LG Flatron M208wa Users Guide

							20
Connecting to External Devices
When using the RCA cable.
• Connect the input terminal with a
proper colour match.When using theS-Video cable.• Connect to the S-Video input terminal to
watch high image quality movies.
S-VIDEO
AV IN 2(MONO)VIDEOAUDIOLR
VIDEO
OUTAUDIO
OUT
Rear side of the Product
RCA Cable
Connect the video/audio cable as shown in the figure below and then connect the power
cord (See page 19).
Connecting to VCR/DVD
VCR/DVD
B A
(Not included)
S-VIDEO
AV IN 2(MONO)VIDEOAUDIOLR
VIDEO
OUTAUDIO
OUT
RCA CableS-Video Cable
VCR/DVD
Rear side of the Product
(Not included)
(Not included)
1.
• In case the RCA cable is connected simultaneously as S-Video cable is connected, S-Video cable is first.Note
 
						

							21
Select an input signal.
Press the INPUT button on the remote control to select the input signal. 
Or, press the INPUT button at the top side of the product.
AV 1Rear side of the Product
VCR / DVD When using the SCART cable.
C
When connecting with a RCA cable.• Select AV2
When connecting with a S-Video cable.
• Select AV2
BA
SCART Cable 
Please, use shielded scart cable.
(Not Included)
2.
INPUT OK
INPUT OK
Connecting to External Devices
Input 
TV
AV1
AV2
Component
RGB
DVI
OKInput 
TV
AV1
AV2
Component
RGB
DVI
OK
Each time you press the Input button it will change to TV           AV1            AV2
Component          RGB         DVI
If nothing is inputted for several seconds the screen will automatically move to the selected menu. 
When connecting with a  SCART cable.
• Select AV1
C
 
						

							22
Connecting to External Devices
AUDIO
COMPONENT INVIDEOYPBPRLR
AUDIO
COMPONENT INVIDEOYPbPrLR
Rear side of the Product
Component Cable
Connect the video/audio cable as shown in the figure below and then connect the power
cord (See page 19).
Connecting to Set-top Box /DVD (480p/576p/720p/1080i/480i/576i)
Set-top Box /DVD
• Connect the input terminal with a proper colour match.
(Not included)
1.
Audio Cable
(Not included)
Select an input signal.
Press the INPUT button on the remote control to select the input signal. 
Or, press the INPUT button at the top side of the product.
• Select Component
2.
INPUT OK
INPUT OKInput 
TV
AV1
AV2
Component
RGB
DVI
OK
Each time you press the Input button it will change to TV           AV1            AV2
Component          RGB         DVI
If nothing is inputted for several seconds the screen will automatically move to the selected menu. 
 
						

							23
Connecting to External Devices
Connect the D-sub cable, RCA/PC cable as shown in the below figure 
and then connect the power cord. (see page 19)
RGB(PC/DTV) IN  AUDIO
(RGB/DVI) IN
[Rear side of the Product]
[Set-top Box/DVD] D-Sub cable
RCA-Stereocable
(not included)
When watching RGB/DVI from the DVD/Set-top Box
Select an input signal.
Press the INPUT button on the remote control to select the input signal. 
Or, press the INPUT button at the top side of the product.2. 1.
INPUT OK
INPUT OK
Input 
TV
AV1
AV2
Component
RGB
DVI
OKInput 
TV
AV1
AV2
Component
RGB
DVI
OK
Each time you press the Input button it will change to TV           AV1            AV2
Component          RGB         DVI
If nothing is inputted for several seconds the screen will automatically move to the selected menu. 
RGB(PC/DTV) IN DVI IN  AUDIO
(RGB/DVI) IN
[Rear side of the Product]
[Set-top Box/DVD]DVI cable
RCA-Stereocable
(not included)
B A
• Select RGBA• Select DVIB
 
						

							24
Rear Side of the Product
Antenna Cable
(Not included.)
Check if the antenna cable is connected at the rear side of the product
and then, connect the power cord.
When Watching TV
Select an input signal.
Press the INPUT button on the remote control to select the input signal. 
Or, press the INPUT button at the top side of the product.
• Select TV
RGB(PC/DTV) IN DV I  I NANTENNA IN  AUDIO
(RGB/DVI) IN
H/P S-VIDEO
AV IN 2 AV 1(MONO)VIDEOAUDIOLR
AUDIO
COMPONENT INVIDEOYPBPRLR
ANTENNA IN
1.
2.
INPUT OK
INPUT OK
Connecting to External Devices
Input 
TV
AV1
AV2
Component
RGB
DVI
OK
Each time you press the Input button it will change to TV           AV1            AV2
Component          RGB         DVI
If nothing is inputted for several seconds the screen will automatically move to the selected menu. 
 
						

							25
To arrange cables using cable management
RGB(PC/DTV) IN DV I  I NANTENNA IN  AUDIO
(RGB/DVI) IN
H/P S-VIDEO
AV IN 2 AV 1(MONO)VIDEOAUDIOLR
AUDIO
COMPONENT INVIDEOYPBPRLR
P
U
S
HC
ABL
EMANAGEMENT
ANTENNA IN
H/P S-VIDEO
AV IN 2 AV 1(MONO)VIDEOAUDIOLR
AUDIO
COMPONENT INVIDEOYPBPRLR
PUSHCA
BLE MANAGEMENT
cable
management 
1.
2.Arrange the cables in the center as shown in the following picture.
Fit the cable management  to the Holder Groove downwards.
Push down slightly.
Warning• Do not use the cable management as a handle for the Monitor.
• Do not press the cable management.
* When you want remove it.
PU
S
HC
ABLEMANAGEMENT
Push up slightly to remove it.
 
						

							26
Name of the Buttons in the Screen Adjustment Unit
Power Indicator
• Adjust the volume. •Use this button to control the channel for the TV signal.
•  Use this button to show/hide the OSD (On Screen Display) menu   
screen.MENU Button
•  Use thisbutton to select an icon or adjust the setting in the OSD screen.OSD Select/Adjust Button
Adjusting the Screen
INPUTMENUPRVOLOK
Volume 
30
•  This Indicator lights up blue when the display operates normally 
(On Mode). If the display is in Sleep (Energy Saving) Mode, this
indicator colour changes to amber.
•  Use this button to turn the product on and off.Power Button
RGB(PC/DTV) IN DV I  I NANTENNA IN  AUDIO
(RGB/DVI) INH/P S-VIDEO
AV IN 2 AV 1(MONO)VIDEOAUDIOLRAUDIO
COMPONENT INVIDEOYPBPRLR
 
						

							27
Adjusting the Screen
Name of the Buttons in the Screen Adjustment Unit
OK Button
TVTelevision
AV1SCART
AV2CVBS, S-Video
ComponentHDTV, DVD
RGBD-Sub analog signal
DVI DVI Digital signalINPUT Button
•The unit that receives the signal from the remote control.IR Receiver
•OK button is usually used in choosing the MENU.
When there is no MENU on the screen pushing the OK button will
give the information about the current input source.
Each time you press the Input button it will change to TV           AV1            AV2
Component          RGB         DVI
If nothing is inputted for several seconds the screen will automatically move to the selected menu. 
Input 
TV
AV1
AV2
Component
RGB
DVI
OK
 
						

							28
OSD(On Screen Display)
The OSD function enables you to adjust the screen status conveniently since it provides graphical
presentation. Note
OSD (On Screen Display) Menu 
Icon Function Description
Station
Picture
Sound
Time
Adjusting the time function. 
Adjusting the screen function.  Adjusting the sound function.Adjusting the picture function.
Set/Select the channel when using the TV
Special
Selecting the special function.
Screen
Adjusting the Screen
 
						

							29
Adjusting the Screen
OSD (On Screen Display) Screen Tracking Order
• Use the remote control to adjust the OSD screen.
Pop up the
menu screenMove where
you want to 
adjustSelect a menu icon
Adjust the status
Save
adjustmentExit from the
menu screen.
PR
PR
OKVOL
VOL
PR
PR
OKVOL
VOLMENUMENUOKOK
Press the MENUButton, then the main menu of the OSD will appear.
To access a control, use the            Buttons. 
When the icon you want becomes highlighted, press the OKButton.
Use the                         Buttons to adjust the item to the desired level.
Accept the changes by pressing the OKButton.
Exit the OSD by pressing the MENUButton 
repeatedly .
1
2
3
4
5
6
• Use the remote control to adjust the OSD screen.
Pop up the
menu screenMove where
you want to 
adjustSelect a menu icon
Adjust the status
Save
adjustmentExit from the
menu screen.
MENUMENU
PR
PR
OKVOL
VOL
PR
PR
OKVOL
VOLOKOK
A type
B type