Home > LG > Telephone > LG G2 User Guide

LG G2 User Guide

    Download as PDF Print this page Share this page

    Have a look at the manual LG G2 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1069 LG manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							29
    Body-worn Operation
    This device was tested for typical body-worn operations with the back of the phone kept 1 cm (0.39 inches) from the user’s body and the back of the phone. To comply with FCC RF exposure requirements, a minimum separation distance of 1 cm (0.39 inches) must be maintained between the user's body and the back of the phone. Third-party belt-clips, holsters, and similar accessories containing metallic components may not be used. 
    Body-worn accessories that cannot maintain 1 cm (0.39 inches) separation distance between the user's body and the back of the phone, and have not been tested for typical body-worn operations may not comply with FCC RF exposure limits and should be avoided.
    FCC Part 15 Class B Compliance
    This device complies with part 15 of FCC rules and ICES-003 Class B digital apparatus requirements for Industry Canada.
    Operation is subject to the following two conditions:
    (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
    Notice: Open Source Software To obtain the corresponding source code under GPL, LGPL, MPL and other open source 
    licences, please visit http://opensource.lge.com/ 
    All referred licence terms, disclaimers and notices are available for download with the 
    source code.
    Regulatory and Safety Go to "System settings > About phone > Regulatory and Safety" to get regulatory 
    and safety information  
    						
    							30
    Important notice
    Please check to see whether any problems you encountered with your phone are described in this section before taking the phone in for service or calling a service representative.
    1. Phone memory 
    When there is less than 10% of space available in your phone memory, your phone cannot receive new messages. You need to check your phone memory and delete some data, such as applications or messages, to make more memory available.
    To uninstall applications:
    1  Ta p   >  > Apps tab >  Settings > General tab > Apps.
    2  Once all applications appear, scroll and select the application you want to uninstall.
    3  Ta p  Uninstall.
    2. Optimizing battery life
    Extend your battery's power by turning off features that you don't have to run constantly in the background. You can monitor how applications and system resources consume battery power.
    Extending your phone's battery life:
    •	Turn off radio communications when you are not using. If you are not using Wi-Fi, Bluetooth or GPS, turn them off.
    •	Reduce screen brightness and set a shorter screen timeout.
    •	Turn off automatic syncing for Gmail, Calendar, Contacts and other applications.
    •	Some applications you have downloaded may reduce battery power.
    •	While using downloaded applications, check the battery charge level.
    Please read this before you start using your phone!   
    						
    							31
    NOTE: If you accidently press the Power/Lock Key while the device is in your 
    pocket, the screen will turn off automatically in order to save battery power.
    To check the battery power level:
    •	Ta p   >  > Apps tab >  Settings > General tab > About phone > Battery.
    The battery status (charging or discharging) and battery level (percentage charged) is displayed at the top of the screen.
    To monitor and control how battery power is being used:
    •	Ta p   >  > Apps tab >  Settings > General tab > About phone > Battery > Battery use.
    Battery usage time is displayed on the screen. It tells you how long it has been since you last connected your phone to a power source or, if currently connected, how long the phone was last running on battery power. The screen shows the applications or services using battery power, listed in order from the greatest to smallest amount used.
    3.  Before installing an open source application and OS
     WARNING
    If you install and use an OS other than the one provided by the manufacturer 
    it may cause your phone to malfunction. In addition, your phone will no \
    longer 
    be covered by the warranty.
      WARNING
    To protect your phone and personal data, only download applications from 
    trusted sources, such as Play Store™. If there are improperly installed 
    applications on your phone, the phone may not work normally or a serious\
     
    error may occur. You must uninstall those applications and all associated data 
    and settings from the phone.   
    						
    							32
    4. Using an unlock pattern
    Set an unlock pattern to secure your phone. Tap  >  > Apps tab >  Settings > Display tab > Lock screen > Select screen lock > Pattern. This opens a screen that will guide you through how to draw a screen unlock pattern. You have to create a Backup PIN as a safety measure in case you forget your unlock pattern.
    Caution: Create a Google account before setting an unlock pattern and remember the Backup PIN you created when creating your pattern lock.
     WARNING
    Precautions to take when using pattern lock.
    It is very important to remember the unlock pattern you set. You will not be 
    able to access your phone if you use an incorrect pattern 5 times. You have 5 
    opportunities to enter your unlock pattern, PIN or password. If you have used 
    all 5 opportunities, you can try again after 30 seconds.
    When you can’t recall your unlock Pattern, PIN or Password:
    < If you have forgotten your pattern >
    If you logged in to your Google account on the phone but failed to enter the corre\
    ct pattern 5 times, tap the Forgot pattern? button at the bottom of the screen. You are then required to log in with your Google Account or you have to enter the Backup PIN which you entered when creating your Pattern Lock.
    If you have not created a Google account on the phone or you forgot Backup PIN, you have to perform a hard reset.
    < If you have forgotten your PIN or Password > 
    If you forget your PIN or Password, you will need to perform a hard reset.
    Caution: If you perform a hard reset, all user applications and user data will be deleted.
    Important notice   
    						
    							33
    NOTE: If you have not logged into your Google Account and have forgotten 
    your Unlock Pattern, you will need to enter your Backup PIN.
    5.  Using the Hard Reset (Factory Reset)
    If your phone does not restore to its original condition, use a Hard Reset (Factory Reset) 
    to initialize it.
    1  Turn the power off.
    2  Press and hold the Power/Lock key + Volume Down key on the back of the phone.
    3  Release the Power/Lock Key only when the LG logo is displayed, then immediately press and hold the Power/Lock Key again.
    4  Release all keys when the Factory hard reset screen is displayed.
    5  Press the Power/Lock Key to continue or either of the Volume Keys to cancel.
    6  Press the Power/Lock Key once more to confirm or either of the Volume Keys to cancel.
     WARNING
    If you perform a Hard Reset, all user applications, user data and DRM licenses 
    will be deleted. Please remember to backup any important data before 
    performing a Hard Reset.
    6.   Opening and switching applications
    Multi-tasking is easy with Android, you can keep more than one application running at the same time. There is no need to quit an application before opening another one. Use and switch between several open applications. Android manages each application, stopping and starting them as needed to ensure that idle applications don't consume resources unnecessarily.   
    						
    							34
    1  Touch and hold the Home Key . A list of recently used applications will be displayed.
    2  Tap the application you want to access. This does not stop the previous app running in the background on the phone. Make sure to tap Back Key  to exit an app after using it.•	To stop applications, tap Task Manager from the recent apps list, then tap Stop or Stop all.
    •	To remove an app from the recent apps list, swipe the app preview to the left or right. To clear all apps, tap Clear all. 
    7.  Transferring music, photos and videos using Media 
    sync (MTP)
    1  Ta p   >  > Apps tab >  Settings > General tab > Storage to check out the storage media. 
    2  Connect the phone to your PC using the USB cable.
    3  Select USB connection mode  will appear on your phone screen, Select the Media sync (MTP) option.
    4  Open the memory folder on your PC. You can view the mass storage content on your PC and transfer the files from PC to Device memory folder or vice versa.
    5  After transfering files ,slide down the status bar and tap USB connected and select Charge phone from USB connection type list.
    8.  Hold your phone upright
    Hold your cell phone vertically, as you would a regular phone. Your phone has an internal antenna. Be careful not to scratch or damage the back of the phone, as this may affect performance.
    When making/receiving calls or sending/receiving data, avoid holding the lower part of the phone where the antenna is located. Doing so may affect call quality.
    Important notice   
    						
    							35
    9.  When the screen freezes
    If the screen freezes or the phone does not respond when you try to operate it:
    Press and hold the Power/Lock key for 10 seconds to turn your phone off. If it still does not work, please contact the service center.
    10.   Do not connect your phone when you power on/off 
    your PC
    Make sure to disconnect your phone from the PC when powering your PC on \
    or off as it might result in PC errors.
    11. Hardware key control mode
    If your phone display is damaged or broken, you can answer an incoming call, end a call, or turn off an alarm using the hardware keys.
    1  Turn your phone off.
    2  Press and hold the Power/Lock Key and the Volume Keys at the same time for more than 6 seconds to enter the Hardware key control mode.
    3  Press the Volume Keys to scroll to the desired option, then press the Power/Lock Key to confirm.•	Answer a call: Press the Volume Keys at the same time.
    •	End a call: Press the Power/Lock Key during a call.
    •	Stop an alarm: When an alarm rings, press and hold the Volume Up Key or Volume Down Key to stop the alarm.
    NOTE: If you use your phone with a broken display glass, your phone can 
    break even more or you can be injured. Make sure to visit the LG authorized 
    service center to get your phone repaired.   
    						
    							36
    Phone overview
    Back Key 
    •	Return to the previous screen. Exit an app after using it.
    Front Camera Lens
    Home Key 
    •	Return to the Home screen from any screen.
    Proximity/Ambient Light Sensor
    Earpiece
    Touch Screen
    Menu Key
    •	Check what options are available.
    NOTE: Proximity sensor When receiving and making calls, the proximity sensor automatically turns the backlight off 
    and locks the touch screen by sensing when the phone is near your ear. This extends battery 
    life and prevents you from unintentionally activating the touch screen during calls.
    WARNINGPlacing a heavy object on the phone or sitting on it can damage the LCD \
    and touch screen 
    functions. Do not cover the LCD proximity sensor with protective film. This could cause the 
    sensor to malfunction.
    Getting to know your phone  
    						
    							37
     WARNING•  This part encloses the battery compartment. Please do not open the back cover.•  Be careful not to damage the NFC touch point on the phone, which is part of the NFC antenna.
    Volume Keys
    •	On the home screen: Controls ringer volume.
    •	During a call: Control your earpiece volume.
    •	When playing a track: Controls volume continuously.
    Headset Jack
    Eject Button ApertureSIM Card Tray
    Main MicrophoneSpeaker
    Charger/USB port
    Power/Lock Key 
    •	Switch your phone on/off by pressing and holding this key
    •	Short press to lock/unlock the screen
    NFC Touch Point
    Camera Lens
    Flash
    Sub MicrophoneInfrared LED  
    						
    							38
    Installing the micro-USIM card
    Before you start exploring your new phone, you may choose to insert the micro-USIM card.
    The eject button is a small round aperture just above the tray door. To install a new micro-USIM card:
    1  Insert the micro-USIM ejection tool that comes with the phone (or a thin pin) into the eject button aperture, and push gently but firmly until the tray pops out.
    2  Remove the tray and place the micro-USIM card inside it, with the contacts out and the angled corner to the right. There is only one possible way to fit the card snugly into the tray.
    3  Carefully reposition the tray in the slot and push it gently back into the phone.
    NOTE: Make sure the gold contact area on the card is facing downwards.
    Eject button aperture
    Getting to know your phone  
    						
    All LG manuals Comments (0)

    Related Manuals for LG G2 User Guide