LG Flatron M2362dp Owners Manual

							71
PICTURE  CONTROL
You can calibrate the screen for each Picture Mode or set the video value according to the special video 
screen.
You can set the video value differently for each input.
To reset to the factory default screen after making adjustments to each video mode, execute the “Picture 
Reset” function for each Picture Mode.
PICTURE IMPROVEMENT TECHNOLOGY
MoveMoveOKOKPICTUREPICTURE
     ▲ • Brightness  50  • Sharpness  70  • Colour  50  • Tint   0  • Colour Temperature 0  • Advanced Control • Picture ResetScreen
     ▲ • Brightness  50  • Sharpness  70  • Colour  50  • Tint   0  • Colour Temperature 0  • Advanced Control • Picture ResetScreen
  • Advanced Control             ꔉ • Advanced Control             ꔉ
➩
• Press the MENU or EXIT button to close the menu window.
• Press the BACK  button to move to the previous menu screen.
◄  High  ►
Off
Off
Off
Off
Off
Dynamic Contrast
Dynamic Colour
Noise Reduction
Gamma
Black Level
Film Mode
Close
1
2
3
4
MENU
Select Advanced Control.
Select your desired Source.
Select Dynamic Contrast, Dynamic Colour, Noise Reduction, Gamma, Black Level 
or Film Mode. (Refer to p. 73 to 74)
Select PICTURE.
 
						

							72
PICTURE CONTROL
PICTURE  CONTROL
By segmenting categories, Expert 1 and Expert 2 provide more categories which users can set as they 
see fit, offering the optimal picture quality for users.
This may also be used to help a professional optimize the TV performance using specific videos.
EXPERT PICTURE CONTROL
MoveOKPICTURE
Aspect Ratio  : 16:9
Picture Wizard
ꕊ Energy Saving   : Off
Picture Mode   : Standard
  • Backlight    70
  • Contrast  90
  • Brightness  50
  • H Sharpness  70
▼
 Picture Mode   : ꕋ Expert 1                         ꔉ➩
MoveOKPICTURE
      ▲ • Contrast  90  • Brightness  50  • H Sharpness  50  • V Sharpness  49   • Colour   50 • Tint   0  • Advanced Control • Picture Reset▼
  • Expert Control                   ꔉ
◄    Medium   ►
Off
Off
Off
High
HD
Off
Off
Warm
Dynamic Contrast
Nosie Reduction
Gamma
Black Level
Film Mode
Colour Standard
Expert Pattern
Colour Filter
Colour Temperature
Close
1
2
3
4
5
6
MENU
Select Picture Mode.
Select Expert Control.
Select your desired Source.
Make appropriate adjustments.
Select  ꕋ Expert 1 or ꕋ Expert 2.
Select PICTURE.
• Press the MENU or EXIT button to close the menu window.
• Press the BACK  button to move to the previous menu screen.
VividStandardCinemaSportGameꕋ Expert 1ꕋ Expert 2
ꕋ Expert 1  ꔉ
 
						

							73
PICTURE  CONTROL
Dynamic Contrast
(Off/Low/High)
 ■Adjusts the contrast to keep it at the best level according to the brightness 
of the screen. The picture is improved by making bright parts brighter and 
dark parts darker.
Dynamic Colour
(Off/Low/High )
 ■Adjusts  screen  colours  so  that  they  look  livelier,  richer  and  clearer.  This 
feature enhances hue, saturation and luminance so that red, blue, green 
and white look more vivid.
Noise Reduction
(Off/Low/Medium/High) ■Reduces screen noise without compromising video quality.
Gamma
(Low/Medium/High)
 ■You can adjust brightness of dark area and middle gray level area of 
the picture.
  • Low: Make dark and middle gray level area of the picture brighter.
  • Medium: Express original picture levels.
  • High: Make dark and middle gray level area of the picture darker.
Black Level
(Low/High/Auto)
• Low: The picture of the screen gets darker.
• High: The picture of the screen gets brighter.
• Auto: Realizing the black level of the screen and set it to High or Low 
automatically.
 ■Set black level of the screen to proper level.
 ■This function enables to select  'Low' or 'High' in the following mode: 
AV(NTSC-M), HDMI or Component. Otherwise, 'Black level' is set to 
'Auto'.
Film Mode
(On/Off)
 ■You can watch a cinema-like video by eliminating judder effect.
 ■Use this function when you watch movies.
Colour Standard
(SD/HD)
 ■Converts the colour of a different video to HD colour. This function is 
set for SD video (BT-601) and HD video (BT-709) colour format.
 
						

							74
PICTURE CONTROL
PICTURE  CONTROL
Expert Pattern
(Off/Expert 1/Expert 2)
 ■This is the pattern necessary for expert adjustment.
 ■This function is enabled in "Picture Mode - Expert" when you watch DTV.
Colour Filter
(Off/Red/Green/Blue)
 ■This is the function to filter the specific colours of the video.
    You can use the RGB filter to set colour saturation and hue accurately.
Colour Temperature
 (Medium/Warm/Cool)
 ■This  is  the  function  to  adjust  the  overall  colour  of  the  screen  to  the 
feeling you want.
a. • Method: 2 Points
    • Pattern: Inner, Outer
    • Red/Green/Blue Contrast, Red/Green/Blue Brightness :
      The adjustment range is -50 to +50.
b. • Method: 10 point IRE
    • Pattern: Inner / Outer
    • IRE (Institute of Radio Engineers) is the unit to display the size of 
      the video signal and can be set among 10, 20, 30 to 100. You can 
adjust Red, Green or Blue according to each setting.
    • Red/Green/Blue: The adjustment range is -50 to +50.
Colour Management
System
 ■As  the  tool  used  by  the  experts  to  make  adjustments  by  using  the 
test  patterns,  this  does  not  affect  other  colours  but  can  be  used  to 
selectively  adjust  the  6  colour  areas  (Red/Green/Blue/Cyan/
Magenta/Yellow).
Colour  difference  may  not  be  distinctive  even  when  you  make  the 
adjustments for the general video.
 ■Adjusts Red/Green/Blue/Yellow/Cyan/Magenta.
• Red/Green/Blue/Yellow/Cyan/Magenta  Colour:  The  adjustment 
range is -30 to +30.
• Red/Green/Blue/Yellow/Cyan/Magenta Tint: The adjustment range 
is -30 to +30.
 ■This feature is disable in RGB-PC and HDMI (PC) mode.
 
						

							75
PICTURE  CONTROL
Settings of the selected picture modes BACK  to the default factory settings.
PICTURE RESET
MoveMoveOKOKPICTUREPICTURE
     ▲ • Brightness  50  • Sharpness  70  • Colour  50  • Tint   0  • Colour Temperature 0  • Advanced Control • Picture ResetScreen
     ▲ • Brightness  50  • Sharpness  70  • Colour  60  • Tint   0  • Colour Temperature 0  • Advanced Control • Picture ResetScreen
  • Picture Reset                    ꔉ • Picture Reset            ꔉ
➩
NOYes
?All picture setting will be resetted.continue?
1
2
3
4
MENU
Select Picture Reset.
Select Yes or No.
Select PICTURE.
• Press the MENU or EXIT button to close the menu window.
• Press the BACK  button to move to the previous menu screen.
 
						

							76
PICTURE CONTROL
PICTURE  CONTROL
Selecting Resolution
To view a normal picture, match the resolution of RGB mode and selection of PC mode.
This function works in the following mode: RGB[PC] mode.


SCREEN SETUP FOR PC MODE
MoveOKPICTURE
     ▲ • Brightness  50  • Sharpness  70  • Colour  50  • Tint   0  • Colour Temperature 0  • Advanced Control • Picture ResetScreen  Screen                                                         ꔉ
➩
Resolution     ►
Auto Config.
Position
Size
Phase
Reset
1024 x 768
1280 x 768
1360 x 768
MovePrev.SCREEN
1
2
3
4
5
MENU
Select Screen.
Select Resolution.
Select the desired resolution.
Select PICTURE.
• Press the MENU or EXIT button to close the menu window.
• Press the BACK  button to move to the previous menu screen.
1280 x 960
1400 x 900
1600 x 900
Resolution     ►
Auto Config.
Position
Size
Phase
Reset
SCREENMovePrev.
 
						

							77
PICTURE  CONTROL
Auto Configure (RGB [PC] mode only)
Automatically  adjusts  picture  position  and  minimizes  image  instability. After  adjustment,  if  the  image  is 
still not correct, your set is functioning properly but needs further adjustment.
Auto configure
This function is for automatic adjustment of the screen position, clock, and phase The displayed image 
will be unstable for a few seconds while the auto configuration is in progress.
1. Using OSD
MoveOKPICTURE
     ▲ • Brightness  50  • Sharpness  70  • Colour  50  • Tint   0  • Colour Temperature 0  • Advanced Control • Picture ResetScreen  Screen                                                         ꔉ
➩
1
2
3
4
5
MENU
Select Screen.
Select Auto Config.
Select Yes.
Run Auto Config.
Select PICTURE.
• Press the MENU or EXIT button to close the menu window.
• Press the BACK  button to move to the previous menu screen.
Resolution 
Auto Config.     ►
Position
Size
Phase
Reset
SCREEN
To Set
YesNo
• If  the  position  of  the  image  is  still  not  correct,  try 
Auto adjustment again.
• If  picture  needs  to  be  adjusted  again  after  Auto 
adjustment in RGB (PC), you can adjust the Posi 
tion, Size or Phase.
MovePrev.
 
						

							78
PICTURE CONTROL
PICTURE  CONTROL
2. Using Auto Config. (Remocon)
This function is available for RGB signals only.






Press Auto Config.
Press Auto Config.



Press Auto Config.
Auto Config.
Auto Config.
Auto Config.
Auto in progress
Auto in progress
Auto in progress
For optimal display
change resolution 1600 x 900
Auto in progress
For optimal display
change resolution 1360 x 768
Auto in progress
For optimal display
change resolution 1920 x 1080
Auto in progress
 
						

							79
PICTURE  CONTROL
Adjustment for screen Position, Size, Phase
If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the 
picture phase manually.
This function works in the following mode: RGB[PC].
MoveOKPICTURE
     ▲ • Brightness  50  • Sharpness  70  • Colour  50  • Tint   0  • Colour Temperature 0  • Advanced Control • Picture ResetScreen  Screen                                                         ꔉ
➩
Resolution 
Auto Config. 
Position         ►
Size
Phase
Reset
SCREEN
1
2
3
4
5
MENU
Select Screen.
Select Position, Size or Phase.
Make appropriate adjustments.
Select PICTURE.
• Press the MENU or EXIT button to close the menu window.
• Press the BACK  button to move to the previous menu screen.
MovePrev.
 
						

							80
PICTURE CONTROL
PICTURE  CONTROL
Screen Reset
Returns Position, Size and Phase to the factory default settings.
This function works in the following mode: RGB[PC].
MoveOKPICTURE
     ▲ • Brightness  50  • Sharpness  70  • Colour  50  • Tint   0  • Colour Temperature 0  • Advanced Control • Picture ResetScreen  Screen                                                         ꔉ
➩
1
2
3
4
5
MENU
Select Screen.
Select Reset.
Select Yes.
Run Reset.
Select PICTURE.
• Press the MENU or EXIT button to close the menu window.
• Press the BACK  button to move to the previous menu screen.
Resolution 
Auto Config. 
Position
Size
Phase
Reset               ►
SCREEN
To Set
YesNo
MovePrev.