LG M3201c Users Guide

							
20

• The unit that receives the signal from the remote control.
Name of the Buttons in the Screen Adjustment Unit

[For PC Analog signal]AUTO/SET Button

AVComposite Video, Separate Video
Component 1 HDTV, DVD
Component 2 HDTV, DVD
RGB 15-pin D-Sub analog signal
HDMI/DVI             Digital signal
• Select the input signal 
INPUT Button

Input

INPUTAUTO/SET

Auto in progress
For opimal display change
resolution to 1360 X 768

IR Receiver
Selecting and Adjusting the Screen

[When XGA Mode is active and
1360 X768 is selected]
 
						

							
21
Selecting and Adjusting the Screen
OSD Menu 

Icon Function Description
PICTURESOUND

Adjusts the screen video.
Adjusts the audio function.
Adjusts screen brightness, contrast and color  that you prefer.

NoteOSD(On Screen Display)
The OSD function enables you to adjust the screen status conveniently si\
nce it provides
graphical presentation. 
SPECIALAdjusts the screen status according to the circumstances.
SCREEN
TIMERAdjusts the timer function.
 
						

							
22
How to adjust the OSD (On Screen Display) screen

How to adjust the screen automatically

You need to adjust the screen display when connecting the product to
a new computer or changing the mode. Refer to the following section to
set an optimal product screen.
Press the AUTO/SET button (AUTO buttonin a remote Control) in the
PC analog signal. Then, an optimal screen status will be selected that
fits into the current mode.
If adjustment is not satisfactory, you need to adjust screen position,
clock and phase in the OSD menu. Press the 
MENUButton, then the main menu of the OSD appears.
To access a control, use the            Buttons. 
When the icon you want becomes highlighted, press the  SET Button.
Use the                         Buttons to adjust the item to the desire\
d level.
Accept the changes by pressing the  SETButton.
Exit the OSD by pressing the  EXITButton.

1
2
3
4
5
6
Selecting and Adjusting the Screen

[When XGA Mode is active and
1360 X768 is selected]

• Use the remote control to adjust the OSD screen.

Pops up
the menu screen Move where
you want to adjust
Move where
you want to adjust Select a
menu icon
Select a
menu icon Adjust the status
Save
adjustment Exit from the
menu screen.

(A Type)
(B Type)
 
						

							
23
Selecting and Adjusting the Screen
Red / Green / BlueSet your own color levels.
Adjusting Screen Color

PSM
CSM
Advanced
Reset

Contrast : Adjust the difference between the light and dark levels in the picture\
.
Brightness : To adjust the brightness of the screen.
Colour : To adjust the color to desired level.
Sharpness : To adjust the clearness of the screen.
Tint :To adjust the tint to desired level.

User
00
0
Red
Green
Blue

The
PSM function automatically adjusts the screen image quality 
depending on the AV usage environment.  •  Dynamic : Select this option to display with a sharp image. 
•  Standard : The most general and natural screen display status.
•  Mild : Select this option to display with a mild image.
•  User1,2 : Select this option to use the user-defined settings.

User1
10050
50
500
Contrast
Brightness
Colour
Sharpness
Tint

RG

Selecting a factory setting color set. 
•  Warm : Slightly reddish white. 
•  Normal : Slightly bluish white.
•  Cool : Slightly purplish white.
•  User : Select this option to use the user-defined settings.
PSM
CSM

NoteIf the  PSM  setting in the  PICTUREmenu is set to  Dynamic, Standard, Mild the
subsequent menus will be automatically set.
 
						

							
24
Adjusting Screen Color

PSM AutoManual
XD Contrast
XD Colour
XD NR
MPEG NR
CSM
Advanced
ResetOn
On
Off 0
• Auto : XD is automatically change to Auto.
•  Manual :  When selecting the Manual, you can adjust the  XD Contrast, XD Colour , XD NR , 
MPEG NR .
•  XD Contrast :  Optimizing the contrast automatically according to the 
brightness of the reflection.
•  XD Colour :  Adjusting the colors of the reflection automatically to 
reproduce as closely as possible to the natural colors.
•  XD NR :  Removing the noise up to the point where it does not damage the
original picture.
•  MPEG NR :  You can select  MPEG NRto reduce the picture noise which
may appear on the screen during watching the AV.
PSM
Cinema
Black level
CSM
Advanced
ResetOff
Low
• Cinema : (Function works in the following mode - AV, Component 480i/576i)
When you watch the movie, this function adjusts the set to the best pict\
ure 
appearance.
•  Black Level : (Function works in the following mode - AV(NTSC), HDMI/DVI
adjusts the contrast and the brightness of the screen using the 
black level of the screen.
Advanced
Return to the default settings  PSM, CSM , XD , Advanced at the factory.Reset
XDis LG Electronics unique picture improving technology to display a real \
 HD source through
an advanced digital signal processing algorithm.
Its not available to use this function in  RGB-PCor HDMI/DVI PC modes.
This menu is activated after selecting the  User1or User2  of PSM .XD
• Low :  The reflection of the screen gets brighter.
•  High :  The reflection of the screen gets darker.
•  Auto :  Realizing the black level of the screen and set it to High or Low      
automatically. (Europe an version only)
Selecting and Adjusting the Screen
 
						

							
25
Selecting and Adjusting the Screen
The best sound tone quality will be
selected automatically depending on the
video type that youre currently watching.SSM
Adjusting the audio function

NoteWhen connected to your computer and theSSMsetting in the audio menu is one of  Flat, Music ,
Movie or Sports , the available menus are  Balance, AVL and Surround MAX.
To adjust uneven sound volumes across all channels or signals automatica\
lly to the most
appropriate level. To use this feature, select On.
Use this function to balance sound from the left and right speakers.
You can adjust internal speaker status.
If you want to use your external hi-fi stereo system, turn off the inter\
nal speakers of the set.AVL
Balance
Speaker

SSM
AV L
Balance 0
Speaker

• Surround MAX  : Set the Surround MAX on. This function plays back the mono or stereo sound input 
with the dynamic surround effects. It will provide rich and profound sou\
nd tone. If you set the 
Surround MAX on, user audio setting can not be adjusted.
•  Flat : The most commanding and natural audio.
•  Music : Select this option to enjoy the original sound when listening to the m\
usic.
•  Movie : Select this option to enjoy sublime sound.
•  Sports : Select this option to watch sports broadcasting.
•  User : Select this option to use the user-defined audio settings.

SSM
AV L
Balance 0
SpeakerSurround MAX
Flat
Music
Movie
Sports
User

User
120Hz
200Hz
500Hz

1.2KHz
3KHz
7.5KHz
12KHz
 
						

							
26
Clock
Adjusting the timer function

Clock
Off time
On time
Auto sleep

In the event of power interruption (disconnection or power failure), t\
he clock must be reset.
Once the on or off time is set, these functions operate daily at the pre\
set time.
Off time function overrides On time function if they are set to the same\
 time.
The set must be in standby mode for the On time to work.
When On time is operated, input screen is turnd on as it was turned off.\
Note
If the time is on the clock is incorrect, reset the clock manually.1) Press the  MENUbutton and then usebutton to select the  TIMEmenu.2) Press the button and then usebutton to select the  Clockmenu.3) Press the button and then usebutton to set the hour(00~23). 4) Press the button and then usebutton to set the minutes(00~59). 

Off / On timeThe off time automatically switches the set to standby at the pre-set ti\
me.
1) Press the  MENUbutton and then usebutton to select the  TIMEmenu. 2) Press the button and then usebutton to select  Off time or On time .3) Press the button and then usebutton to set the hour(01~23). 4) Press the button and then usebutton to set the minutes(00~59). 5) Press the button and then usebutton to select  Onor Off . 

Auto sleepIf Auto sleep is active and there is no input signal, the set switches to Stanby mode
automatically after 10 minutes. 1) Press the  MENUbutton and then use
button to select the Autosleepmenu. 2) Press the  button and then usebutton to select  Onor Off . 

Selecting and Adjusting the Screen
 
						

							
27
Selecting and Adjusting the Screen

Language
Child lock
ISM Method
Set ID
Tile Mode
Power Indicator
Logo lightDemo

Selecting the options 
LanguageTo choose the language in which the control names are displayed.
Use the        buttons to select  Onor Off . The Set can be set up so that it can only be used
with the remote control. This feature can prevent unauthorized viewing.
In order to lock the OSD screen adjustment, set the  Child locktab to the On position.
In order to unlock it, do the following :
•Push the  MENUbutton on the remote control and set  Child lockto the Off position.  
Child lock

You can assign a unique  Set IDNO (name assignment) to each product when several
products are connected for display. Specify the number (1~99) using th\
e          button
and exit. Use the assigned  Set IDto individually control each product using the Product
Control Program.
Set ID
Language
Child lock
ISM Method
Set ID
Tile Mode
Power Indicator
Logo light
1

Demo

ISM Method
Normal : If image sticking is never a problem, ISM is not necessary -set to Norma\
l.
White wash :  white wash removes permanent images from the screen.
(An excessive permanent image may be impossible to clear entirely with \
white wash.
Orbiter :  may help prevent ghost images. However, it is best not to allow any fixe\
d image to
remain on the screen. To avoid a permanent image on the screen, the scre\
en will move every 2
minutes.
Inversion :  This is function to invert the panel color of the screen. The panel colo\
r is
automatically inverted every 30 minutes.
A frozen of still picture from a PC/Video game displayed on the screen f\
or prolonged periods will
result in a ghost image remaining even when you change the image. Avoid \
allowing a fixed
image to remain on the sets screen for a long period of time.
 
						

							
28
Selecting the options 
Tile mode
Tile mode and choose Tile alignment and set the ID of the current produc\
t to set
location.* Only after pressing the SET button the     adjustments made to the settings will be saved.

Language
Child lock
ISM Method
Set ID
Tile Mode
Power Indicator
Logo light Tile Mode
Tile ID
H-Size
V-Size
H-Position
V-Position
ResetOff000
To set
Demo

It is used to enlarge the screen and
also used with several products to
view screen.
• To use this function- Must be displayed with various other products.
- Must be in a function that can be connected to RS-232C or RGB Out

• 
Tile Mode

- Tile mode : row x column ( r = 1, 2, 3, 4   c = 1, 2, 3, 4)
-  4 x 4 available.
-  Configuration of an integration screen is also available as well as configuration of One by one Display.

ID 1ID 2
ID 3ID 4
- Tile mode (product 1 ~ 4) : r(2) x c(2) 
row
column
Selecting and Adjusting the Screen
 
						

							
29
Selecting and Adjusting the Screen

ID 1ID 2
row
column
- Tile mode (product 1 ~ 2) : r(2) x c(1)

Selecting the options 
column
row
- Tile mode (product 1 ~ 9) : r(3) x c(3)
ID 1ID 2ID 3
ID 4ID 5ID 6
ID 7ID 8ID 9

column
row
- Tile mode (product 1 ~16) : r(4) x c(4)

ID 1ID 5
ID 9
ID 13 ID 2
ID 6
ID10
ID 14 ID 3
ID 7
ID 11
ID 15 ID 4
ID 8
ID 12
ID 16