LG Flatron L192ws Users Guide

Make sure to read the Important Precautionsbefore using this product. 
Keep the User's Guide(CD) in an accessible place for furture reference.
Have the model and serial number ready when calling for support.
L192WS
LCD Computer Monitor
User’s Guide
 

A1
This unit has been engineered and manufactured to ensure your personal
safety, however improper use may result in potential electrical  shock or fire
hazards. In order to allow the proper operation of all safeguards
incorporated in this display, observe the following basic rules for its
installation, use, and servicing.
On Safety
Use only the power cord supplied with the unit. In case you use another power
cord, make sure that it is certified by the applicable national standards if not being
provided...

A2
Import\bnt Pre\f\butions
On Installation
Do not allow anything to rest upon or roll over the power cord, and do n\
ot place the 
display where the power cord is subject to damage. 
Do not use this display near water such as near a bathtub, washbowl, kit\
chen sink, 
laundry tub, in a wet basement, or near a swimming pool.
Displays are provided with ventilation openings in the cabinet to allow \
the release of
heat generated during operation. If these openings are blocked, built-up\
 heat can
cause...

Connecting the Display
A3
Important
Do not remove and re-install the stand frequently, it could damage the stand.
Do not carry the product upside down holding only the stand base. The product may
fall and get damaged or injure your foot.
Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
Connecting the stand 
1. Place the monitor with its front facing downward on a soft cloth.
2.Assemble the Stand Body into the product in...

A4
Connecting the Display
1.Put a cushion or soft cloth on a flat surface.
To remove the Stand: 
2. Place  the  monitor  face  down  on
the cushion or soft cloth.     
3.Hold the product as it follows and lift up the Stand slightly.
4.Change your hold on the product as it follows and turn the Stand Base in the arrow
direction until you hear a "click."
5.Pull out the Stand to remove.
The Head part
The Stand 
base part
Zownloadedjfromj≤anual≤onitorAcomj≤anuals 

Connecting the Display
A5
To remove the Stand Base: 
2.
The body of the Stand and the Stand Base are successfully separated.
1.Separate the Stand Body by lifting it as pressing the arrow on the Stand Body while holding
the Stand Base with the other hand.
Zownloadedjfromj≤anual≤onitorAcomj≤anuals 

A6
Connecting the Display
20
Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off. 
Positioning your display
1.Adjust the position of the panel in various ways for maximum comfort.
Tilt Range : -5˚~20˚                            
Ergonomic
It is recommended that in order to maintain an ergonomic and comfortable viewing
position, the forward tilt angle of the monitor should not exceed 5 degrees.
When adjusting the angle of the...

2
1
A7
Conne\fting the Displ\u\by
1.Place the monitor in a convenient, well-ventilated location near your co\
mputer. 2.Connect the signal cable. When attached, tighten the thumbscrews to secure the 
connection.
3.Connect the power cord into a proper power outlet  that is easily access\
ible and close to
the display.
Wall-outlet type
PC-outlet type
MAC
Powe\f Co\fd Signal Cable
Va\fies acco\fding to mod\tel.
1
2
Mac adapte\fFor Appl\b Mac\fntosh u\ns\b, a  s\bparat\b plug \nadapt\br \fs n\b\bd\bd to...

A8
Control Panel Functions
MENU ButtonUse this button to enter or exit the On Screen Display.
Control Function
OSD LOCKED/UNLOCKED
This function allows you to lock the current control
settings, so that they cannot be inadvertently changed.
Press and hold the MENU buttonfor several seconds.
The message "OSD LOCKED"should appear.
You can unlock the OSD controls at any time by pushing
the MENU buttonfor several seconds. The message
"OSD UNLOCKED"should appear.
ButtonsUse these buttons to...

A9
Control Panel Functions
This Indicator lights up green when the display
operates normally(On Mode). If the display is in Sleep
Mode (Energy Saving), this indicator color changes 
to amber. Use this button to turn the display on or off.
Power Button
Power Indicator
Use this button to enter a selection in the On Screen 
Display.AUTO/SET
Button
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press
the AUTO/SETbutton before entering the On Screen
Display(OSD). This will automatically...