LG Flatron L1972h Users Guide

							A10
On Screen Display (OSD) Control Adjustment
Screen Adjustment
Making adjustments to the display's image size, position and operating
parameters is quick and easy with the On Screen Display Control
system(OSD). A short example is given below to familiarize you with the use
of the controls. The following section is an outline of the available
adjustments and selections you can make by using the OSD.
To make adjustments in the On Screen Display, follow these steps:
Press the MENU button, then the main menu of the OSD appears.
To select each item in the OSD menu, use the    o r  button. When the
icon you want is highlighted, press the AUTO/SET Button.
Use the   /      buttons to adjust the image to the desired level. Use the
AUTO/SET button to select other sub-menu items.
Press the MENU buttononce to return to the main menu to select another
function. Press the MENU buttontwice to exit from the OSD.
NOTE
Allow the display to stabilize for at least 30 minutes before making any  image
adjustments.
AUTO/SET
MENU MENU-+-+
-+
-+
Rownloaded'from'≤anual≤onitor4com'≤anuals 
						

							A11
On Screen Display (OSD) Selection and Adjustment 
NOTE
The order of icons may differ depending on the model (A11~A15).
The following table indicates all the On Screen Display control, adjustment,
and setting menus.
To adjust the brightness,
contrast and gamma of the
screenPICTURE
COLOR
POSITION
TRACKING
SETUP 
Main menu Sub-menu A      D                    Reference
PRESET
RED
GREEN
BLUE
To adjust the position of the
screen To customize the color of
the screen
To customize the screen
status for a user's operating
environmentTo improve the clarity and
stability, sharpness of the
screen 
BRIGHTNESS
CONTRAST
GAMMA
HORIZONTAL
VERTICAL
CLOCK
PHASE
SHARPNESS
WHITE BALANCE
POWER INDICATOR
FACTORY RESET
LANGUAGE
OSD         
HORIZONTAL
POSITION  VERTICAL
sRGB
6500K
9300K
: Adjustable
A : Analog Input
D : Digital Input
To select or customize 
desired image settingsFLATRON 
F-ENGINEMOVIE / TEXT
USER
NORMAL
Rownloaded'from'≤anual≤onitor4com'≤anuals 
						

							A12
On Screen Display (OSD) Selection and Adjustment 
NOTE
OSD (On Screen Display) menu languages on the monitor may differ from the manual.
You were introduced to the procedure of selecting and adjusting an item
using the OSD system.  Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
Press the MENU Button, then the main menu of the OSD appears.
Menu Name
Icons
Button Tip
PICTURE
Sub-menus
MENU        : Exit
: Adjust (Decrease/Increase)
SET            : Enter
: Select another sub-menu
-+
Rownloaded'from'≤anual≤onitor4com'≤anuals 
						

							A13
On Screen \bisp\fay (OS\a\b) Se\fection and Adj\austment 
Main menu Sub menu Description
BRIGHT\bESS
C\f\bTRAST 
GAMMA
To adjust the bright\aness of the screen. \a
To adjust the contr\aast of the screen.
Set your own gamma \ava\fue. : -50/0/50
On the monitor, high\a gamma va\fues
disp\fay whitish images \aand \fow gamma
va\fues disp\fay high co\antrast images.
PICTUR\b
PRESET
RED
GREE\b
BLUE• sRGB: Set the screen \aco\for to fit the SRGB standard co\for
specification.
• 6500K: S\fight\fy reddish \awhite.
• 9300K: S\fight\fy b\fuish wh\aite.
Set your own red c\ao\for \feve\fs.
Set your own green\a co\for \feve\fs.
Set your own b\fue c\ao\for \feve\fs.
COLOR
H\fRIZ\f\bTAL
VERTICALTo move image \feft a\and right.
To move image up and\a down.
POSITIO\f
C\fL\fR
P\fSITI\f\b
ME\bU : Exit
: \becrease
: Increase
SET : Se\fect another sub-\amenu
-+
ME\bU : Exit
: \becrease
: Increase
SET : Se\fect another sub-\amenu
-+
ME\bU : Exit
: \becrease
: Increase
SET : Se\fect another sub-\amenu
-+
PICTURE
 
						

							A14
On Screen Display (OSD) Selection and Adjustment 
Main menu Sub menu Description
CLOCK
PHASE
SHARPNESS
To minimize any vertical bars or stripes
visible on the screen background.
The horizontal screen size will also
change.
To adjust the focus of the display. 
This item allows you to remove any
horizontal noise and clear or sharpen
the image of characters.
To adjust the clearness of the screen.
TRACKING
If this does not improve the screen image, restore the factory default settings. 
If necessary, perform the white balance function again. This function will be enabled only when
the input signal is an analog signal. 
SETUPTo choose the language in which the
control names are displayed.
To adjust position of the OSD window
on the screen.LANGUAGE
OSD
POSITION
WHITE
BALANCE
FACTORY
RESET
If the output of the video card is different
the required specifications, the color
level may deteriorate due to video
signal distortion. Using this function, the
signal level is adjusted to fit into the
standard output level of the video card
in order to provide the optimal image.
Activate this function when white and
black colors are present in the screen.   
POWER
INDICATOR
Restore all factory default settings except
"LANGUAGE." 
TRACKING
SETUP
SETUP
Use this function to set the power
indicator on the front side of the monitor
to ONor OFF.
If you set OFF, it will go off. 
If you set ONat any time, the power
indicator will automatically be turned on.
Press the       button to reset immediately.-
MENU: Exit
: Decrease
: Increase
SET: Select another sub-menu
-+
MENU: Exit
: Adjust
: Adjust
SET: Select another sub-menu
-+
Rownloaded'from'≤anual≤onitor4com'≤anuals 
						

							A15
On Screen Display (OSD) Selection and Adjustment 
Icons
Menu Name
Sub-menu Name
Main menu Sub menu Description
To adjust the USER sub-menu function,
Press the SET Button
MOVIE
TEXT
NORMAL
USER
When you execute F-ENGINE, two tones will appear
on  the  screen  as  shown.  The  applied  screen  will
appear  on  the  left  side,  whereas  the  non-applied
screen  will  appear  on  the  right  side.  Press  the  SET
button to use the adjusted screen.
FLATRON F-ENGINEScreen when applied Screen when not applied
The OSD screen will appear when you touch the                     (-) button 
on the  front  of the monitor.
TEXT: For text images (Word processing etc.)
Select the           sub-menu using the SET button
and save the YESvalue using the buttons.SAVE
MOVIE: For animation images in videos or movies 
This is under normal operating conditions.
This feature lets you easily select the best desired
image condition optimized to the environment
(ambient illumination, image types etc).
User
You can manually adjust brightness, ACE or RCM. 
You can save or restore the adjusted value even 
when using a different environment. 
...(Brightness): Adjusts screen brightness....ACE(Adaptive Clarity Enhancer): Selects the clarity mode....RCM(Real Color Management): Selects the color mode.
Not applied
Green enhance 
Flesh tone
Color Enhance0
1
2
3
MENU: Exit
,     : Move
SET    : Select-+
MENU: Exit
: Decrease
: Increase
SET    : Select another sub-menu-+
Rownloaded'from'≤anual≤onitor4com'≤anuals 
						

							A16
Troubleshooting
No image appears
Check the following before calling for service.
No image appears
Do you see a OSD LOCKED message on the screen?
Is the power cord of the
display connected?
Is the power on and the
power indicator blue or
green?
Is the power indicator
amber?
Do you see an "OUT OF
RANGE" message on
the screen?
Do you see a "CHECK
SIGNAL CABLE"
message on the
screen?• Check and see if the power cord is connected
properly to the power outlet.
• Adjust the brightness and the contrast.
• If the display is in power saving mode, try moving
the mouse or pressing any key on the keyboard to
bring up the screen.
• Try to turn on the PC.
• This message appears when the signal from the
PC (video card) is out of horizontal or vertical
frequency range of the display. See the
'Specifications' section of this manual and
configure your display again.
• This message appears when the signal cable
between your PC and your display is not
connected. Check the signal cable and try again.
• You can secure the current control settings,
so that they cannot be inadvertently changed.
You can unlock the OSD controls at any time
by pushing the MENUbutton for several
seconds: the message 
“OSD UNLOCKED”will appear. Do you see “OSD
LOCKED” when you
push MENU button?
3ownloadedWfromWManualMonitorUcomWManuals 
						

							A17
Troubleshooting
Display image is incorrect
Display Position is
incorrect.
On the screen
background, vertical
bars or stripes are
visible.
Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.• Press the AUTO/SETbutton to automatically
adjust your display image to the ideal setting. 
If the results are unsatisfactory, adjust the image
position using the H position and V positionicon
in the on screen display.
• Press the AUTO/SETbutton to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
vertical bars or stripes using the CLOCKicon in
the on screen display.
• Press the AUTO/SETbutton to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the 
horizontal bars using the PHASEicon in the on 
screen display.
• Check Control Panel --> Display --> Settings
and adjust the display to the recommended
resolution or adjust the display image to the ideal
setting. Set the color setting higher than 24 bits
(true color).
Important
Check Control Panel --> Display --> Settingsand see if the frequency or the
resolution were changed. If yes, readjust the video card to the recommend
resolution.
The setting method can differ by computer and O/S (Operation System), 
and resolution mentioned above may not be supported by the video card    
performance. In this case, please ask to the computer or the video card  
manufacturer
. 
Rownloaded'from'≤anual≤onitor4com'≤anuals 
						

							A18A18
Troubleshooting
Have you installed the display driver?
Have you installed the
display driver?
Do you see an
"Unrecognized monitor,
Plug&Play (VESA DDC)
monitor found"
message?
• Be sure to install the display driver from the display
driver CD (or diskette) that comes with your
display. Or, you can also download the driver from
our web site: http://www.lge.com.
• Make sure to check if the video card supports
Plug&Play function.
Display image is incorrect
The screen color is
mono or abnormal.
The screen blinks.• Check if the signal cable is properly connected
and use a screwdriver to fasten if necessary.
• Make sure the video card is properly inserted in
the slot.
• Set the color setting higher than 24 bits (true color)
at Control Panel - Settings.
• Check if the screen is set to interlace mode and if
yes, change it to the recommend resolution.
Rownloaded'from'≤anual≤onitor4com'≤anuals 
						

							A19
Specifications                                                                    
Display
Sync Input
Video Input
Resolution
Plug&Play
Power
Consumption
Dimensions
&Weight
Tilt/Height Range
Power Input
Environmental
Conditions19 inches (48.26 cm) Flat Panel Active matrix-TFT LCD 
Anti-Glare coating
Visible diagonal size : 48.26 cm
0.294 mm pixel pitch
Horizontal Freq. Analog : 30 - 83 kHz (Automatic)
Digital : 30 - 71 kHz (Automatic)
Vertical Freq. 56 - 75 Hz (Automatic)
Input Form Separate TTL, Positive/Negative
SOG (Sync On Green), Digital(HDCP)
Signal Input 15 pin D-Sub Connector
DVI - D connector (Digital)
Input Form RGB Analog (0.7 Vp-p/ 75 ohm), Digital
Max Analog : VESA 1280 x 1024 @75 Hz
Digital : VESA 1280 x 1024 @60 Hz
Recommend VESA 1280 x 1024 @60 Hz
DDC 2B
On Mode:      34 W(Typ.)
Sleep Mode ≤ 1 W
Off Mode ≤ 1 W
Width x Height x Depth
[1] 40.88 cm(16.09 inches) x 45.97 cm(18.10 inches) x 23.60 cm(9.29 inches)
[2] 40.88 cm(16.09 inches) x 35.57 cm(13.93 inches) x 9.70 cm(3.19 inches)
Net 5.2 kg (11.46 lbs)
Tilt range0˚~30˚
Height range            102 mm / 4.02 inches
AC 100-240V~ 50/60Hz 0.8A 
Operating Conditions
Temperature 10˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing
Storage Conditions
Temperature -20˚C to 60 ˚C
Humidity 5 % to 90 % non-Condensing
(Width)
(Depth)(Height)(Width)(Depth)(Height)
Attached ( O ), Detached (     )
Wall-outlet type or PC-outlet typeStand Base
Power cord
NOTE
Information in this document is subject to change without notice.