LG Flatron M208wa Users Guide

							REVEAL
Press the button to reveal/conceal the hidden
information, such as solutions to riddles and
puzzles. Press this button again to remove the
information from the display.
INDEX
To display the main index.
MODE 
The mode will be switched in the Teletext mode.
UPDATE
Press the button to appear the TV programme. 
At the top of screen indicates that you are still in the
teletext mode. Before interrupting teletext, you may
select a page number. When the page has been
found, the information line appears briefly on your
screen. Press the button again to reappear teletext.
10
Remote Control - Using the Teletext function
PR
PR
OK MUTE
MENU
SLEEPARC
UPDATE
SIZE
HOLD
INDEX
SSM PSM
TEXT
TIME MIX
REVEALMODE
VOL
VOL
MX?i
I/II
Name and Function of the Parts
 
						

							11
Name of the Remote Control Buttons(B Type)
POWERTVINPUT
PR
PR
OK
MUTE
LIST
MENU
Q.VIEW
SLEEPARC/*
UPDATE
SIZE HOLD
INDEX
SSM PSM
TEXT
TIME MIX
REVEALMODE
VOL
VOL
MX?i
I/II
TV : TV button
POWER
INPUT
NOTE : In case of weak stereo sound signals, with stereo or Nicam stereo
transmission, select mono reception.
Each time you press the Input button it will
change to 
TV           AV1          AV2         Component       
RGB         DVI.
If nothing is inputted for several seconds the
screen will automatically move to the
selected menu. 
Number buttons
Able to directly select and change channel.
Name and Function of the Parts
MUTESwitches the sound on or off.
PSM (Picture Status Memory) Button
Press repeatedly to select Dynamic, Standard, Mild, Gameor User
picture mode.
SSM (Sound Status Memory) ButtonUse this button to select the sound tone. Press repeatedly to select Flat, Music, Movie, Sports, Usersound tone.
Input 
TV
AV1
AV2
Component
RGB
DVI
OK
 
						

							12
POWERTVINPUT
PR
PR
OK
MUTE
LIST
MENU
Q.VIEW
SLEEPARC/*
UPDATE
SIZE HOLD
INDEX
SSM PSM
TEXT
TIME MIX
REVEALMODE
VOL
VOL
MX?i
I/II
Name of the Remote Control Buttons
Name and Function of the Parts
I/II: Bilingual choice and sound mode selection
[TV]
To switch from Stereoto Monosound in case of stereo transmission,or from Nicam Stereoto Nicam Mono, in case of digital transmission.to switch from Nicam DualIto Nicam Dual IIor Nicam Dual I+IIin
case of Nicam Dual transmission.
to choose between DualI, Dual IIor Dual I+IIin case of bilingual
transmission : 
Dual I sends the primary broadcast language to the loudspeakers ;
Dual II sends the secondary broadcast language to the loudspeakers ;
Dual I+II sends a separate language to each loudspeakers.
[AV / Component]
In AV/Component mode, you can select output sound for the left and 
right loudspeakers. Repeatedly press the I/IIbutton to 
select the sound output.
L+R : Audio signal from audio L input is sent to left 
loud-speaker and audio signal from audio R input is 
sent to right loud-speaker.
L+L : Audio signal from audio L input is sent to left and right 
loud-speakers.
R+R : Audio signal from audio R input is sent to left and 
right loud-speakers.
LIST : Programme list
To display the programme list (0~ 99).
Q.VIEW : QUICK VIEW Button
To display the previously selected TV channel 
Note: TV channels displayed in blue have been setup
to be skipped in the Programme Edit menu.
Programme List
OK   MENU    
0     C     01 5     C     07
1     C     356     C     50
2     C     05 7 C     51
3     C     11 8 C     41
4     C     04 9 C     63
 
						

							13
PR
PR
OK
LIST
MENU
Q.VIEW
SLEEPARC/*
UPDATE
SIZE HOLD
INDEX
TEXT
TIME MIX
REVEALMODE
VOL
VOL
MX?i
Name of the Remote Control Buttons
Name and Function of the Parts
PR (          ) Buttons
Able to change channel.
VOL (          ) Buttons 
Able to adjust sound.
OK Button
Use when functional adjustment is completed.
MENU
Use this button to enter the On Screen Display menu.
SLEEP : SLEEP Timer
You can set a time period after which the 
TV / AV / RGB / Component / DVI should switch itself to standby.
Press the key repeatedly to select the number of minutes.
ARC 
To select the image size of the screen.• When TV / AV mode: Spectacle, Original, 4:3, 16:9, 14:9, Zoom1, Zoom2 • When RGB/DVI /Componentmode: 4:3, 16:9
TEXT
To select the teletext on or off. The main index page or the last
selected page appears on the screen together with an information
headline and an option line at the bottom of the screen.
1020 30
60
240 180
120
90_ _ _ (off)
 
						

							14
HOLD
Press the button to stop the automatically rotating
of the sub pages. Press the button again to
continue the automatic rotating again.
SIZE
Press the button repeatedly to display the upper
part, the lower part and then to return to the
normal page size. 
MIX
Display the teletext pages superimposed on
the TV picture. To switch the TV picture off
press this button again.
TIME
Press this button to select a sub page number. 
The sub page number is displayed at the 
bottom of the screen. To hold or change the 
sub page, press the RED/GREEN,          or 
NUMBER buttons. Press again to exit this 
function. 
Remote Control - Using the Teletext function
Please select your local teletext language. (page 30)
If you dont, the teletext may not appear correctly on the screen.
PR
PR
OK
LIST
MENU
Q.VIEW
SLEEPARC/*
UPDATE
SIZE HOLD
INDEX
TEXT
TIME MIX
REVEALMODE
VOL
VOL
MX?i
Yellow key 
Favourite Program On : Rotate favourite channel 
Favourite Program Off :  To display the previously   
selected TV channel.
Name and Function of the Parts
 
						

							15
REVEAL
Press the button to reveal/conceal the hidden
information, such as solutions to riddles and
puzzles. Press this button again to remove the
information from the display.
INDEX
To display the main index.
MODE 
The mode will be switched in the Teletext mode.
UPDATE
Press the button to appear the TV programme. 
At the top of screen indicates that you are still in the
teletext mode. Before interrupting teletext, you may
select a page number. When the page has been
found, the information line appears briefly on your
screen. Press the button again to reappear teletext.
Remote Control - Using the Teletext function
PR
PR
OK
LIST
MENU
Q.VIEW
SLEEPARC/*
UPDATE
SIZE HOLD
INDEX
TEXT
TIME MIX
REVEALMODE
VOL
VOL
MX?i
Name and Function of the Parts
 
						

							16
Name and Function of the Parts
RGB(PC/DTV) IN DVI IN
ANTENNA IN
  AUDIO
(RGB/DVI) IN
H/P S-VIDEO
AV IN 2 AV 1
(MONO)VIDEOAUDIOLR
AUDIO
COMPONENT INVIDEOYPBPRLR
RGB(PC/DTV) IN DVI INANTENNA IN  AUDIO
(RGB/DVI) IN
H/P S-VIDEO
AV IN 2 AV 1(MONO)VIDEOAUDIOLR
AUDIO
COMPONENT INVIDEOYPBPRLR
Rear View
Power Connector : Connect the power cord.
SCART Input/Output Terminal
AV Input Terminal
DVI Digital Signal Connector 
D-Sub Analog Signal Connector 
RGB, DVI Sound Jack : Connect to the jack in the PC sound card or D-TV sound Output  Jack. 
TV Tuner Jack : Connect the antenna.
Headphone/Earphone Connection Terminal
Component Input Terminal
 
						

							17
AV Input Terminal
S-VIDEO
AV IN 2(MONO)VIDEOAUDIO
LR
S-Video Input Terminal Audio Input TerminalVideo Input Terminal
Name and Function of the Parts
 
						

							18
    AUDIO
(RGB/DVI) IN
DVI IN
18
Connecting to your PC
First of all, see if the computer, product and the peripherals are turned off. 
Then, connect the signal input cable.
Connecting with the D-Sub signal input cable. 
Rear side of the product.
Connecting to External Devices
RGB(PC/DTV) IN
Macintosh Adapter (Not included)
Use the standard Macintosh adapter since an
incompatible adapter is available in the market.
(Different signaling system)
1.
Audio cable Connecting with the DVI signal input cable. 
A
B
2.
Rear side of the product.
Rear side of the product.
Rear side of the product.
Connect the audio cable.
•Make sure to check the sound card connection terminal in the PC before connecting to the product.
If the PC sound card supports both Speaker Out and Line Out, change it to Line Out by setting the jumper
or the PC application. (For more details, refer to the sound card user’s guide.)
- Speaker Out :The terminal connected to the speaker that is not equipped with an amplifier.
- *Line Out :The terminal connected to the speaker equipped with an amplifier.
If Audio Out in the PC sound card has only Speaker Out, reduce the PC volume. This product is integrated
with an amplifier.
RGB(PC/DTV) IN DV I  I NANTENNA IN  AUDIO
(RGB/DVI) INH/P S-VIDEO
AV IN 2 AV 1(MONO)VIDEOAUDIOLRAUDIO
COMPONENT INVIDEOYPBPRLR
 
						

							19
• Directly connect to a grounded power outlet on the wall or a power bar with a ground wire.Note
Turn on the PC. 2 1
Rear side of the product.Connect the power cord.
Select an input signal.
Press the INPUT button on the remote control to select the input signal. 
Or, press the INPUT button at the top side of the product. Turn on power by pressing the power button on the product.
Power button
• Select RGB
RGB(PC/DTV) IN DV I  I NANTENNA IN  AUDIO
(RGB/DVI) IN
H/P S-VIDEO
AV IN 2 AV 1(MONO)VIDEOAUD IOLR
AUD IO
COMPONENT INVIDEOYPBPRLR
3.
4.
5.
INPUT OK
Each time you press the Input button it will change to TV           AV1            AV2
Component          RGB         DVI
If nothing is inputted for several seconds the screen will automatically move to the selected menu. 
INPUT OK
Connecting to External Devices
Input 
TV
AV1
AV2
Component
RGB
DVI
OKAB• Select DVIInput 
TV
AV1
AV2
Component
RGB
DVI
OK