LG Television 19LE5300 User Manual

							31
PREPARATION
CABLE HOLDER
CABLE HOLDER
2After connecting the ca\fles as necessary, 
install the CABLE HOLDER as shown 
and \fundle the ca\fles.
1Secure the power cord with the  CABLE 
HOLDER on the TV \fack cover. 
It will help prevent the power ca\fle from 
\feing removed \fy accident.
32/37/42/47/55LE5300, 42/47/55LE530C 42/47/55LE7300
19/22/26LE5300, 22/26LE5500
1After connecting the ca\fles as necessary, 
install the 
CABLE HOLDER as shown 
and \fundle the ca\fles.
1 Install the CABLE MANAGEMENT  CLIP 
as shown.
2
Connect the ca\fles as necessary.
To connect additional equipment, see the 
EXTERNAL EQUIPMENT SETUP  section.
1
Connect the ca\fles as necessary.
To connect additional equipment, see the 
EXTERNAL EQUIPMENT SETUP section.
Install CABLE HOLDER as shown and 
\fundle the ca\fles.
CABLE HOLDER
FOR DESK-TYPE STAND 
FOR WALL MOUNT
CABLE MANAGEMENT CLIP
CABLE HOLDER   
						

							PREPARATION
PREPARATION
32
DESKTOP PEDESTAL INSTALLATION
SWIVEL STAND 
(Excep\f 19/22LE5300, 22LE5500)
After installing the TV, you can adjust the TV set manually to the left or right direction \fy 20 º to suit 
your viewing position.
ꔛ Image shown may differ from your TV.
For proper ventilation, allow a clearance of 10.1 cm (4 inch) on all four sides from the wall.
10.1 cm (4 inch)
10.1 cm (4 inch)
10.1 cm (4 inch)
10.1 cm (4 inch)!
?
!
?
CAUTION
► Ensure adequate ventilation \fy following the clearance recommendations.
► Do not mount near or a\fove any type of heat source.
KENSINGTON SECURITY SYSTEM
ꔛ This feature is not availa\fle for all models.
\b  The TV is equipped with a Kensington Security System con\b
nector on the \fack panel. Connect the Kensington Security 
System ca\fle as shown \felow.
\b For the detailed installation and use of the Kensington Security 
System, refer to the user’s guide provided with the Kensington 
Security System.
   For  further  information,  contact h\f\fp://www.kensing\fon.com, 
the internet homepage of the Kensington company. Kensington 
sells security systems for expensive electronic equipment such 
as note\fook PCs and LCD projectors.
NOTE: The Kensington Security System is an optional accessory.  
						

							33
PREPARATION
ATTACHING THE TV TO A DESK
(For 32/42LD420, 32/37/42LD450, 37/42LD450C, 32/42LD520, 42LD630, 32LE5300)
 The TV must \fe attached to a desk so it cannot \fe pulled in a forward/\fackward direction, poten\b
tially causing injury or damaging the product. 
ꔛ Image shown may differ from your TV.
1\bScrew
 ( provided as parts of the product)
Desk
Stand
!
?
!
?
WARNING
► To prevent TV from falling over, the TV should \fe securely attached to the floor/wall per installa \b
tion instructions. Tipping, shaking, or rocking the machine may cause injury.
4\bScrews
(not provided as parts of the product)
Desk
Stand
For 37/42/47LD450C
► Recommended screw size: M5 x L (*L: Ta\fle depth + 8~10 mm)
 ex) Ta\fle depth: 15mm, Screw: M5 x 25
For 55LD520C
4\bScrews
(not provided as parts of the product)   
						

							PREPARATION
PREPARATION
34
SECURING THE TV TO THE WALL TO PREVENT FALLING 
WHEN THE TV IS USED ON A STAND
 We recommend that you set up the TV close to a wall so it cannot fall over if pushed \fackwards. 
 Additionally, we recommend that the TV \fe attached to a wall so it cannot \fe pulled in a forward 
direction, potentially causing injury or damaging the product. 
 Caution: Please make sure that children don’t clim\f on or hang from the TV. 
ꔛ Insert the eye\b\folts (or TV \frackets and \folts) to tighten the product to the wall as shown in the 
picture. 
   *  If your product has the \folts in the eye\b\folts position \fefore inserting the eye\b\folts, loosen the 
\folts. 
   * Insert the eye\b\folts or TV \frackets/\folts and tighten them securely in the upper holes.
     Secure the wall \frackets with the \folts (sold separately) to the wall. Match the height of the \fracket 
that is mounted on the wall to the holes in the product. 
    Ensure the eye\b\folts or \frackets are tightened securely.
ꔛ Use a sturdy rope (sold separately) to tie the product. It is safer to tie the 
rope so it \fecomes horizontal \fetween the wall and the product.
ꔛ You  should  purchase  necessary  components  to  prevent  the  TV  from  tipping  over  (when  not  using  a 
wall mount).
ꔛ Image shown may differ from your TV.
!
?
!
?
NOTE
► Use a platform or ca\finet strong enough and large enough to support the size and weight of 
the TV.
►
 To use the TV safely make sure that the height of the \fracket on the wall and the one on the TV are 
the same.  
						

							35
PREPARATION
ANTENNA OR CABLE CONNECTION
ꔛ To prevent damage do not connect to the power outlet until all connections are made \fetween the 
devices.
ꔛ Image shown may differ from your TV.
1. An\fenna (Ana\bog or Digi\fa\b)
   Wall Antenna Socket or Outdoor Antenna without a Ca\fle Box 
Connections.
 For optimum picture quality, adjust antenna direction if needed.
2. Cab\be
Wa\b\b 
An\fenna  
Socke\f
Ou\fdoor 
An\fenna 
(VHF, UHF)
Cab\be TV 
Wa\b\b Jack
Mu\b\fi-fami\by Dwe\b\bings/Apar\fmen\fs
(Connec\f \fo wa\b\b an\fenna socke\f) RF Coaxia\b Wire (75 Ω)
RF Coaxia\b Wire (75  Ω)
Sing\be-fami\by Dwe\b\bings /Houses
(Connec\f \fo wa\b\b jack for ou\fdoor an\fenna)
Be carefu\b no\f \fo bend \fhe copper wire 
when connec\fing \fhe an\fenna.
Copper Wire
ꔛ If the antenna needs to \fe split for two TV’s, install a 2\bWay Signal Splitter.
ꔛ For much more information a\fout antennas visit our Knowledge\fase at  h\f\fp://\bgknow\bedgebase.
com. Search for antenna.
ANTENNA/ CABLE IN
RGB IN (PC)
LAN
WIRELESS CONTROL
AU\fIO INAU\fIO OUT
RGB/\fVI
RS-232C IN(SERVICE ONLY)
OPTICAL \fIGITAL
/\fVI IN
2 3
1
2
1VIDEOAUDIOL(MONO)R
VIDEOAUDIO
COMPONENT IN
AV IN 1
Y P\fPR
I
N 4
H/P U\b\f IN 1
U\b\f IN 2
AV IN 2VIDEO
AUDIO
L/MONO
R
CABLE  MANAGEMENT
AC  IN

LR
ANTENNA/
CABLE IN
RGB IN (PC)
LAN
WIRELESS CONTROL
AU\fIO INAU\fIO OUT
RGB/\fVI
RS-232C IN(SERVICE ONLY)
OPTICAL \fIGITAL
/\fVI IN
2 3
1
2
1VIDEOAUDIOL(MONO)R
VIDEOAUDIO
COMPONENT IN
AV IN 1
Y P\fPR
I
N 4
H/P U\b\f IN 1
U\b\f IN 2
AV IN 2VIDEO
AUDIO
L/MONO
R
CABLE  MANAGEMENT
AC  IN

LR   
						

							EXTERNAL EQUIPMENT SETUP
EXTERNAL  EQUIPMENT  SETUP
36
HD RECEIVER SETUP
ꔛ	To	prevent	the 	equipment 	damage\f 	ne ver 	plug 	in 	any 	po wer 	\b ords 	until 	y ou 	ha ve 	finished 	\b onne\bting 	all 	
equipment.
ꔛ	IThis	part	of 	E XTERNAL 	E QUIPMENT 	SETUP 	mainly 	us e 	pi\btur e 	o f 	f or 	2 6LE5300/26LE5500.
Y\f CB/PB\f CR/PR
1. How to connect
1Conne\bt	the	video 	output s 	(Y\f	PB\f	PR)	of	the 	
digital	set-top 	bo x 	t o 	the 	COMPONENT  IN 
VI\fEO 
or	1/2* ja\bks	on 	the 	T V. 	Ma t\bh 	the 	ja\bk 	
\bolors	(Y	= 	gr een\f 	PB	=	blue\f 	and 	PR	=	red).
\bConne\bt	the 	audio 	output 	o f 	the 	digital 	s et-top 	
box	to	the 	COMPONENT  IN  A\b\fIO or	1/2* 
ja\bks	on	the 	 TV.
2. How to use
ꔛ	Turn	on	the 	digital 	s et-top 	bo x. 	
	(Refer	to
	the 	o wner’s 	manual 	f or 	the 	digital 	s et-
top	box	oper ation.)	
ꔛ	Sele\bt	the Component or	Component1/2* input	
sour\be	on 	the 	 TV 	using 	the INP\bT button	on 	the 	
remote	\bontrol.
Component Connection
This TV can receive digital over-the-air/digital cable signals without an external digital set-top box. 
However\f if you do receive digital signals from a digital set-top box or other digital external device.
ResolutionHorizontal	Frequen\by(
kHz )Verti\bal	Frequen\by (
Hz )
720x480i 15.73
59.94
15.73 60.00
720x480p 31.47
59.94
31.50 60.00
1280x720p 44.96
59.94
45.00 60.00
1920x1080i33.7259.94
33.75 60.00
1920x1080p
26.9723.976
27.00 24.00
33.71 29.97
33.75 30.00
67.432 59.94
67.50 60.00
EXTERNAL EQ\bIPMENT SET\bP
ANTENNA/
CABLE IN
DC-IN
RGB IN (PC)
AUDIO INRGB/D\fI
(D\fI)
OPTICAL  DIGITALAUDIO OUT
/D\fI IN
A\f IN
RS-232C IN(CONTROL\bSER\fICE)
12
\fIDEOAUDIOL(MONO)R
VIDEO AUDIOY PBPRLR
COMPONENT IN
YLRPBPR
ANTENNA/
CABLE IN
DC-IN
R\fB IN (PC)
AUDIO IN
R\fB/DVIOPTICAL  DI\fITALAUDIO OUT
COMPONENT IN AV IN
RS-\b3\bC IN(CONTROL&SERVICE)
VIDEOAUDIOL(MONO)R
VIDEO
AUDIOY PBPRLR
(DVI)/DVI IN
12
HDMI OUTPUT
ANTENNA/
CA\fLE IN
DC-IN
R\b\f IN (PC)
AUDIO IN
R\b\f/DVIOPTICAL  DI\bITALAUDIO OUT
COMPONENT IN AV IN
RS-232C IN(CONTROL&SERVICE)
VIDEOAUDIOL(MONO)R
VIDEO
AUDIOY P\fPRLR
(DVI)/DVI IN
12
LRDVI OUTPUT
AUDIO
12
*		Component2: 	F or 	3 2/37/42/47/55LE5300\f 	
42/47/55LE7300\f	42/47/55LE530C
USB IN
IN 4
H/P
AV IN2
VIDEO / AUDIOY  PB  PR / AUDIO 
CO\fPONENT IN2
YLRPBPR
USB IN
I N 4
H/P
VIDEO / AUDIOAV IN2Y  PB  PR / AUDIO 
CO\fPONENT IN2
USB IN
IN 4
H/P
VIDEO / AUDIOAV IN2Y  PB  PR / AUDIO 
CO\fPONENT IN2
S-VIDEO
OUTPUT
SWITCH
ANT IN
ANT OUT
\bRVIDEO AUDIO
\bRVIDEO AUDIO
For 32/37/42/47/55LE5300, 
42/47/55LE7300, 42/47/55LE530C
1
2 
						

							37
EXTERNAL  EQUIPMENT  SETUP
HDMI Connection
1. How to connect
1Conne\bt	the	digital 	s et-top 	bo x 	t o 	H\fMI/\fVI IN 
1
\f	2\f	3*\f	or 	4** ja\bk	on 	the 	 TV.
\bNo	separate 	audio 	\b onne\btion 	is 	ne\b essary.
HDMI	supports	bo th 	audio 	and 	video .
2. How to use
ꔛ		Turn	on	the 	digital 	s et-top 	bo x. 	
				(Refer	to	the 	o wner’s 	manual 	f or 	the 	digital 	s et-
top	box.)	
ꔛ	Sele\bt	the	H\fMI1\f	H\fMI2\f	H\fMI3*\f	or	H\fMI4 ** 
input	sour\be 	on 	the 	 TV 	using 	the 	INP\bT	button	
on	the	remote 	\b ontrol.
!
?
!
?
NOTE
►	If	an	HDMI 	\b able 	doe sn’t 	s upport 	High 	Speed 	HDMI\f 	
it	\ban	\bause 	fli\bk ers 	or 	no 	s \breen 	display . 	In 	this 	\b ase 	
use	the	latest 	\b ables 	tha t 	s upport 	High 	Speed 	HDMI.
►	HDMI	Audio	S upported 	F ormat: 	Dolb y 	Digital 	( 32 	kHz\f 	44 .1 	
kHz\f	48	kHz)\f 	Line ar 	PCM 	( 32 	kHz\f 		44 .1 	kHz\f 	4 8 	kHz)
H\fMI-\fTV
ResolutionHorizontal	Frequen\by(
kHz )Verti\bal	Frequen\by (
Hz )
720x480p
31.47	59.94
31.50 60.00
1280x720p 44.96
59.94
45.00 60.00
1920x1080i33.7259.94
33.75 60.00
1920x1080p
26.9723.976
27.00 24.00
33.71 29.97
33.75 30.00
67.432 59.94
67.50 60.00
ANTENNA/
CABLE IN
DC-IN
RGB IN (PC)
AUDIO IN
RGB/D\fI
(D\fI)OPTICAL 
DIGITALAUDIO OUT
/D\fI IN
A\f IN
RS-232C IN(CONTROL\bSER\fICE)
12
\fIDEOAUDIOL(MONO)R
VIDEO AUDIOY PBPRLR
COMPONENT IN
YLRPBPR
ANTENNA/
CABLE IN
DC-IN
R\fB IN (PC)
AUDIO INR\fB/DVIOPTICAL  DI\fITALAUDIO OUT
COMPONENT IN AV IN
RS-\b3\bC IN(CONTROL&SERVICE)
VIDEOAUDIOL(MONO)R
VIDEO
AUDIOY PBPRLR
(DVI)/DVI IN
12
HDMI OUTPUT
ANTENNA/
CA\fLE IN
DC-IN
R\b\f IN (PC)
AUDIO IN
R\b\f/DVIOPTICAL  DI\bITALAUDIO OUT
COMPONENT IN AV IN
RS-232C IN(CONTROL&SERVICE)
VIDEOAUDIOL(MONO)R
VIDEO
AUDIOY P\fPRLR
(DVI)/DVI IN
12
LRDVI OUTPUT
AUDIO
1
*		HDMI3: 	For 	2 6LE5300\f 	2 6LE5500\f 	3 2/42/47/55LD520\f 	55LD520C\f	42/47/55LD630
**		HDMI4:	F or 	3 2/37/42/47/55LE5300\f 	4 2/47/55LE7300\f 	42/47/55LE530C   
						

							EXTERNAL EQUIPMENT SETUP
EXTERNAL  EQUIPMENT  SETUP
38
DVI to HDMI Connection
1. How to connect
1Conne\bt	the	D VI 	output 	o f 	the 	digital 	s et-top 	
box	to	the 	H\fMI/\fVI IN 1	or	2*	ja\bk 	on 	the 	T V.
\bConne\bt	the	digital 	s et-top 	bo x 	audio 	output 	t o 	
the	A\b\fIO IN (
RGB/\fVI )	ja\bk
	on 	the 	 TV.
2. How to use
ꔛ		Turn	on	the 	digital 	s et-top 	bo x. 	
				(Refer	to	the 	o wner’s 	manual 	f or 	the 	digital 	s et-
top	box.)	
ꔛ		Sele\bt	the	H\fMI1	or	H\fMI2*	input 	sour\be 	on 	the 	
TV	using	the 	INP\bT	button	on	the 	r emote 	\b ontrol.
!
?
!
?
NOTE
►	A	DVI	to 	HDMI 	\b able 	or 	adap ter 	is 	r equired 	f or 	this 	\b on-
ne\btion.	DVI	doe sn't 	s upport 	audio \f 	s o 	a 	s eparate 	audio 	
\bonne\btion	is	ne\b essary.
ANTENNA/
CABLE IN
DC-IN
RGB IN (PC)
AUDIO IN
RGB/D\fI
(D\fI)OPTICAL 
DIGITALAUDIO OUT
/D\fI IN
A\f IN
RS-232C IN(CONTROL\bSER\fICE)
12
\fIDEOAUDIOL(MONO)R
VIDEO AUDIOY PBPRLR
COMPONENT IN
YLRPBPR
ANTENNA/
CABLE IN
DC-IN
R\fB IN (PC)
AUDIO IN
R\fB/DVIOPTICAL  DI\fITALAUDIO OUT
COMPONENT IN AV IN
RS-\b3\bC IN(CONTROL&SERVICE)
VIDEOAUDIOL(MONO)R
VIDEO
AUDIOY PBPRLR
(DVI)/DVI IN
12
HDMI OUTPUT
ANTENNA/
CA\fLE IN
DC-IN
R\b\f IN (PC)
AUDIO INR\b\f/DVIOPTICAL  DI\bITALAUDIO OUT
COMPONENT IN AV IN
RS-232C IN(CONTROL&SERVICE)
VIDEOAUDIOL(MONO)R
VIDEO
AUDIOY P\fPRLR
(DVI)/DVI IN
12
LRDVI OUTPUT
AUDIO
1
2
*	HDMI2: 	For 	3 2/42/47/55LD520\f 	55LD52 0C\f 	4 2/47/55LD630 
						

							39
EXTERNAL  EQUIPMENT  SETUP
DVD SETUP
Component Input ports
To get better picture quality\f connect a DVD 
player to the component input ports as shown 
below.
1. How to connect
1Conne\bt	the	video 	output s 	(Y\f	PB\f	PR)	 	of	the 	
DVD	to	the 	COMPONENT  IN  VI\fEO or	1/2* 
ja\bks	on	the 	T V. 	Ma t\bh 	the 	ja\bk 	\b olors 	(Y	=	
green\f	PB	=	blue\f 	and 	PR	=	red)
.
\bConne\bt	the 	audio 	output s 	o f 	the 	D VD 	t o 	the 	
COMPONENT  IN  A\b\fIO or	1/2* ja\bks	on	the 	
TV.
2. How to use
ꔛ	Turn	on	the 	D VD 	play er\f 	ins ert 	a 	D VD.
ꔛ	Sele\bt	the Component or	Component1/2* input	
sour\be	on 	the 	T V 	using 	the INP\bT button	on 	the 	
remote	\bontrol.
ꔛ	Refer	to	the	D VD	p layer’s	m anual	f or	o perating 	
instru\btions.
Component Connection
	Component	por ts 	on 	
the	TV
YPBPR
Video	output 	por ts 	
on	DVD	play er
YPBPR
YB-Y R-Y
Y Cb Cr
Y Pb Pr
ANTENNA/
CABLE IN
DC-IN
RGB IN (PC)
AUDIO IN
RGB/D\fI
(D\fI)OPTICAL 
DIGITALAUDIO OUT
/D\fI IN
COMPONENT IN
RS-2\b2C IN(CONTROL&SER\fICE)
12
\fIDEO AUDIOY PBPRLR
ANTENNA/
CABLE IN
DC-IN
RGB IN (PC)
AUDIO INRGB/D\fI
(D\fI)OPTICAL 
DIGITALAUDIO OUT
/D\fI IN
A\f IN
RS-2\b2C IN(CONTROL&SER\fICE)
12
\fIDEOAUDIOL(MONO)R
\fIDEO AUDIOY PBPRLR
COMPONENT IN
YLRPBPR
ANTENNA/
CABLE IN
DC-IN
RGB IN (PC)
AUDIO IN
RGB/D\fIOPTICAL  DIGITALAUDIO OUT
COMPONENT IN A\f IN
RS-2\b2C IN(CONTROL&SER\fICE)
\fIDEOAUDIOL(MONO)R
\fIDEO
AUDIOY PBPRLR
(DVI)/DVI IN
12
HDMI OUTPUT
AV INVIDEOAUDIOL(MONO)\f
L\fVIDEO
AUDIO
12
USB IN
IN 4
H/P
AV IN2
VIDEO / AUDIOY  PB  PR / AUDIO 
CO\fPONENT IN2
YLRPBPR
USB IN
I N 4
H/P
VIDEO / AUDIOAV IN2Y  PB  PR / AUDIO 
CO\fPONENT IN2
USB IN
IN 4
H/P
VIDEO / AUDIOAV IN2Y  PB  PR / AUDIO 
CO\fPONENT IN2
S-VIDEO
OUTPUT
SWITCH
ANT IN
ANT OUT
\bRVIDEO AUDIO
\bRVIDEO AUDIO
For 32/37/42/47/55LE5300, 
42/47/55LE7300, 42/47/55LE530C
1
2
*		Component2: 	F or 	3 2/37/42/47/55LE5300\f 	
42/47/55LE7300\f	42/47/55LE530C   
						

							EXTERNAL EQUIPMENT SETUP
EXTERNAL  EQUIPMENT  SETUP
40
Composit\f (RCA) Conn\fction
1. How \fo connec\f
1Connect  the AUDIO/VIDEO  jacks  \fetween  TV 
and DVD. Match the jack colors (Video = yellow, 
Audio Left = white, and Audio Right = red)
2. How \fo use
ꔛ Turn on the DVD player, insert a DVD.
ꔛ Select  the  AV or AV1/2*  input  source  on  the  TV 
using the  INPUT \futton on the remote control.  
ꔛ Refer  to  the  DVD  player's  manual  for  operating 
instructions.
ANTENNA/
CABLE IN
DC-IN
RGB IN (PC)
AUDIO INRGB/D\fI
(D\fI)
OPTICAL  DIGITALAUDIO OUT
/D\fI IN
COMPONENT IN
RS-2\b2C IN(CONTROL&SER\fICE)
12
\fIDEO AUDIOY PBPRLR
ANTENNA/
CABLE IN
DC-IN
RGB IN (PC)
AUDIO IN
RGB/D\fI
(D\fI)OPTICAL 
DIGITALAUDIO OUT
/D\fI IN
A\f IN
RS-2\b2C IN(CONTROL&SER\fICE)
12
\fIDEOAUDIOL(MONO)R
\fIDEO AUDIOY PBPRLR
COMPONENT IN
YLRPBPR
ANTENNA/
CABLE IN
DC-IN
RGB IN (PC)
AUDIO IN
RGB/D\fIOPTICAL  DIGITALAUDIO OUT
COMPONENT IN A\f IN
RS-2\b2C IN(CONTROL&SER\fICE)
\fIDEOAUDIOL(MONO)R
\fIDEO
AUDIOY PBPRLR
(DVI)/DVI IN
12
HDMI OUTPUT
AV INVIDEOAUDIOL(MONO)\f
L\fVIDEO
AUDIO
ANTENNA/CABLE IN
DC-IN
RGB IN (PC)
AUDIO IN
RGB/D\fI
(D\fI)OPTICAL 
DIGITALAUDIO OUT
/D\fI IN
COMPONENT IN
RS-2\b2C IN(CONTROL&SER\fICE)
12
\fIDEO AUDIOY PBPRLR
ANTENNA/
CABLE IN
DC-IN
RGB IN (PC)
AUDIO IN
RGB/D\fI
(D\fI)OPTICAL 
DIGITALAUDIO OUT
/D\fI IN
A\f IN
RS-2\b2C IN(CONTROL&SER\fICE)
12
\fIDEOAUDIOL(MONO)R
\fIDEO AUDIOY PBPRLR
COMPONENT IN
YLRPBPR
ANTENNA/
CABLE IN
DC-IN
RGB IN (PC)
AUDIO INRGB/D\fIOPTICAL  DIGITALAUDIO OUT
COMPONENT IN A\f IN
RS-2\b2C IN(CONTROL&SER\fICE)
\fIDEOAUDIOL(MONO)R
\fIDEO
AUDIOY PBPRLR
(DVI)/DVI IN
12
HDMI OUTPUT
AV INVIDEOAUDIOL(MONO)\f
L\fVIDEO
AUDIO
1
1
HDMI Conn\fction
1. How \fo connec\f
1Connect the HDMI output of the DVD to the 
HDMI/DVI IN 1,  2, 3*, or  4** jack on the TV.
2No separate audio connection is necessary.
HDMI supports \foth audio and video.
2. How \fo use
ꔛ Select the  HDMI1, HDMI2 , HDMI3 *, or HDMI4 ** input 
source  on  the  TV  using  the  INPUT
 \futton  on  the 
remote control.
ꔛ Refer  to  the  DVD  player's  manual  for  operating 
instructions.
!
?
!
?
NOTE
► If an HDMI ca\fle doesn’t support High Speed HDMI, 
it can cause flickers or no screen display. In this case 
use the latest ca\fles that support High Speed HDMI.
► HDMI Audio Supported Format: Dol\fy Digital (32 kHz, 44.1 
kHz, 48 kHz), Linear PCM (32 kHz, 44.1 kHz, 48 kHz)
* AV2: Except 19/22/26LE5300, 22/26LE5500
*  HDMI3: For 26LE5300, 26LE5500, 32/42/47/55LD520, 
55LD520C, 42/47/55LD630
**  HDMI4: For 32/37/42/47/55LE5300, 42/47/55LE7300, 
42/47/55LE530C