LG M3201c Users Guide

							
10
Name and Function of the Parts
Rear View

Power Connector : Connect the power cord
Wired Remote Control Port
RS-232C Serial Ports
RGB, HDMI/DVI Ports
PC Sound Jack 
: Connect the audio cable to the *LINE OUT jack of the PC sound card.
AV Ports

OUTINVIDEOL-AUDIO-R
VIDEOYP BP RRGB INRGB OUTHDMI/DVI INL-AUDIO-RCOMPONENT IN
AV
OUT AV INREMOTECONTROL INRS-232C(CONTROL&
SERVICE)1
2AUDIO(RGB/DVI)S-VIDEO

*LINE OUT
A terminal used to connect to the speaker including a built-in amplifier\
 (Amp). Make sure that 
the connecting terminal of the PC sound card is checked before connectin\
g. If the Audio Out of 
PC sound card has only Speaker Out, reduce the PC volume. 
If the Audio Out of the PC sound card supports both Speaker Out and Line\
 Out, convert to Line Out using
the card jumper of the program (Refer to the Sound Card Manual).

OUT
IN
VIDEOL-AUDIO-R
VIDEOYP BP RRGB IN
RGB OUT
HDMI/DVI IN
L-AUDIO-RCOMPONENT IN
AV
OUT AV INREMOTECONTROL INRS-232C(CONTROL&
SERVICE)
1
2
AUDIO(RGB/DVI)
S-VIDEO

* The product image in the user ’s guide could be different from the actual image.

Power connector and image may differ according to model.
 
						

							
11

RGB IN
HDMI/DVI IN
First of all, see if the computer, product and the peripherals are turne\
d off. 
Then, connect the signal input cable.When connecting with the D-Sub signal input cable.
When connecting with the HDMI to DVI signal input cable (not included)\
.
MAC
Macintosh Adapter (not included)
Use the standard Macintosh adapter since an incompatible
adapter is available in the market. (Different signaling system)
OUT
INVIDEOL-AUDIO-R
VIDEOYP BP RRGB INRGB OUT
HDMI/DVI INL-AUDIO-RCOMPONENT IN
AV
OUT AV INREMOTECONTROL INRS-232C(CONTROL&
SERVICE)1
2AUDIO(RGB/DVI)S-VIDEO
Rear side of the product.
Connecting to External Devices
Connect the power cord.
BA
B
A
PC
When Connecting to your PC
PC/MAC
PC
Rear side of the product.
Rear side of the product.
AUDIO(RGB/DVI)
PCRear side of the product.
Connect the Audio cable.
(not included)
 
						

							
12
Select an input signal.
Press the INPUT button on the remote control to select the input signal.\
 
Or, press the INPUT button at the front side of the product.

INPUT SET

•How to connect to two computers.
Connect the signal cables (HDMI to DVIand D-Sub) to each computer.
Press the INPUT button in a remote control to select the computer to use\
.
•   Directly connect to a grounded power outlet on the wall or a power bar w\
ith a ground 
wire.
Note

Turn on power by pressing the power button on the product.
Turn on the PC. 

Power button

InputInputINPUTAUTO/SET
When connecting with a D-Sub signal input cable.•  Select  RGB: 15-pin D-Subanalog signal.
When connecting with a HDMI to DVI signal input cable.• Select  HDMI/DVI  : HDMI to DVIDigital signal.BA
Connecting to External Devices
2
1
 
						

							
13
Use this function when displaying ANALOG RGB inputs of a PC to the other\
 product.

RGB IN

RGB OUT

RGB IN

RGB OUT

RGB IN

RGB OUT

RGB IN

RGB OUT

Product 1
• To use different products connected to each other
Connect one end of the signal input cable(15-pin D-Sub Signal Cable) t\
o the  RGB OUT
connector of  product 1and connect the other end to the RGB IN connector of other 
products.
Watching RGB Outputs
PC
Product 2 Product 3 Product 4
15-pin D-Sub Signal Cable
Connecting to External Devices

• When multi-connecting in/out cascade format, cables to be less damaged \
are recommended.
We recommend that you should use cable distributor.Note
PC
 
						

							
14
Connecting to External Devices
When connecting with an BNC cable.• Select   AV. 
When connecting with an S-Video cable.
•  Select   AV. 

BA

L-AUDIO-R
VIDEO
AV
OUT AV INS-VIDEO

When connecting with a S-Video cable.
•
 Connect to the S-Video input terminal to
watch high image quality movies.
Connect the video cable as shown in the below figure and then connect th\
e power
cord (See page 11).
BWhen connecting with a BNC cable.
•
 Connect the input terminal with a
proper color match.
A
BNC Cable
(not included)
Product
VCR/DVD Receiver

Input

When watching VCR / DVD
Select an input signal.
Press the INPUT button on the remote control to select the input signal.\
 
Or, press the INPUT button at the front side of the product.

INPUT SET

INPUTAUTO/SET

•  In case the BNC cable is connected simultaneously as S-Video cable is c\
onnected, S-Video cable is
first.Note
Audio Cable
(not included)

L-AUDIO-R
VIDEO
AV
OUT AV INS-VIDEO

S-Video Cable
(not included)
Audio Cable
(not included)
Product
VCR/DVD Receiver
R
W
 
						

							
15
• Select  Component 1 
• Select  Component 2 
B
A

VIDEO
YP BP RL-AUDIO-RCOMPONENT IN
1
2

Connect the video/audio cable as shown in the below figure and then, con\
nect the
power cord (See page 11).

•  Connect the input terminal with a proper color match. 
BNC Cable
(not included)
Product
HDTV Receiver

Input
Input

When watching HDTV/DVD(480p/576p/720p/1080i/480i/576i)
Select an input signal.
Press the INPUT button on the remote control to select the input signal.\
 
Or, press the INPUT button at the front side of the product.

INPUT SET

INPUTAUTO/SET

Audio Cable
(not included)

VIDEO
YP BP RL-AUDIO-RCOMPONENT IN
1
2

Product
HDTV Receiver

B
A
BNC Cable
(not included) Audio Cable
(not included)
Connecting to External Devices
 
						

							
16

RGB IN
RGB OUT
HDMI/DVI IN
AUDIO(RGB/DVI)RGB IN
RGB OUT
HDMI/DVI IN
AUDIO(RGB/DVI)
Connect the video/audio cable as shown in the below figure and then conn\
ect the
power cord (See page 11).
RCA-PC 
Audio Cable
Product
VCR/DVD/Set-top Box
HDMI to DVI
Signal Cable
(not included)
InputInput
When watchingHDMI/DVI/RGB from the VCR/DVD/Set-top Box
(480p/576p/720p/1080i)
VCR/DVD/Set-top Box
Product
Select an input signal.
Press the INPUT button on the remote control to select the input signal.\
 
Or, press the INPUT button at the front side of the product.
INPUT SET
INPUTAUTO/SET
HDMI  Signal Cable
(not included)
Connecting to External Devices 
RGB IN
RGB OUT
HDMI/DVI IN
AUDIO(RGB/DVI)
VCR/DVD/Set-top Box
Product
D-Sub 
Signal
Cable RCA-PC 
Audio Cable
When connecting with a 
HDMI to DVI signal input cable.
When connecting with a 
HDMI signal input cable.•  Select  HDMI/DVI 
When connecting with a D-Sub signal input cable.• Select  RGB
BA
A
B
 
						

							
17
• When you set the input signal of the main screen as  AV (CVBS), you can transmit the signal that 
youre watching to the AV output terminal.

L-AUDIO-R
VIDEO
AV
OUT AV INS-VIDEO

Video/TV
WatchingAV Outputs
BNC Cable
(not included) Audio Cable
(not included)
BNC Cable
(not included) Audio Cable
(not included)
Video/TVProduct
Connecting to External Devices

•
 When multi-connecting in/out cascade format, cables to be less damaged \
are recommended.
We recommend that you should use cable distributor.Note
 
						

							
18
• Set it up close to the wall so the product doesnt fall over when it is \
pushed backwards.
The instructions shown below is a safer way to set up the product, which\
 is to fix it on the wall so the product doesnt 
fall over when it is pulled in the forward direction. It will prevent th\
e product from falling forward and hurting people. It 
will also prevent the product from damage caused by fall. Please make su\
re that children dont climb on or hang from the product.
* This feature is not available for all models.

2
1

3
1. Use the braket and the bolt to fix the product to the wall as shown i\
n the picture.
2. Secure the bracket with the bolt(not provided as parts of the produc\
t, must purchase separately) on the wall.
3. Use a sturdy rope (not provided as parts of the product, must purcha\
se separately) to tie the product. It is
safer to tie the rope so it becomes horizontal between the wall and the \
product.

• When moving the product to anoher place undo the ropes first.
• Use a product holder or a cabinet that is big and strong enough for\
 the size and weight of the product.
• To use the product safely make sure that the height of the braket t\
hat is mounted on the wall is same as that of the product.Note
Attaching the product to a wall
 
						

							
19

Selecting and Adjusting the Screen
Name of the Buttons in the Screen Adjustment Unit

• Press this button to turn on the power. Press this button again toturn it off.
• This Indicator lights up green when the display operates normally(on mode). If the display is in sleep (Energy Saving) mode, this indicato\
r
color changes to amber.Power Button

• Adjust the volume. • Adjust the up and down.

• Use this button to show/hide the OSD (On Screen Display) menuscreen.MENU Button

• Use thisbutton to select an icon or adjust the setting in the OSD screen.OSD Select /
Adjust Button

Power Indicator