LG Flatron L192ws Users Guide

							A10
On Screen Display (OSD) Control Adjustment
Screen Adjustment
$	
%\015	




	
	
	





&\015
	



	
\(
+

,

	



\015


\015


	

	
	

	
\015	



%\015	
	
	
\015
	

\015	

\(\)
To make adjustments in the On Screen Display, follow these steps:
Press the MENU Button, then the main menu of the OSD appears.
To access a control, use the      o r       Buttons. When the icon you want
becomes highlighted, press the  AUTO/SETButton.
Use the       /      Buttonsto adjust the item to the desired level.
Accept the changes by pressing the MENUButton.
Exit the OSD by Pressing the MENU Button.

Allow the display to stabilize for at least 30 minutes before making image adjustments.

On Screen Display(OSD) Selection and Adjustment 

OSD \(On Screen Display\) menu languages on the monitor may differ from the manual.
5
\015	

\(\)


0


	




	
	

$	\015
\012
$	\015
1
	
\015	

 *
\(\0156	\015
MENU        : Exit
: Adjust (Decrease/Increase)
SET        : Enter
: Select another sub-menu
Zownloadedjfromj≤anual≤onitorAcomj≤anuals
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
  -
4
4
Adjusts any vertical bars or stripes
visible on the screen background.
The horizontal screen size will also
change.
Adjusts the focus of the display. 
This item allows you to remove any
horizontal noise and clear or sharpen
text.
Adjust the clearness of the screen.
.+*213
!*: Exit
: Decrease
: Increase
: Select another sub-menu
 -3
4;
% Adjusts the screen image left and right.
Adjusts the screen image up and down.
\012\(1
!*: Exit
: Decrease
: Increase
: Select another sub-menu
Tltavaly
Zownloadedjfromj≤anual≤onitorAcomj≤anuals
Troubleshooting
*

	

No image appearsNo image appears
Do you see a OSD LOCKED message on the screen?
&
\0150
\012
#
\)
\0150
#&\012
\015#=
&
\0150
\012
#\015
0\015
=
&
\0150
\012

#
\0150
\012
#\015
$

=
&
\0150
\012
#\015
	$=
,

&

/*

3/
	&&

\0150
&=
,

&

/ 4 -
3
 +/
	&&

\0150
&=• Check and see if the power cord is connected
properly to the power outlet.
• Press the Power button.
• Adjust the brightness and the contrast.
• If the display is in power saving mode, try moving
the mouse or pressing any key on the keyboard to
bring up the screen.
• Try to turn on the PC.
• This message appears when the signal from the
PC (video card) is out of horizontal or vertical
frequency range of the display. See the
'Specifications' section of this manual and
configure your display again.
• This message appears when the signal cable
between your PC and your display is not
connected. Check the signal cable and try again.
• You can secure the current control settings,
so that they cannot be inadvertently changed.
You can unlock the OSD controls at any time
by pushing the !*button for several
seconds: the message 
>,
* -,?will appear. ,

&
>,
 -,?
0

\012&0
!*
$\015\015=

Troubleshooting
Have you installed the display driver?
4A

&\015#
\0150
#&\012
#A=
,

&

/*B#
	\015@
D
E%
,, F
	\015
\)#/
	&&=
• Be sure to install the display driver from the display
driver CD (or diskette) that comes with your
display. Or, you can also download the driver from
our web site: http://www.lge.com.
• Make sure to check if the video card supports
Plug&Play function.
Display image is incorrect
0
&

&
	

$	
0
&
$1&• Check if the signal cable is properly connected
and use a screwdriver to fasten if necessary.
• Make sure the video card is properly inserted in
the slot.
• Set the color setting higher than 24 bits (true color)
at  \015


\015\015&.
• Check if the screen is set to interlace mode and if
yes, change it to the recommend resolution.
Zownloadedjfromj≤anual≤onitorAcomj≤anuals
Specifications
Indicator
On Mode
Sleep Mode
Off ModeGreen
Amber
Off
LED Color
MODE
Preset Modes (Resolution)
Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
*15
16640 x 350
720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
832 x 624
1024 x 768
1024 x 768
1152 x 870
1152 x 900
1280 x 1024
1280 x 1024
1440 x 900
1440 x 900
1440 x 90031.469
31.468
31.469
37.500
37.879
46.875
49.725
48.363
60.123
68.681
61.805
63.981
79.976
55.469
55.935
70.63570
70
60
75
60
75
75
60
75
75
65
60
75
60
60
75
*Recommend Mode
Zownloadedjfromj≤anual≤onitorAcomj≤anuals 
						

							A21
Installing the Wall mount plate
This monitor satisfies the specifications of the  Wall mount plate or
the interchange device.
1.Put a cushion or soft cloth on a flat surface.2. Place  the  monitor  face  down  on
the cushion or soft cloth.     
3.Hold the product as it follows and lift up the Stand slightly.
4.Change your hold on the product as it follows and turn the Stand Base in the arrow
direction until you hear a "click."
5.Pull out the Stand to remove.
The Head part
The Stand 
base part
Zownloadedjfromj≤anual≤onitorAcomj≤anuals 
						

							A22
Installing the Wall mount plate

Wall mount plate(Separate purchase)
This is stnad-type or will mount type and is
connectable with Wall mount plate.
Please refer to the installation guide for more
details, which is provided when Wall mount plate is
purchased.
Kensington Security  Slot
Connected to a locking 
cable that can be purchased
separately at most 
computer stores
6.Installing the wall mount plate
Zownloadedjfromj≤anual≤onitorAcomj≤anuals 
						

							Digitally yours