LG Flatron M208wa Users Guide

							Make sure to read the Safety Precautionsbefore using the product. 
Keep the Users Guide(CD) in an accessible place for furture reference.
See the label attached on the product and give the information to your dealer when you ask
for service.
M198WA
M208WA
M228WA
User’s Guide
 
						

							1
Safety Precautions
Please read these safety precautions carefully before using the product.
If you ignore the caution message, you may be slightly injured or the product may be damaged
If you ignore the warning message, you may be seriously injured or there is a possibility of
accident or death.Warning
Caution
Precautions in installing the Product
Keep away from heat sources like electrical heaters.
- Electrical shock, fire, malfunction or deformation may occur.
Keep the packing anti-moisture material or vinyl packing out of the reach of children.
- Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the
nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.
Do not put heavy objects on the product or sit upon it. 
- If the product collapses or is dropped, you may be injured. Children must pay particular attention.
Do not leave the power or signal cable unattended on the pathway.
- The passerby can falter, which can cause electrical shock, fire, product breakdown or injury.
Install the product in a neat and dry place.
- Dust or moisture can cause electrical shock, fire or product damage. 
If you can smell smoke or other odors or hear a strange sound unplug the power cord and contact the
service center. 
- If you continue to use without taking proper measures, electrical shock or fire can occur.
If you dropped the product or the case is broken, turn off the product and unplug the power cord. 
- If you continue to use without taking proper measures, electrical shock or fire can occur. Contact the service center.
Do not drop an object on or apply impact to the product. Do not throw any toys or objects on the product screen.- It can cause injury to human, problem to product and damage the display.  
Do not let the product fall or drop when connecting it with an external device. - This may cause injury and/or damage to the product. 
When connecting it with a game device, keep a distance of four times as long as the diagonal measurement of the
screen from the device.  
- If the product falls because of the short cable, this may cause injury and/or damage to the product.  
Leaving a fixed image on the screen for a long time may cause damage to the screen and cause
image burn-in. Make sure to use a screen saver on the product. 
Burn-in and related problems are not covered by the warranty on this product.
Make sure the product ventilation hole is not blocked. Install the product in a suitably wide place (more
than 10cm from the wall)
- If you install the product too close to the wall, it may be deformed or fire can break out due to internal heat.
Do not block the ventilation hole of the product by a tablecloth or curtain.
- The product can be deformed or fire can break out due to overheating inside the product.
Install the product on a flat and stable place that has no risk of dropping the product.
- If the product is dropped, you may be injured or the product may be broken.
Install the product where no EMI occurs.
Keep the product away from direct sunlight.
- The product can be damaged.
Warning
Caution
 
						

							22
Electrical Power Related Precautions
Make sure to connect the power cable to the grounded current.
- You may be electrocuted or injured.
Use the rated voltage only.
- The product can be damaged, or you may be electrocuted.
During a thunder or lightning storm, unplug the power cable or signal cable.
- You may be electrocuted or a fire can break out.
Do not connect several extension cords, electrical appliances or electrical heaters to a single outlet. 
Use a power bar with a grounding terminal designed for exclusive use with the computer.
- A fire can break out due to overheating.
Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or covered with dust, dry
the power plug completely or wipe dust off.
- You may be electrocuted due to excess moisture.
If you don’t intend to use the product for a long time, unplug the power cable from the product.
- Covering dust can cause a fire, or insulation deterioration can cause electric leakage, electric shock or fire.
Fix the power cable completely.
- If the power cable is not fixed completely, a fire can break out.
Hold the plug when pulling out the power cable. Do not bend the power cord with excessive force or put
heavy objects on the power cord.
- The power line can be damaged, which may cause electric shock or fire.
Do not insert a conductor (like a metal chopstick) into one end of the power cable while the other end is
connected to the input terminal on the wall. Additionally, do not touch the power cable right after
plugging into the wall input terminal.
- You may be electrocuted.
The power supply cord is used as the main disconnection device. Ensure that the socket-outlet is easily
accessible after installation.
Do not unplug the power cord while the product is in use.
- Electrical shock can damage the product.
Warning
Caution
Precautions in Moving the Product
Warning
Make sure to turn off the product.
- You may be electrocuted or the product can be damaged.
Make sure to remove all cables before moving the product.
- You may be electrocuted or the product can be damaged.
Safety Precautions
 
						

							3
Safety Precautions
Caution
Precautions in Using the Product
Warning
Do not put or store inflammable substances near the product.
- There is a danger of explosion or fire due to careless handling of the inflammable substances.
When cleaning the brown tube surface, unplug the power cord and scrub with soft cloth to prevent
scratching. Do not clean with a wet cloth.
- The water can sink into the product, which can cause electric shock or serious malfunction.
Take a rest from time to time to protect your vision.
Keep the product clean at all times.
Take a comfortable and natural position when working with a product to relax the muscles.
Take a regular break when working with a product for a long time.
Do not press strongly upon the panel with a hand or sharp object such as nail, pencil or pen, or make
a scratch on it.
Keep the proper distance from the product.
- Your vision may be impaired if you look at the product too closely.
Set the appropriate resolution and clock by referring to the User’s Guide.
- Your vision can be impaired.
Use authorized detergent only when cleaning the product. (Do not use benzene, thinner or alcohol.)
- Product can be deformed.
Caution
Do not shock the product when moving it.
- You may be electrocuted or the product can be damaged.
Do not dispose the product-packing box. Use it when you move.
Make the panel face forward and hold it with both hands to move.
- If you drop the product, the damaged product can cause electric shock or fire. Contact with the service center 
for repair.
Do not disassemble, repair or modify the product at your own discretion.
- Fire or electric shock accident can occur.
- Contact the service center for check, calibration or repair.
When cleaning the brown tube surface, unplug the power cord and scrub with soft cloth to prevent
scratching. Do not clean with a wet cloth.
Keep the product away from water.
- Fire or electric shock accident can occur.
The fluorescent lamp used in this product contains a small amount of mercury. 
Do not dispose of this product with general household waste.
Disposal of this product must be carried out in accordance to the regulations of your local authority.
On Disposal
 
						

							4
Before Connecting to the PC
Connecting the stand
Before setting up the product, ensure that the power supply, the computer system,
and other attached devices is turned off. 
1.Place the monitor with its front facing downward on a soft cloth.
2. Connect the Stand Base to the Stand Body and press latches at the button toward each end.
3.Connect the Stand, assembled in step 2, to the Monitor Panel until you hear a Click.
4.Once assembled take the monitor up carefully and face the front side
Important
Once you connect the stand base, try not to disconnect it.
Do not carry the product upside down holding only the stand base. The product may
fall and get damaged or injure your foot.
Stand
Slot
3.
Stand BodyStand Base2.
 
						

							5
Before setting up the product, ensure that the power supply, the computer system,
and other attached devices is turned off. 
Positioning your display
1.Adjust the position of the panel in various ways for maximum comfort.
Tilt Range : -3˚~10˚                             Swivel : 350˚
Before Connecting to the PC
Warning:
When adjusting the angle of the screen, do not put your
finger(s) in between the head of the monitor and the stand
body. You can hurt your finger(s).
AUDIO
COMPONENT IN
Locking Device
Use this locking cable (This has to be purchased
separately if required.) to prevent theft.
Theft prevention locking device
 
						

							6
Name and Function of the Parts
Name of the Remote Control Buttons (A Type)
POWERTVINPUT
PR
PR
OK MUTE
LIST
MENU
Q.VIEW
SLEEPARC
SSM PSM
TEXT
VOL
VOL
I/II
POWER
TV : TV button
INPUT
NOTE : In case of weak stereo
sound signals, with stereo or
Nicam stereo transmission,
select mono reception.
Each time you press the Input button it will
change to 
TV           AV1          AV2         Component       
RGB         DVI.
If nothing is inputted for several seconds the
screen will automatically move to the
selected menu. 
1. Take out the battery cap.
2. Insert the batteries with correct polarity (+/-).
3. Close the battery cap.
• Dispose of used batteries in the recycle bin to prevent environmental pollution.
Inserting batteries into remote control.
Number buttons
Able to directly select and change channel.
LIST : Programme list
To display the programme list (0~ 99).
Q.VIEW : QUICK VIEW Button
To display the previously selected TV channel 
Note: TV channels displayed in blue have been setup
to be skipped in the Programme Edit menu.
Programme List
OK   MENU    
0     C     01 5     C     07
1     C     356     C     50
2     C     05 7 C     51
3     C     11 8 C     41
4     C     04 9 C     63
Input 
TV
AV1
AV2
Component
RGB
DVI
OK
 
						

							7
PR (          ) Buttons
Able to change channel.
VOL (          ) Buttons 
Able to adjust sound.
OK Button
Use when functional adjustment is completed.
MUTESwitches the sound on or off.
PSM (Picture Status Memory) Button
Press repeatedly to select Dynamic, Standard, Mild, Gameor User
picture mode.
SSM (Sound Status Memory) ButtonUse this button to select the sound tone. Press repeatedly to select Flat, Music, Movie, Sports, Usersound tone.
TEXT
To select the teletext on or off. The main index page or the last
selected page appears on the screen together with an information
headline and an option line at the bottom of the screen.
PR
PR
OK MUTE
MENU
SLEEPARC
UPDATE
SIZE
HOLD
INDEX
SSM PSM
TEXT
TIME MIX
REVEALMODE
VOL
VOL
MX?i
I/II
MENU
Use this button to enter the On Screen Display menu.
SLEEP : SLEEP Timer
You can set a time period after which the 
TV / AV / RGB / Component / DVI should switch itself to standby.
Press the key repeatedly to select the number of minutes.
1020 30
60
240 180
120
90_ _ _ (off)
Name and Function of the Parts
Name of the Remote Control Buttons
 
						

							8
ARC To select the image size of the screen.• When TV / AV mode: Spectacle, Original, 4:3, 16:9, 14:9, Zoom1, Zoom2 • When RGB/DVI /Componentmode: 4:3, 16:9
I/II: Bilingual choice and sound mode selection
[TV]
To switch from Stereoto Monosound in case of stereo transmission,or from Nicam Stereoto Nicam Mono, in case of digital transmission.to switch from Nicam DualIto Nicam Dual IIor Nicam Dual
I+IIin case of Nicam Dual transmission.
to choose between DualI, Dual IIor Dual I+IIin case of
bilingual transmission : 
Dual I sends the primary broadcast language to the
loudspeakers ;
Dual II sends the secondary broadcast language to the
loudspeakers ;
Dual I+II sends a separate language to each loudspeakers.
[AV / Component]
In AV/Component mode, you can select output sound for the left and 
right loudspeakers. Repeatedly press the I/IIbutton to 
select the sound output.
L+R : Audio signal from audio L input is sent to left 
loud-speaker and audio signal from audio R input is 
sent to right loud-speaker.
L+L : Audio signal from audio L input is sent to left and right 
loud-speakers.
R+R : Audio signal from audio R input is sent to left and 
right loud-speakers.
PR
PR
OK MUTE
MENU
SLEEPARC
UPDATE
SIZE
HOLD
INDEX
SSM PSM
TEXT
TIME MIX
REVEALMODE
VOL
VOL
MX?i
I/II
Name and Function of the Parts
Name of the Remote Control Buttons
 
						

							9
HOLD
Press the button to stop the automatically rotating
of the sub pages. Press the button again to
continue the automatic rotating again.
SIZE
Press the button repeatedly to display the upper
part, the lower part and then to return to the
normal page size. 
MIX
Display the teletext pages superimposed on
the TV picture. To switch the TV picture off
press this button again.
TIME
Press this button to select a sub page number. 
The sub page number is displayed at the 
bottom of the screen. To hold or change the 
sub page, press the RED/GREEN,          or 
NUMBER buttons. Press again to exit this 
function. 
Remote Control - Using the Teletext function
Please select your local teletext language. (page 30)
If you dont, the teletext may not appear correctly on the screen.
PR
PR
OK MUTE
MENU
SLEEPARC
UPDATE
SIZE
HOLD
INDEX
SSM PSM
TEXT
TIME MIX
REVEALMODE
VOL
VOL
MX?i
I/II
Name and Function of the Parts
Yellow key 
Favourite Program On : Rotate favourite channel 
Favourite Program Off :  To display the previously   
selected TV channel.