LG M3201c Users Guide
Have a look at the manual LG M3201c Users Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1069 LG manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 46
Transmission / Receiving Protocol
01. Power(Command : a)To control Power On/Off of the Set.
Transmission
[k][a][ ][Set ID][ ][Data][Cr]
Data 0 : Power Off 1 : Power On
Acknowledgement
[a][ ][Set ID][ ][OK][Data][x]
To show the status of Power On/Off.
Transmission
[k][a][ ][Set ID][ ][FF][Cr]
Acknowledgement
[a][ ][Set ID][ ][OK][Data][x]
Data 0 : Power Off 1 : Power On
02. Input Select (Command : b) (Main Picture Input) To select input source for the Set.
You can also select an input...](http://img.usermanuals.tech/thumb/47/54054/w64_lg_m3201c-user-s-guide-45.png "Page 46
Transmission / Receiving Protocol
01. Power(Command : a)To control Power On/Off of the Set.
Transmission
[k][a][ ][Set ID][ ][Data][Cr]
Data 0 : Power Off 1 : Power On
Acknowledgement
[a][ ][Set ID][ ][OK][Data][x]
To show the status of Power On/Off.
Transmission
[k][a][ ][Set ID][ ][FF][Cr]
Acknowledgement
[a][ ][Set ID][ ][OK][Data][x]
Data 0 : Power Off 1 : Power On
02. Input Select (Command : b) (Main Picture Input) To select input source for the Set.
You can also select an input...")
![Page 47
03. Aspect Ratio(Command : c) (Main picture format)To adjust the screen format.
You can also adjust the screen format using the ARC
(Aspect Ratio Control) button on remote control or in the
Screen menu.
Transmission
[k][c][ ][Set ID][ ][Data][Cr]
Data 1 : Normal Screen (4:3) 5 : Zoom2 2 : Wide Screen (16 :9) 6 : Original
3 : Horizon (Spectacle) 7 : 14 : 9
4 : Zoom1 8 : Full (Europe version only) 9 : 1 : 1 (PC)
Acknowledgement
[c][ ][Set ID][ ][OK][Data][x]...](http://img.usermanuals.tech/thumb/47/54054/w64_lg_m3201c-user-s-guide-46.png "Page 47
03. Aspect Ratio(Command : c) (Main picture format)To adjust the screen format.
You can also adjust the screen format using the ARC
(Aspect Ratio Control) button on remote control or in the
Screen menu.
Transmission
[k][c][ ][Set ID][ ][Data][Cr]
Data 1 : Normal Screen (4:3) 5 : Zoom2 2 : Wide Screen (16 :9) 6 : Original
3 : Horizon (Spectacle) 7 : 14 : 9
4 : Zoom1 8 : Full (Europe version only) 9 : 1 : 1 (PC)
Acknowledgement
[c][ ][Set ID][ ][OK][Data][x]...")
![Page 48
05. Volume Mute(Command : e) To control On/Off of the Volume Mute.
Transmission
[k][e][ ][Set ID][ ][Data][Cr]
Data 0 : Volume Mute On (Volume Off) 1 : Volume Mute Off (Volume On)
Acknowledgement
[e][ ][Set ID][ ][OK][Data][x]
Data 0 : Volume Mute On (Volume Off) 1 : Volume Mute Off (Volume On)
06. Volume Control(Command : f) To adjust Volume .
Transmission
[k][f][ ][Set ID][ ][Data][Cr]
Data Min : 00H ~ Max : 64H (Hexadecimal code)
Acknowledgement
[f][ ][Set ID][ ][OK][Data][x]
Data Min : 00H ~ Max...](http://img.usermanuals.tech/thumb/47/54054/w64_lg_m3201c-user-s-guide-47.png "Page 48
05. Volume Mute(Command : e) To control On/Off of the Volume Mute.
Transmission
[k][e][ ][Set ID][ ][Data][Cr]
Data 0 : Volume Mute On (Volume Off) 1 : Volume Mute Off (Volume On)
Acknowledgement
[e][ ][Set ID][ ][OK][Data][x]
Data 0 : Volume Mute On (Volume Off) 1 : Volume Mute Off (Volume On)
06. Volume Control(Command : f) To adjust Volume .
Transmission
[k][f][ ][Set ID][ ][Data][Cr]
Data Min : 00H ~ Max : 64H (Hexadecimal code)
Acknowledgement
[f][ ][Set ID][ ][OK][Data][x]
Data Min : 00H ~ Max...")
![Page 49
Controlling the Multiple ProductRS-232C
A7
Transmission / Receiving Protocol
07. Contrast(Command : g)To adjust screen contrast.
You can also adjust the contrast in the Picture menu.
Transmission
[k][g][ ][Set ID][ ][Data][Cr]
Data Min : 00H ~ Max : 64H
• Refer to ‘Real data mapping’ as shown below.
Acknowledgement
[g][ ][Set ID][ ][OK][Data][x]
* Real data mapping 0 : Step 0:
A : Step 10 :
F : Step 15
10 : Step 16 :
64 : Step 100
08. Brightness(Command : h) To adjust screen brightness.
You can...](http://img.usermanuals.tech/thumb/47/54054/w64_lg_m3201c-user-s-guide-48.png "Page 49
Controlling the Multiple ProductRS-232C
A7
Transmission / Receiving Protocol
07. Contrast(Command : g)To adjust screen contrast.
You can also adjust the contrast in the Picture menu.
Transmission
[k][g][ ][Set ID][ ][Data][Cr]
Data Min : 00H ~ Max : 64H
• Refer to ‘Real data mapping’ as shown below.
Acknowledgement
[g][ ][Set ID][ ][OK][Data][x]
* Real data mapping 0 : Step 0:
A : Step 10 :
F : Step 15
10 : Step 16 :
64 : Step 100
08. Brightness(Command : h) To adjust screen brightness.
You can...")
![Page 50
Controlling the Multiple ProductRS-232C
A8
Transmission / Receiving Protocol
09. Color(Command : i) (Video only)To adjust the screen color.You can also adjust the color in the Picture menu.
Transmission
[k][i][ ][Set ID][ ][Data][Cr]
Data Min : 00H ~ Max : 64H (Hexadecimal code)
• Refer to ‘Real data mapping’ page A7.
Acknowledgement
[i][ ][Set ID][ ][OK][Data][x]
Data Min : 00H ~ Max : 64H
10. Tint(Command : j) (Video only) To adjust the screen tint.You can also adjust the tint in the Picture menu....](http://img.usermanuals.tech/thumb/47/54054/w64_lg_m3201c-user-s-guide-49.png "Page 50
Controlling the Multiple ProductRS-232C
A8
Transmission / Receiving Protocol
09. Color(Command : i) (Video only)To adjust the screen color.You can also adjust the color in the Picture menu.
Transmission
[k][i][ ][Set ID][ ][Data][Cr]
Data Min : 00H ~ Max : 64H (Hexadecimal code)
• Refer to ‘Real data mapping’ page A7.
Acknowledgement
[i][ ][Set ID][ ][OK][Data][x]
Data Min : 00H ~ Max : 64H
10. Tint(Command : j) (Video only) To adjust the screen tint.You can also adjust the tint in the Picture menu....")
![Page 51
Controlling the Multiple ProductRS-232C
A9
11. Sharpness(Command : k) (Video only)To adjust the screen Sharpness.
You can also adjust the sharpness in the Picture menu.
Transmission
[k][k][ ][Set ID][ ][Data][Cr]
Data Min : 00H ~ Max : 64H (Hexadecimal code)
• Refer to ‘Real data mapping’ page A7.
Acknowledgement
[k][ ][Set ID][ ][OK][Data][x]
Data Min : 00H ~ Max : 64H
12. OSD Select(Command : l) To control OSD on/off to the set.
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Data 0 : OSD Off 1...](http://img.usermanuals.tech/thumb/47/54054/w64_lg_m3201c-user-s-guide-50.png "Page 51
Controlling the Multiple ProductRS-232C
A9
11. Sharpness(Command : k) (Video only)To adjust the screen Sharpness.
You can also adjust the sharpness in the Picture menu.
Transmission
[k][k][ ][Set ID][ ][Data][Cr]
Data Min : 00H ~ Max : 64H (Hexadecimal code)
• Refer to ‘Real data mapping’ page A7.
Acknowledgement
[k][ ][Set ID][ ][OK][Data][x]
Data Min : 00H ~ Max : 64H
12. OSD Select(Command : l) To control OSD on/off to the set.
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Data 0 : OSD Off 1...")
![Page 52
Controlling the Multiple ProductRS-232C
A10
Transmission / Receiving Protocol
14 Balance(Command : t)To adjust the sound balance.
Transmission
[k][t][ ][Set ID][ ][Data][Cr]
Data Min : 00H ~ Max : 64H (Hexadecimal code)
• Refer to ‘Real data mapping’ page A7.
Acknowledgement
[t][ ][Set ID][ ][OK][Data][x]
Data Min : 00H ~ Max : 64H
* Balance : L50 ~ R50
15. Color Temperature (Command : u) To adjust the screen color temperature.
Transmission
[k][u][ ][Set ID][ ][Data][Cr]
Data 0 : Normal 1 : Cool
2 :...](http://img.usermanuals.tech/thumb/47/54054/w64_lg_m3201c-user-s-guide-51.png "Page 52
Controlling the Multiple ProductRS-232C
A10
Transmission / Receiving Protocol
14 Balance(Command : t)To adjust the sound balance.
Transmission
[k][t][ ][Set ID][ ][Data][Cr]
Data Min : 00H ~ Max : 64H (Hexadecimal code)
• Refer to ‘Real data mapping’ page A7.
Acknowledgement
[t][ ][Set ID][ ][OK][Data][x]
Data Min : 00H ~ Max : 64H
* Balance : L50 ~ R50
15. Color Temperature (Command : u) To adjust the screen color temperature.
Transmission
[k][u][ ][Set ID][ ][Data][Cr]
Data 0 : Normal 1 : Cool
2 :...")
![Page 53
Controlling the Multiple ProductRS-232C
A11
Transmission / Receiving Protocol
16. Abnomal state (Command : z)Abnormal State : Used to Read the power off status when Stand-by mode.
Transmission
[k][z][ ][Set ID][ ][Data][Cr]
Data FF : Read 0 : Normal (Power on and signal exist)
1: No signal (Power on)
2 : Turn the monitor off by remote control
3 : Turn the monitor off by sleep time function
4 : Turn the monitor off by RS-232C function
6 : AC down
8 : Turn the monitor off by off time function
9 : Turn...](http://img.usermanuals.tech/thumb/47/54054/w64_lg_m3201c-user-s-guide-52.png "Page 53
Controlling the Multiple ProductRS-232C
A11
Transmission / Receiving Protocol
16. Abnomal state (Command : z)Abnormal State : Used to Read the power off status when Stand-by mode.
Transmission
[k][z][ ][Set ID][ ][Data][Cr]
Data FF : Read 0 : Normal (Power on and signal exist)
1: No signal (Power on)
2 : Turn the monitor off by remote control
3 : Turn the monitor off by sleep time function
4 : Turn the monitor off by RS-232C function
6 : AC down
8 : Turn the monitor off by off time function
9 : Turn...")
![Page 54
Controlling the Multiple ProductRS-232C
A12
18. Auto Configure(Command: j u)To adjust picture position and minimize image shaking
automatically. it works only in RGB(PC) mode.
Transmission
[j][u][ ][Set ID][ ][Data][Cr]
Data 1 : To set
Acknowledgement
[u][ ][Set ID][ ][OK][Data][x]
19. Key(Command : m c) To send IR remote key code.
Transmission
[m][c][ ][Set ID][ ][Data][Cr]
Data Key code : Refer to page A18.
Acknowledgement
[c][ ][Set ID][ ][OK][Data][x]
Transmission / Receiving Protocol](http://img.usermanuals.tech/thumb/47/54054/w64_lg_m3201c-user-s-guide-53.png "Page 54
Controlling the Multiple ProductRS-232C
A12
18. Auto Configure(Command: j u)To adjust picture position and minimize image shaking
automatically. it works only in RGB(PC) mode.
Transmission
[j][u][ ][Set ID][ ][Data][Cr]
Data 1 : To set
Acknowledgement
[u][ ][Set ID][ ][OK][Data][x]
19. Key(Command : m c) To send IR remote key code.
Transmission
[m][c][ ][Set ID][ ][Data][Cr]
Data Key code : Refer to page A18.
Acknowledgement
[c][ ][Set ID][ ][OK][Data][x]
Transmission / Receiving Protocol")
![Page 55
Controlling the Multiple ProductRS-232C
A13
20. Tile Mode(Command : d d)Change a Tile Mode.
Transmission
[d][d][][Set ID][][Data][x]
* The data can not be set to 0X or X0 except 00.
Acknowledgement
[d][][00][][OK/NG][Data][x]
Transmission / Receiving Protocol
DataDescription
00Tile mode is off.
121 x 2 mode(column x row)
131 x 3 mode
141 x 4 mode
......
444 x 4 mode](http://img.usermanuals.tech/thumb/47/54054/w64_lg_m3201c-user-s-guide-54.png "Page 55
Controlling the Multiple ProductRS-232C
A13
20. Tile Mode(Command : d d)Change a Tile Mode.
Transmission
[d][d][][Set ID][][Data][x]
* The data can not be set to 0X or X0 except 00.
Acknowledgement
[d][][00][][OK/NG][Data][x]
Transmission / Receiving Protocol
DataDescription
00Tile mode is off.
121 x 2 mode(column x row)
131 x 3 mode
141 x 4 mode
......
444 x 4 mode")
![Page 56
Controlling the Multiple ProductRS-232C
A14
21. Tile H Size(Command : d g)To set the Horizontal size.
Transmission
[d][g][][Set ID][][Data][x]
Data Min : 00H ~ Max : 64H
Acknowledgement
[g][][Set ID][][OK/NG][Data][x]
22. Tile V Size(Command : d h) To set the Vertical size.
Transmission
[d][h][][Set ID][][Data][x]
Data Min : 00H ~ Max : 64H
Acknowledgement
[h][][Set ID][][OK/NG][Data][x]
Transmission / Receiving Protocol](http://img.usermanuals.tech/thumb/47/54054/w64_lg_m3201c-user-s-guide-55.png "Page 56
Controlling the Multiple ProductRS-232C
A14
21. Tile H Size(Command : d g)To set the Horizontal size.
Transmission
[d][g][][Set ID][][Data][x]
Data Min : 00H ~ Max : 64H
Acknowledgement
[g][][Set ID][][OK/NG][Data][x]
22. Tile V Size(Command : d h) To set the Vertical size.
Transmission
[d][h][][Set ID][][Data][x]
Data Min : 00H ~ Max : 64H
Acknowledgement
[h][][Set ID][][OK/NG][Data][x]
Transmission / Receiving Protocol")
Controlling the Multiple ProductRS-232C A9 11. Sharpness(Command : k) (Video only)To adjust the screen Sharpness. You can also adjust the sharpness in the Picture menu. Transmission [k][k][ ][Set ID][ ][Data][Cr] Data Min : 00H ~ Max : 64H (Hexadecimal code) • Refer to ‘Real data mapping’ page A7. Acknowledgement [k][ ][Set ID][ ][OK][Data][x] Data Min : 00H ~ Max : 64H 12. OSD Select(Command : l) To control OSD on/off to the set. Transmission [k][l][ ][Set ID][ ][Data][Cr] Data 0 : OSD Off 1 : OSD On Acknowledgement [l][ ][Set ID][ ][OK][Data][x] Data 0 : OSD Off 1 : OSD On 13. Remote Lock /Key Lock (Command : m) To control Remote Lock on/off to the set.This function, when controlling RS-232C, locks the remote control and th\ e local keys. Transmission [k][m][ ][Set ID][ ][Data][Cr] Data 0 : Off 1 : On Acknowledgement [m][ ][Set ID][ ][OK][Data][x] Data 0 : Off 1 : On Transmission / Receiving Protocol
Controlling the Multiple ProductRS-232C A10 Transmission / Receiving Protocol 14 Balance(Command : t)To adjust the sound balance. Transmission [k][t][ ][Set ID][ ][Data][Cr] Data Min : 00H ~ Max : 64H (Hexadecimal code) • Refer to ‘Real data mapping’ page A7. Acknowledgement [t][ ][Set ID][ ][OK][Data][x] Data Min : 00H ~ Max : 64H * Balance : L50 ~ R50 15. Color Temperature (Command : u) To adjust the screen color temperature. Transmission [k][u][ ][Set ID][ ][Data][Cr] Data 0 : Normal 1 : Cool 2 : Warm 3 : User Acknowledgement [u][ ][Set ID][ ][OK][Data][x] Data 0 : Normal 1 : Cool 2 : Warm 3 : User
Controlling the Multiple ProductRS-232C A11 Transmission / Receiving Protocol 16. Abnomal state (Command : z)Abnormal State : Used to Read the power off status when Stand-by mode. Transmission [k][z][ ][Set ID][ ][Data][Cr] Data FF : Read 0 : Normal (Power on and signal exist) 1: No signal (Power on) 2 : Turn the monitor off by remote control 3 : Turn the monitor off by sleep time function 4 : Turn the monitor off by RS-232C function 6 : AC down 8 : Turn the monitor off by off time function 9 : Turn the monitor off by auto off function Acknowledgement [z][ ][Set ID][ ][OK][Data][x] 17. ISM mode(Command: j p) Used to select the afterimage preventing function. Transmission [j][p][ ][Set ID][ ][Data][Cr] Data 1 : Inversion 2 : Orbiter 4 : White Wash 8 : Normal Acknowledgement [p][ ][Set ID][ ][OK][Data][x]
Controlling the Multiple ProductRS-232C A12 18. Auto Configure(Command: j u)To adjust picture position and minimize image shaking automatically. it works only in RGB(PC) mode. Transmission [j][u][ ][Set ID][ ][Data][Cr] Data 1 : To set Acknowledgement [u][ ][Set ID][ ][OK][Data][x] 19. Key(Command : m c) To send IR remote key code. Transmission [m][c][ ][Set ID][ ][Data][Cr] Data Key code : Refer to page A18. Acknowledgement [c][ ][Set ID][ ][OK][Data][x] Transmission / Receiving Protocol
Controlling the Multiple ProductRS-232C A13 20. Tile Mode(Command : d d)Change a Tile Mode. Transmission [d][d][][Set ID][][Data][x] * The data can not be set to 0X or X0 except 00. Acknowledgement [d][][00][][OK/NG][Data][x] Transmission / Receiving Protocol DataDescription 00Tile mode is off. 121 x 2 mode(column x row) 131 x 3 mode 141 x 4 mode ...... 444 x 4 mode
Controlling the Multiple ProductRS-232C A14 21. Tile H Size(Command : d g)To set the Horizontal size. Transmission [d][g][][Set ID][][Data][x] Data Min : 00H ~ Max : 64H Acknowledgement [g][][Set ID][][OK/NG][Data][x] 22. Tile V Size(Command : d h) To set the Vertical size. Transmission [d][h][][Set ID][][Data][x] Data Min : 00H ~ Max : 64H Acknowledgement [h][][Set ID][][OK/NG][Data][x] Transmission / Receiving Protocol
Controlling the Multiple ProductRS-232C A15 23. Tile ID Set(Command : d i)To assign the Tile ID for Tiling function . Transmission [d][i][][Set ID][][Data][x] Data Min : 00H ~ Max : 10H (Hexadecimal code) Acknowledgement [i][][Set ID][][OK/NG][Data][x] 24. Elapsed time return(Command : d l) To read the elapsed time. Transmission [d][l][][Set ID][][Data][x] * The data is always FF(in Hex). Acknowledgement [l][][Set ID][][OK/NG][Data][x] * The data means used hours. (Hexadecimal code) Transmission / Receiving Protocol
Controlling the Multiple ProductRS-232C A16 25. Temperature value (Command : d n) To read the inside temperature value. Transmission [d][n][][Set ID][][Data][x] * The data is always FF(in Hex). Acknowledgement [n][][Set ID][][OK/NG][Data][x] * The data is 1 byte long in Hexadecimal. 26. Lamp fault Check(Command : d p) To check lamp fault. Transmission [d][p][][Set ID][][Data][x] * The data is always FF(in Hex). Acknowledgement [p][][Set ID][][OK/NG][Data][x] Data 0 : Lamp Fault 1: Lamp OK Transmission / Receiving Protocol
IR CodesRS-232C A17 How to connect Remote Control IR Code Connect your wired remote control to Remote Control port on the Product.\ Output waveform single pulse, modulated with 37.917KHz signal at 455KHz Carrier frequency FCAR = 1/Tc = fosc/12 Duty ratio = T1/Tc = 1/3 Configuration of frame • 1st frameT1 Lead code Low custom code High custom code Data code Data code C0 C1 C2 C3 C4 C5 C6 C7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7 Tc Tf • Repeat frame Repeat code Lead code Repeat code 9ms Bit description • Bit 0 • Bit 1 2.25ms 9ms 0.55ms 0.56ms 1.12ms0.56ms 2.24ms Frame interval : Tf • The waveform is transmitted as long as a key is depressed. TfTf Tf=108ms@455KHz 4.5ms
RS-232C A18 00 01 02 03 08 C4 C5 09 98 0B 0E 43 5B 6E 44 10 11 12 13 14 15 16 17 18 19 5A BF D4 D5 D7 C6 79 76 77 AF 99 VOL( ) VOL( ) POWER ON/OFF POWER ON POWER OFF MUTE AV INPUT SLEEP MENU EXIT PSM SET Number Key 0 Number Key 1 Number Key 2 Number Key 3 Number Key 4 Number Key 5 Number Key 6 Number Key 7 Number Key 8 Number Key 9 AV COMPONENT1 COMPONENT2 RGB PC RGB DTV HDMI/DVI ARC ARC (4:3) ARC (16:9) ARC (ZOOM) AUTO CONFIC R/C Button R/C Button R/C Button R/C Button PR/C Button (Power On/Off) Discrete IR Code(Only Power On) Discrete IR Code(Only Power On) R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button Discrete IR Code(Input AV Selection) Discrete IR Code(Input COMPONENT1 Selection) Discrete IR Code(Input COMPONENT2 Selection) Discrete IR Code(Input RGB PC Selection) Discrete IR Code(Input RGB DTV Selection) Discrete IR Code(Input HDMI/DVI Selection) R/C Button Discrete IR Code(Only 4:3 mode) Discrete IR Code(Only 16:9 mode) Discrete IR Code(Only ZOOM1, ZOOM2 mode) Discrete IR Code Code(Hexa) Function Note IR Codes