LG M3201c Users Guide

							
Make sure to read the Important Precautions before using the product. 
Keep the Users Guide(CD) in an accessible place for furture reference\
.
See the label attached on the product and give the information to your de\
aler when you ask
for service.
M3201C
M3701C
M4201C
User’s Guide
 
						

							
1
Safety Precautions
Please read these safety precautions carefully before using the product.\

If you ignore the caution message, you may be slightly injured or the pr\
oduct may be damaged
If you ignore the warning message, you may be seriously injured or there\
 is a possibility of
accident or death.WarningCaution

Precautions in installing the Product
Keep away from heat sources like electrical heaters.- Electrical shock, fire, malfunction or deformation may occur.
Keep the packing anti-moisture material or vinyl packing out of the reac\
h of children. - Anti-moisture material is harmful if swallowed. If swallowed by mistake,\
 force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Kee\
p it out of the reach of children.
Do not put heavy objects on the product or sit upon it.  - If the product collapses or is dropped, you may be injured. Children mus\
t pay particular attention.
Do not leave the power or signal cable unattended on the pathway. - The passerby can falter, which can cause electrical shock, fire, product\
 breakdown or injury.
Install the product in a neat and dry place. - Dust or moisture can cause electrical shock, fire or product damage. 
If you can smell smoke or other odors or hear a strange sound unplug the\
 power cord and contact the
service center.  - If you continue to use without taking proper measures, electrical shock \
or fire can occur.
If you dropped the product or the case is broken, turn off the product a\
nd unplug the power cord.  - If you continue to use without taking proper measures, electrical shock \
or fire can occur. Contact the service center.
Do not drop an object on or apply impact to the product. Do not throw an\
y toys or objects on the product
screen.
- It can cause injury to human, problem to product and damage the display.\
  

Make sure the product ventilation hole is not blocked. Install the produ\
ct in a suitably wide place (more
than 10cm from the wall) - If you install the product too close to the wall, it may be deformed or \
fire can break out due to internal heat.
Do not block the ventilation hole of the product by a tablecloth or curt\
ain. - The product can be deformed or fire can break out due to overheating ins\
ide the product.
Install the product on a flat and stable place that has no risk of dropp\
ing the product. - If the product is dropped, you may be injured or the product may be brok\
en.
Install the product where no EMI occurs.
Keep the product away from direct sunlight. - The product can be damaged.
Warning
Caution
 
						

							
22
Safety Precautions

Electrical Power Related Precautions
Make sure to connect the power cable to the grounded current.- You may be electrocuted or injured.
Use the rated voltage only. - The product can be damaged, or you may be electrocuted.
In the presence of thunder and lightning, never touch the power cord and\
 signal cable because it can be
very dangerous. -  It can cause electric shock. 
Do not connect several extension cords, electrical appliances or electri\
cal heaters to a single outlet. 
Use a power bar with a grounding terminal designed for exclusive use wit\
h the computer. - A fire can break out due to overheating.
Do not touch the power plug with wet hands. Additionally, if the cord pi\
n is wet or covered with dust, dry
the power plug completely or wipe dust off. - You may be electrocuted due to excess moisture.
If you don’t intend to use the product for a long time, unplug the po\
wer cable from the product. - Covering dust can cause a fire, or insulation deterioration can cause el\
ectric leakage, electric shock or fire.
Fix the power cable completely. - If the power cable is not fixed completely, a fire can break out.
Hold the plug when pulling out the power cable. Do not bend the power co\
rd with excessive force or put
heavy objects on the power cord. - The power line can be damaged, which may cause electric shock or fire.
Do not insert a conductor (like a metal chopstick) into one end of the\
 power cable while the other end is
connected to the input terminal on the wall. Additionally, do not touch \
the power cable right after
plugging into the wall input terminal. - You may be electrocuted.
The power supply cord is used as the main disconnection device. Ensure t\
hat the socket-outlet is easily
accessible after installation.
Main power breaker is the power cord and this breaking device must be lo\
cated at a location where it is easy
to operate. 
Do not unplug the power cord while the product is in use.
- Electrical shock can damage the product.

Warning

Caution

Precautions in Moving the Product

Warning
Make sure to turn off the product.- You may be electrocuted or the product can be damaged.
Make sure to remove all cables before moving the product. - You may be electrocuted or the product can be damaged.
 
						

							
3
Safety Precautions

Caution

Precautions in Using the Product

Warning
Do not put or store inflammable substances near the product.- There is a danger of explosion or fire due to careless handling of the i\
nflammable substances.
When cleaning the brown tube surface, unplug the power cord and scrub wi\
th soft cloth to prevent
scratching. Do not clean with a wet cloth. - The water can sink into the product, which can cause electric shock or s\
erious malfunction.
Take a rest from time to time to protect your vision.
Keep the product clean at all times.
Take a comfortable and natural position when working with a product to r\
elax the muscles.
Take a regular break when working with a product for a long time.
Do not press strongly upon the panel with a hand or sharp object such as\
 nail, pencil or pen, or make
a scratch on it.
Keep the proper distance from the product. - Your vision may be impaired if you look at the product too closely.
Set the appropriate resolution and clock by referring to the User’s G\
uide. - Your vision can be impaired.
Use authorized detergent only when cleaning the product. (Do not use be\
nzene, thinner or alcohol.) - Product can be deformed.

Caution
Do not shock the product when moving it.- You may be electrocuted or the product can be damaged.
Do not dispose the product-packing box. Use it when you move.
Make the panel face forward and hold it with both hands to move. - If you drop the product, the damaged product can cause electric shock or\
 fire. Contact with the service center 
for repair.
Do not disassemble, repair or modify the product at your own discretion.\
- Fire or electric shock accident can occur.
- Contact the service center for check, calibration or repair.
When cleaning the brown tube surface, unplug the power cord and scrub wi\
th soft cloth to prevent
scratching. Do not clean with a wet cloth.
Keep the product away from water. - Fire or electric shock accident can occur.
The fluorescent lamp used in this product contains a small amount of mer\
cury. 
Do not dispose of this product with general household waste.
Disposal of this product must be carried out in accordance to the regula\
tions of your local authority.

On Disposal
 
						

							
4
Using the Remote Control

•Power On/Off Button

•AV Button•Input Select Button
(See next page)
•Sleep Button
When watching  AV/S-Video/RGB/HDMI
•Component1/ Component2The product will be automatically turned off
after a certain period of time.
Press this button repetitively to select an
appropriate time duration
• Menu Button•Exit Button
•Auto Button
Automatic adjustment function
(Operational for the analog signal only)
•Check Button
•Video Operation Button
Applicable for LG products only
•Volume          Button

•Mute button
Name of the Remote Control Buttons (A type)
There is not a function  which is supported
•PSM Button
- Automatically adjusts the image. Press this button repetitively to set
the intended screen. 
•UP and Down buttonsBring up and down direction  adjustment. 
•ARC button
To select the image
size of the screen.
 
						

							
5

If you press the button once,
the following Input Signal
Window will appear. Select
the signal type you want
using the          button.
•Input Select Button

Input

AV          Component1
Component2            RGB           
HDMI/DVI
•AV Button
Using the Remote Control
Each time you press the Input
button it will change to 
1. Take out the battery cap.
2. Insert the batteries with correct polarity (+/-).
3. Close the battery cap.• Dispose of used batteries in the recycle bin to preventenvironmental pollution.

Inserting batteries into remote control.
 
						

							
6
Using the Remote Control

Name of the Remote Control Buttons( B type)

123
456
78
0
9
*
•AV Button
•Sleep ButtonWhen watching AV/S-Video/RGB/HDMI/Component1/ Component2The product will be automatically turned
off after a certain period of time.
Press this button repetitively to
select an appropriate time duration
•PSM Button
- Automatically adjusts the image.
Press this button repetitively to set the intended screen. 
• Menu Button
•Check Button
•Volume          Button
•Mute button
There is not a function 
which is supported
•UP and Down buttonsBring up and down direction adjustment.  •
ARC button
To select the image size of the
screen.
•Auto Button
Automatic adjustment function
(Operational for the analog signal
only)
•Exit Button
There is not a function 
which is supported
There is not a function 
which is supported
There is not a function  which is supported
•Power On/Off Button•Input Select Button
(See next page)
 
						

							
7
Using the Remote Control

Input

AV          Component1
Component2            RGB           
HDMI/DVI
•AV Button
Each time you press the Input
button it will change to 

123
456
78
0
9
*

If you press the button once,
the following Input Signal
Window will appear. Select
the signal type you want
using the          button.
•Input Select Button

1. Take out the battery cap.
2. Insert the batteries with correct polarity (+/-).
3. Close the battery cap.• Dispose of used batteries in the recycle bin to preventenvironmental pollution.

Inserting batteries into remote control.
 
						

							
8
To arrange cables in order
1.Disassemble the stand cover.The cover may be easily disassembled by pressing
up on the base as shown in the figure.
2.After connecting the cables, correctly position the stand cover into the\
 holes on the
stand. If securely connected, you will hear the latch click into place.
Stand cover

* Applicable only for models that support the stand
 
						

							
9
Connecting the Speakers

Use the screws to secure the speakers on the rear side of the product as\
 shown
in the below figure.

* Applicable only for models that support the speakers When the speaker is installed.