LG Flatron L1972h Users Guide

A10
On Screen Display (OSD) Control Adjustment
Screen Adjustment
Making adjustments to the display's image size, position and operating
parameters is quick and easy with the On Screen Display Control
system(OSD). A short example is given below to familiarize you with the use
of the controls. The following section is an outline of the available
adjustments and selections you can make by using the OSD.
To make adjustments in the On Screen Display, follow these steps:
Press the MENU button, then the...

A11
On Screen Display (OSD) Selection and Adjustment 
NOTE
The order of icons may differ depending on the model (A11~A15).
The following table indicates all the On Screen Display control, adjustment,
and setting menus.
To adjust the brightness,
contrast and gamma of the
screenPICTURE
COLOR
POSITION
TRACKING
SETUP 
Main menu Sub-menu A      D                    Reference
PRESET
RED
GREEN
BLUE
To adjust the position of the
screen To customize the color of
the screen
To customize the screen
status for a...

A12
On Screen Display (OSD) Selection and Adjustment 
NOTE
OSD (On Screen Display) menu languages on the monitor may differ from the manual.
You were introduced to the procedure of selecting and adjusting an item
using the OSD system.  Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
Press the MENU Button, then the main menu of the OSD appears.
Menu Name
Icons
Button Tip
PICTURE
Sub-menus
MENU        : Exit
: Adjust (Decrease/Increase)
SET            :...

A13
On Screen \bisp\fay (OS\a\b) Se\fection and Adj\austment 
Main menu Sub menu Description
BRIGHT\bESS
C\f\bTRAST 
GAMMA
To adjust the bright\aness of the screen. \a
To adjust the contr\aast of the screen.
Set your own gamma \ava\fue. : -50/0/50
On the monitor, high\a gamma va\fues
disp\fay whitish images \aand \fow gamma
va\fues disp\fay high co\antrast images.
PICTUR\b
PRESET
RED
GREE\b
BLUE• sRGB: Set the screen \aco\for to fit the SRGB standard co\for
specification.
• 6500K: S\fight\fy reddish...

A14
On Screen Display (OSD) Selection and Adjustment 
Main menu Sub menu Description
CLOCK
PHASE
SHARPNESS
To minimize any vertical bars or stripes
visible on the screen background.
The horizontal screen size will also
change.
To adjust the focus of the display. 
This item allows you to remove any
horizontal noise and clear or sharpen
the image of characters.
To adjust the clearness of the screen.
TRACKING
If this does not improve the screen image, restore the factory default settings. 
If necessary,...

A15
On Screen Display (OSD) Selection and Adjustment 
Icons
Menu Name
Sub-menu Name
Main menu Sub menu Description
To adjust the USER sub-menu function,
Press the SET Button
MOVIE
TEXT
NORMAL
USER
When you execute F-ENGINE, two tones will appear
on  the  screen  as  shown.  The  applied  screen  will
appear  on  the  left  side,  whereas  the  non-applied
screen  will  appear  on  the  right  side.  Press  the  SET
button to use the adjusted screen.
FLATRON F-ENGINEScreen when applied Screen when not...

A16
Troubleshooting
No image appears
Check the following before calling for service.
No image appears
Do you see a OSD LOCKED message on the screen?
Is the power cord of the
display connected?
Is the power on and the
power indicator blue or
green?
Is the power indicator
amber?
Do you see an "OUT OF
RANGE" message on
the screen?
Do you see a "CHECK
SIGNAL CABLE"
message on the
screen?• Check and see if the power cord is connected
properly to the power outlet.
• Adjust the brightness...

A17
Troubleshooting
Display image is incorrect
Display Position is
incorrect.
On the screen
background, vertical
bars or stripes are
visible.
Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.• Press the AUTO/SETbutton to automatically
adjust your display image to the ideal setting. 
If the results are unsatisfactory, adjust the image
position using the H position and V positionicon
in the on screen display.
• Press the AUTO/SETbutton to automatically
adjust your...

A18A18
Troubleshooting
Have you installed the display driver?
Have you installed the
display driver?
Do you see an
"Unrecognized monitor,
Plug&Play (VESA DDC)
monitor found"
message?
• Be sure to install the display driver from the display
driver CD (or diskette) that comes with your
display. Or, you can also download the driver from
our web site: http://www.lge.com.
• Make sure to check if the video card supports
Plug&Play function.
Display image is incorrect
The screen color is
mono or...

A19
Specifications                                                                    
Display
Sync Input
Video Input
Resolution
Plug&Play
Power
Consumption
Dimensions
&Weight
Tilt/Height Range
Power Input
Environmental
Conditions19 inches (48.26 cm) Flat Panel Active matrix-TFT LCD 
Anti-Glare coating
Visible diagonal size : 48.26 cm
0.294 mm pixel pitch
Horizontal Freq. Analog : 30 - 83 kHz (Automatic)
Digital : 30 - 71 kHz (Automatic)
Vertical Freq. 56 - 75 Hz (Automatic)
Input Form Separate TTL,...