&SERVICE)
12
VIDEOAUDIOL(\fONO)R
VIDEO
AUDIOY PBPRLRANTENNA/
CABLE INLRS-VIDEO VIDEO
AUDIO
OUTPUTSWITC\f
ANT IN
ANT OUT
ANTENNA/
CABLE IN
DC-IN
RGB IN (PC)
AUDIO INRGB/DVI
(DVI)
OPTICAL  DIGITALAUDIO OUT
/DVI IN
CO\bPONENT IN
RS-232C IN(CONTROL&SERVICE)
12
VIDEO AUDIOY PBPRLR
AV INVIDEOAUDIOL(\bONO)R
S-VIDEO
OUTPUT
SWITC\f
ANT IN
ANT OUT
LRVIDEO AUDIO
1. How \fo connec\f
1Connect  the  AUDIO/VIDEO  jacks  \fetween  TV 
and VCR. Match the jack colors (Video = yellow, 
Audio Left = white, and Audio Right = red)
2. How \fo use
ꔛ  Insert a video tape into the VCR and press PLAY 
on the VCR.  (
Refer to the VCR owner’s manual. )
 
ꔛ Select  the  AV or AV1/2*  input  source  on  the  TV 
using the  INPUT \futton on the remote control.  
!
?
!
?
NOTE
► If you have a mono VCR, connect the audio ca\fle 
from the VCR to the  AUDIO L(MONO) jack of the TV.
1
* AV2: Except 19/22/26LE5300, 22/26LE5500   
						

							EXTERNAL EQUIPMENT SETUP
EXTERNAL  EQUIPMENT  SETUP
42
OTHER A/V SOURCE SETUP
ANTENNA/CABLE IN
DC-IN
RGB IN (PC)
AUDIO IN
RGB/D\fI
(D\fI)OPTICAL 
DIGITALAUDIO OUT
/D\fI IN
COMPONENT IN
RS-2\b2C IN(CONTROL&SER\fICE)
12
\fIDEO AUDIOY PBPRLR
A\f IN\fIDEOAUDIOL(MONO)R
LR\fIDEO
Camcorder
Video Game Se\f
1. How \fo connec\f
1Connect  the 
AUDIO/VIDEO   jacks 
\fetween TV  and  external  equipment. 
Match the jack colors
.
( Video = yellow, Audio Left = white, and 
Audio Right = red )
2. How \fo use
ꔛ Select the 
AV or AV1/2*  input source on 
the  TV  using  the  INPUT  \futton  on  the 
remote control.
ꔛ Operate  the  corresponding  external 
equipment.
1
* AV2: Except 19/22/26LE5300, 22/26LE5500 
						

							43
EXTERNAL  EQUIPMENT  SETUP
USB CONNECTION
USB IN
IN 3
H/P
Memory Key
or
1. How \fo connec\f
1 Connect the USB device to the USB 
IN  jack on the side of TV. 
2. How \fo use
ꔛ After  connecting  the  USB IN jack,  you 
use the USB function. (►
p.78)
HEADPHONE SETUP (Excep\f 37/42/47LD450C)
H/P
You can list\fn to th\f sound through th\f h\fadphon\f.
1. How \fo connec\f
1Plug  the  headphone  into  the  head \b
phone socket.
2To  adjust  the  headphone  volume, 
press  the  VOL  +/-  \futton.  If  you 
press  the  MUTE  \futton,  the  sound 
from the headphone is switched off.
!
?
!
?
NOTE
► AUDIO  menu  options  are  disa\fled when  connecting  a 
headphone.
►
 When  changing  AV  MODE  with  a  headphone  con \b
nected, the change is applied to video \fut not to audio.
►
 Optical  Digital  Audio  Out  is  not  availa\fle  when  con \b
necting a headphone.   
						

							EXTERNAL EQUIPMENT SETUP
EXTERNAL  EQUIPMENT  SETUP
44
ANTENNA/CABLE IN
DC-IN
RGB IN (PC)
AUDIO INRGB/D\fI
(D\fI)
/D\fI IN
COMPONENT IN A\f IN
RS-2\b2C IN(CONTROL&SER\fICE)
12
\fIDEOAUDIOL(MONO)R
\fIDEO
AUDIOY PBPRLR
OPTICAL 
DIGITALAUDIO OUT
AUDIO OUT CONNECTION
S\fnd th\f TV’s audio to \fxt\frnal audio \fquipm\fnt via th\f Audio Output port.
I\b you want to \fnjoy digital broadcasting through 5.1-chann\fl sp\fak\frs, conn\fct th\f OPTICAL DIGITAL 
AUDIO OUT t\frminal on th\f back o\b TV to a Hom\f Th\fat\fr (or amp). 
!
?
!
?
NOTE
► When connecting with external audio equipment, such 
as amplifiers or speakers, you can turn the TV speakers 
off in the menu.  (►
p.119)
!
?
!
?
CAUTION
► Do not look into the optical output port. Looking at 
the laser \feam may damage your vision.
►
 Audio with ACP (Audio Copy Protection) function may 
\flock digital audio output.
1. How \fo connec\f
1Connect one end of the optical ca\fle to the 
TV port of  OPTICAL DIGITAL AUDIO OUT .
2Connect the other end of the optical ca\fle to 
the digital audio input on the audio equip\b
ment.
3Set the “TV Speaker option \b Off” in the 
AUDIO menu. (►
p.119). See the external audio 
equipment instruction manual for operation.
1
2 
						

							45
EXTERNAL  EQUIPMENT  SETUP
ANTENNA/CABLE IN
DC-IN(DVI)
OPTICAL  DIGITALAUDIO OUT
/DVI IN
CO\fPONENT IN AV IN
RS-2\b2C IN(CONTROL&SERVICE)
12
VIDEOAUDIOL(\fONO)R
VIDEO
AUDIOY PBPRLR
RGB IN (PC)
AUDIO IN
RGB/DVI
RGB OUTPUTAUDIO
ANTENNA/ CABLE IN
DC-IN
RGB IN (PC)
AUDIO IN
RGB/DVIOPTICAL  DIGITALAUDIO OUT
CO\fPONENT IN AV IN
RS-2\b2C IN(CONTROL&SERVICE)
VIDEOAUDIOL(\fONO)R
VIDEO
AUDIOY PBPRLR
(DVI)/DVI IN
12
DVI OUTPUTAUDIO
PC SETUP
This TV provid\fs Plug and Play capability, m\faning that a PC adjusts automatically to th\f TV’s s\ft
-
tings. 
1. How \fo connec\f
1Connect the VGA output of the PC to the 
RGB IN  (
PC )
 jack on the TV.
2Connect PC audio output to the   AUDIO IN 
( RGB/DVI )
 jack on the TV.
2. How \fo use
ꔛ Turn on the PC and the TV.
ꔛ Select the  RGB-PC input source on the TV using 
the  INPUT \futton on the remote control.
VGA (D-Sub 15 Pin) Conn\fction
12   
						

							EXTERNAL EQUIPMENT SETUP
EXTERNAL  EQUIPMENT  SETUP
46
DVI to HDMI Conn\fction
1. How \fo connec\f
1Connect the DVI output of the PC to the 
HDMI/DVI IN 1 or 2* jack on the TV.
2Connect the PC audio output to the  AUDIO IN 
(RGB/DVI) jack on the TV.
2. How \fo use
ꔛ Turn on the PC and the TV.
ꔛ  Select  the  HDMI1  or HDMI2 *  input  source  on  the 
TV using the  INPUT
 \futton on the remote control.
ANTENNA/
CABLE IN
DC-IN
(DVI)
OPTICAL 
DIGITALAUDIO OUT
/DVI IN
CO\fPONENT IN AV IN
RS-2\b2C IN(CONTROL&SERVICE)
12
VIDEOAUDIOL(\fONO)R
VIDEO
AUDIOY PBPRLR
RGB IN (PC)
AUDIO IN
RGB/DVI
RGB OUTPUTAUDIO
ANTENNA/ CABLE IN
DC-IN
RGB IN (PC)
AUDIO INRGB/DVIOPTICAL  DIGITALAUDIO OUT
CO\fPONENT IN AV IN
RS-2\b2C IN(CONTROL&SERVICE)
VIDEOAUDIOL(\fONO)R
VIDEO
AUDIOY PBPRLR
(DVI)/DVI IN
12
DVI OUTPUTAUDIO
1
2
* HDMI2: For 32/42/47/55LD520, 55LD520C, 42/47/55LD630 
						

							47
EXTERNAL  EQUIPMENT  SETUP
Support\fd Display Sp\fci\bications (RGB-PC, HDMI-PC)
!
?
!
?
NOTE
►To get the the \fest picture quality, adjust the PC graphics card to 1360 x 768 (19/22/26LE5300, 
22/26LE5500) or  1920 x 1080 (Other models).
►Depending on the graphics card, DOS mode may not work if a HDMI to DVI Ca\fle is in use.
►
In PC mode,  there may \fe noise associated with the resolution, vertical pattern, contrast or \fright\b
ness.  If  noise  is  present,  change  the  PC  output  to  another  resolution,  change  the  refresh  rate  to 
another rate or adjust the \frightness and contrast on the PICTURE menu until the picture is clear.
►Avoid keeping a fixed image on the screen for a long period of time. The fixed image may \fecome  permanently imprinted on the screen.
►The synchronization input form for Horizontal and Vertical frequencies is separate.
►Depending  on  the  graphics  card,  some  resolution  settings  may  not  allow  the  image  to  \fe  posi \b
tioned on the screen properly.
►When selecting HDMI\bPC, set the “Input La\fel \b PC” in the OPTION menu. 
Resolution Horizontal 
Frequency (
kHz ) Vertical 
Frequency (
Hz )
640x350 31.468 70.09
720x400 31.469 70.08
640x480 31.469 59.94
800x600 37.879 60.31
1024x768 48.363 60.00
1280x768 47.776 59.87
1360x76847.71260.015
1280x102463.981 60.02
1600x120075.0060.00
1920x1080
RGB\bPC66.587 59.934
1920x1080
HDMI\bPC67.50 60.00
Except 19/22/26LE5300, 
22/26LE5500
Except 32/37/42/47/55LE5300, 
42/47/55LE7300, 42/47/55LE530C   
						

							EXTERNAL EQUIPMENT SETUP
EXTERNAL  EQUIPMENT  SETUP
48
Scr\f\fn S\ftup \bor PC mod\f
You can choos\f th\f r\fsolution in RGB-PC mod\f.
Th\f Position, Phas\f, and Siz\f can also b\f adjust\fd.
You can choos\f this option only wh\fn th\f PC r\fsolution is s\ft to 1024X768, 1280X768 or 1360X768.
S\fl\fcting R\fsolution
1MENUSelect PICTURE.
2ENTERSelect Screen (RGB-PC).
3ENTERSelect Reso\bu\fion.
4ENTERSelect the desired resolution.
5ENTER
PICTUREꔂ Move    ꔉ Enter
   • Brightness  50   • Sharpness  70   • Color  60   • Tint  0   • Color Temp.  0   • Advanced Control   • Picture Reset• Screen (RGB-PC)
RGWC
ꔉꔠ
ꔑ 1024 x 768
□  1280 x 768
□  1360 x 768
Auto Config.
Resolution
Position
Size
Phase
Reset
SCREENꔂ Move    � Prev. 
						

							49
EXTERNAL  EQUIPMENT  SETUP
Automatically adjusts pictur\f position and minimiz\fs imag\f instability. A\bt\fr adjustm\fnt, i\b th\f imag\f 
is still not corr\fct, try using th\f manual s\fttings or a di\b\b\fr\fnt r\fsolution or r\f\br\fsh rat\f on th\f PC.
Auto Con\bigur\f
1MENUSelect PICTURE.
2ENTERSelect Screen (RGB-PC).
3ENTERSelect Au\fo Config..
4ENTERSelect Yes.
5ENTERStart Auto Configuration.
ꔛ If the position of the image is still not 
correct, try Auto adjustment again.
ꔛ If picture needs to \fe adjusted again 
after  Auto  adjustment  in  RGB\bPC, 
you  can  adjust  the Posi\fion, Size or 
Phase.
PICTUREꔂ Move    ꔉ Enter
   •  Brightness  50   • Sharpness  70   • Color  60   • Tint  0   • Color Temp.  0   • Advanced Control   • Picture Reset• Screen (RGB-PC)
RGWC
ꔉꔠ
Auto Config.
Resolution
Position
Size
Phase
Reset
Auto Config.
YesNo
SCREENꔂ Move    � Prev.   
						

							EXTERNAL EQUIPMENT SETUP
EXTERNAL  EQUIPMENT  SETUP
50
I\b th\f pictur\f is not cl\far a\bt\fr auto adjustm\fnt or i\b t\fxt is shaking, adjust th\f pictur\f phas\f manually.
This \b\fatur\f op\frat\fs only in RGB-PC mod\f.
Adjustm\fnt \bor scr\f\fn Position, Siz\f, and Phas\f
1MENUSelect PICTURE.
2ENTERSelect Screen (RGB-PC).
3ENTERSelect Posi\fion, Size, or Phase.
4ENTERMake appropriate adjustments.
5ENTER
ꔛ Posi\fion:  This  function  is  to  adjust 
picture  to  left/right  and  up/down  as 
you prefer. 
ꔛ Size: This function is to minimize any 
vertical  \fars  or  stripes  visi\fle  on  the 
screen \fackground. And the horizon \b
tal screen size will also change.
ꔛ Phase:  This  function  allows  you  to 
remove  any  horizontal  noise  and 
clear  or  sharpen  the  image  of  char \b
acters.
PICTUREꔂ Move    ꔉ Enter
   •  Brightness  50   • Sharpness  70   • Color  60   • Tint  0   • Color Temp.  0   • Advanced Control   • Picture Reset• Screen (RGB-PC)
RGWC
ꔉꔠ
Auto Config.
Resolution
Position
Size
Phase
Reset
▲◀▶▼
SCREENꔂ Move    � Prev.