LG Flatron M208wa Users Guide

							40
Troubleshooting
• Install the product driver, which is provided with
the product, or download it from the web site.
(http://www.lge.com) 
•  See if the plug&play function is supported by
referring to the video card users guide. Did you install the driver?
Unknown Product message appears when the product is connected.
• Check if the power cord is properly connected to
the outlet.
• See if the power switch is turned on.
•  Adjust brightness and contrast again.
• If the product is in power saving mode, move the
mouse or press any key.
• In DVD Player or Settop Box, check the power
status of connected device.
• The signal from the PC (video card) is out of the
vertical or horizontal frequency range of the
product. Adjust the frequency range by referring to
the Specifications in this users guide.
* Maximum resolution
19 inch : RGB : 1440 X 900 @75 Hz 
DVI : 1440 X 900 @60 Hz 
20.1 inch : 1680 X 1050 @60 Hz 
22 inch : 1680 X1050 @60 Hz
•  The signal cable between PC and product is not
connected. Check the signal cable.
•  Press the INPUT button in the remote control to
check the input signal. Is the products power cord
connected?
Is the power indicator turning on?
Power is on, power indicator is blue
but the screen appears extremely
dark.
Does the power indicator look amber?
Does the Out of range message
appear?
Does the Check signal cable
message appear?
No image is displayed
Note* Vertical frequency: To enable the user to watch the product display, screen image should be changed tens of times
every second like a fluorescent lamp. The vertical frequency or refresh rate is the times of image display per second.
The unit is Hz.
* Horizontal frequency: The horizontal interval is the time to display one vertical line. When the 1 is divided by
horizontal interval, the number of horizontal lines displayed every second can be tabulated as the horizontal
frequency. The unit is kHz.
 
						

							41
• If you use a fixed image for a long time, the pixels
may be damaged quickly. Use the screen saver
function.  After-image appears when the
product is turned off.
After-image appears on the product.
Is the screen position wrong?
Do thin lines appear on the
background screen?
Horizontal noise appears or the
characters look blurred.
The screen image looks abnormal.
• Adjust the Position  menu  in OSD .
• See if the video card resolution and frequency
are supported by the product. If the frequency is
out of range, set to the recommended resolution
in the Control Panel – Display – Setting menu.
• Adjust the Clock menu  in OSD.
• Adjust the Phase menu  in OSD.
Troubleshooting
 
						

							42
• Set the colour resolution to more than 24 bits (true
colour)
Select Control Panel – Display – Settings 
– Colour Table menu in Windows.
• Check the connection status of the signal cable.
Or, re-insert the PC video card.
•  Several pixels (red, green, white or black colour)
may appear on the screen, which can be
attributable to the unique characteristics of the
LCD panel. It is not a malfunction of the LCD. Screen has poor colour resolution (16
colours).
Screen colour is unstable or mono-
colour.
Do black spots appear on the screen?
Screen colour is abnormal.
• Check if the audio cable is connected properly.
• Adjust the volume.
• Check if the sound is set properly.
• Adjust the volume. No sound?
Sound is too low.
The audio function does not work.
• See if you have selected the proper channel
mode.
• Use the automatic channel setup function.
• Check if the TV antenna is properly connected. The TV signal is not being received.
The TV function does not work.
Troubleshooting
 
						

							43
Specifications
The product specifications can change without prior notice for product improvement.
[19 inch]
Screen Type19 inches Wide (48.14 cm) TFT (Thin Film Transistor) 
LCD (Liquid Crystal Display) Panel
Visible diagonal size: 48.14 cm
Pixel Pitch0.285 mm
Max. Resolution RGB : 1440 X 900 @75 Hz 
DVI : 1440 X 900 @60 Hz 
Recommended Resolution1440 X 900 @60 Hz 
Horizontal Frequency28 - 83 kHz
Vertical Frequency56 - 75 Hz
Synchronization TypeSeparate Sync, Digital
S-Video, Composite video, TV, D-Sub Analog, DVI-D
SCART, PC Audio In, Headphone/Earphone, component
Rated Voltage AC 100-240V~ 50/60Hz 1.0A
Power ConsumptionOn Mode       :  50 W (Typ.)
Sleep Mode  ≤1 W
Off Mode       ≤1 W 
Tilt Range-3˚ ~ 10˚
Swivel350˚
Size (WxLxH)456.8 mm x 230.0 mm x 395.0 mm
Weight (excl. package)4.9 kg (10.8 Ibs)
Operational ConditionTemperature: 10˚C ~ 35˚C , Humidity: 20% ~ 80% 
Storage ConditionTemperature: -10˚C  ~ 60˚C , Humidity: 5% ~ 90% 
LCD Panel
Video Signal
Input Connector
Power
Tilt
Dimension/Weight
Environmental Conditions
 
						

							44
Specifications
The product specifications can change without prior notice for product improvement.
[20.1 inch]
Screen Type20.1 inches Wide (51.113 cm) TFT (Thin Film Transistor) 
LCD (Liquid Crystal Display) Panel
Visible diagonal size: 51.113 cm
Pixel Pitch0.258 mm
Max. Resolution RGB : 1680 X 1050 @60 Hz 
DVI : 1680 X 1050 @60 Hz
Recommended Resolution1680 X 1050 @60 Hz
Horizontal Frequency28 - 83 kHz
Vertical Frequency56 - 75 Hz
Synchronization TypeSeparate Sync, Digital
S-Video, Composite video, TV, D-Sub Analog, DVI-D
SCART, PC Audio In, Headphone/Earphone, component
Rated Voltage AC 100-240V~ 50/60Hz 1.0A
Power ConsumptionOn Mode       :  50 W  (Typ.)
Sleep Mode  ≤1 W
Off Mode       ≤1 W 
Tilt Range-3˚ ~ 10˚
Swivel350˚
Size (WxLxH)484.3 mm x 230.0 mm x 414.3 mm
Weight (excl. package)4.8 kg (10.58 Ibs)
Operational ConditionTemperature: 10˚C ~ 35˚C , Humidity: 20% ~ 80% 
Storage ConditionTemperature: -10˚C  ~ 60˚C , Humidity: 5% ~ 90% 
LCD Panel
Video Signal
Input Connector
Power
Tilt
Dimension/Weight
Environmental Conditions
 
						

							45
The product specifications can change without prior notice for product improvement.
[22 inch]
Specifications
Screen Type22 inches Wide (55.868 cm) TFT (Thin Film Transistor) 
LCD (Liquid Crystal Display) Panel
Visible diagonal size: 
55.868cm
Pixel Pitch0.282 mm
Max. Resolution RGB : 1680 X1050 @60 Hz 
DVI : 1680 X1050 @60 Hz 
Recommended Resolution1680 X1050 @60 Hz
Horizontal Frequency28 - 83 kHz
Vertical Frequency56 - 75 Hz
Synchronization TypeSeparate Sync, Digital
S-Video, Composite video, TV, D-Sub Analog, DVI-D
SCART, PC Audio In, Headphone/Earphone, component
Rated Voltage AC 100-240V~ 50/60Hz 1.0A
Power ConsumptionOn Mode       :  50 W  (Typ.)
Sleep Mode  ≤1 W
Off Mode       ≤1 W 
Tilt Range-3˚ ~ 10˚
Swivel350˚
Size (WxLxH)525.4 mm x 230.0 mm x 439.0 mm
Weight (excl. package)5.82 kg (13 Ibs)
Operational ConditionTemperature: 10˚C ~ 35˚C , Humidity: 20% ~ 80% 
Storage ConditionTemperature: -10˚C  ~ 60˚C , Humidity: 5% ~ 90% 
LCD Panel
Video Signal
Input Connector
Power
Tilt
Dimension/Weight
Environmental Conditions
 
						

							46
PC Mode – Preset Mode
Preset modeHorizontal
Frequency
(kHz)Vertical
Frequency
(Hz)Preset mode
Horizontal
Frequency
(kHz)Vertical
Frequency
(Hz)
1
2
3
4
5
6
7
8
9
10720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
1024 x 768
1024 x 768
1152 x 864
1280 x 1024
1280 x 102431.468
31.469
37.500
37.879
46.875
48.363
60.123
67.500
63.981
79.97670
60
75
60
75
60
75
75
60
7511
12
131440 x 900
1440 x 900
1440 x 90055.5
55.935
70.63560
60
75
Power Indicator
Mode
Product
On Mode
Sleep Mode
Off ModeBlue
Amber
Off
Specifications
DTV -Timming
Preset modeHorizontal
Frequency
(kHz)Vertical
Frequency
(Hz)
1
2
3
4
5
6
7
8
9720 x 480/60p
720 x 480/60p
720 x 576/50p
1280 x 720/50p
1280 x 720/60p
1280 x 720/60p
1920 x 1080/60i
1920 x 1080/60i
1920 x 1080/50i31.47
31.5
31.25
37.5
44.96
45
33.72
33.75
28.12560
60
50
50
60
60
60
60
50
[19 inch]
[20.1 inch] [22 inch]
Preset modeHorizontal
Frequency
(kHz)Vertical
Frequency
(Hz)Preset mode
Horizontal
Frequency
(kHz)Vertical
Frequency
(Hz)
1
2
3
4
5
6
7
8
9
10720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
1024 x 768
1024 x 768
1152 x 864
1280 x 1024
1280 x 102431.468
31.469
37.500
37.879
46.875
48.363
60.123
67.500
63.981
79.97670
60
75
60
75
60
75
75
60
7511
121680 x 1050
1680 x 105064.674
65.29060
60
* 1~13 : RGB mode     * 1~12 : DVI mode
 
						

							47
This product meets VESA-compliant mounting interface pad specifications.
1.Put the product on a piece of cloth or other soft surface with the front side facing downward.
Specifications
VESA wall mounting
2.Please pull and remove the stand base while pressing the
button on the stand body in the direction of the arrows.
3.Please put the stand body up.
 
						

							48
RGB(PC/DTV) IN DV I  I NANTENNA IN  AUDIO
(RGB/DVI) IN
H/P S-VIDEO
AV IN 2 AV 1(MONO)VIDEOAUD IOLR
AUD IO
COMPONENT INVIDEOYPbPrLR
VESA wall mounting
Connected to another
object (stand type and wall-
mounted type).
This product accepts a
VESA-compliant mounting
interfacepad.
(This has to be purchased
separately if required.)
For further information,
refer to the VESA Wall
Mounting Instruction Guide.
6.Install the VESA standard wall mounting.
Specifications
5.Fasten the screw on the backside of the product and the other one in the joint of the stand.
4.Please pull and remove the stand body while sliding and holding the latches down.