LG Avs2400 Owners Manual

Operation61
4
Operation
S\freen Layout
No 
Presentation
Far End Video
Near End Video
Far End VideoNear End Video
Near End Video
Far End Video
During a 
Presentation
Far End Presentation
Near End Video
Far End Video
Near End Video
Far End VideoNear End Video
Far End PresentationNear End Video
Near End Video
Far End Presentation
Near End Video
Far End Video
 

62Operation
4
Operation
Viewing Call Statistics
To view statistical information about a call, follow these steps:
1.  During a call, press the  button.
2.  \fudio and video stati\Bstics for the current call appear on \Bthe screen. 
Two columns of statisti\Bcs, Receive and Transmit appear. The total bandwidth used \Bfor audio and video\B appear alongside \Beach 
column heading. Each column has \Ba video and audio \Bblock.
• Video statistics inclu\Bde the following:
 -resolution shows the resolution, in...

Operation63
4
Operation
Ending a Call from the REDI\fL List
To hang up a call f\Brom the REDI\fL list, \Bfollow these steps:
1.  Press the  button to return to the main screen.
2.  On the REDI\fL list, \Ban orange LED indi\Bcator appears to the left of the voice or video numb\Ber currently in the call. Use the 
arrow keys to select the entry.
3.  Press OK.
Managing the REDI\fL\T List
Locking and Unlocki\Tng Entries in the REDI\fL Lis\Tt
You can lock and un\Block entries in the REDI\fL li\Bst. Locking an...

64Operation
4
Operation
Managing the Directory
If you have access to the local directory, you can add, remove or edit entries.
\fdding an Entry to the Local Directory
You can create up to 1 000 entries in the local di\Brectory. To add an entry to the local directory, follow the steps below:
1.  \fccess the directory by pressing the  button from the main screen.
2.  Using the arrow keys, select the Local directory.
3.  Select the \fdd New Entry button and press OK.
4.  Use the arrow keys to select fields...

Operation65
4
Operation
Editing an Entry in the Local Directory
You can edit an entry in the local directory.
1.  Select the entry you wish to edit.
2.  Press the  button.
3.  Select Edit from the menu, and press OK.
4.  Modify values in the\B Edit Directory Entry dialog.
4-1.  Press OK to select a field you wish to modify. If necessary, press the  button to change the method \Bof text entry for 
text fields.
4-2. \ffter completing your changes, press OK to exit the field.
5.  Using the arrow keys,...

66Monitor settings
\b
Monitor settings
Customizing OSD settings
Navigation button overview
ButtonOSD Des\fription
MENU
• Displays the main menu. 
• Enter the MENU option.
• Move to the previous menu.
MODE
• Displays the main menu.
• Enter the MODE option. \B
• Select the sub-menu title.
• Decrease the option valu\Be.
\fUTO
• Displays the main menu.
• Set the image adjustme\Bnt automatically. 
• Increase the option valu\Be.
INPUT
• Displays the main menu.
• Change the input sou\Brce. 
• Enter the sub-menu...

Monitor settings67
\b
Monitor settings
MENUSuppo\fted I\bputDesc\fiptio\b
PICTUREBRI\bHTNESSHDMI (Digital signal input.)
D-SUB (\fnalog signal input.)
You can adjust the le\Bvel of the Brightness. The lower the level, 
the softer the image.
CONTR\fSTYou can adjust the le\Bvel of the Contrast. Increases or decreases 
the gradient of the video\B signal. 
SH\fRPNESSYou can adjust the le\Bvel of the Sharpness..
BL\fCK LEVELHDMI (Digital signal input.)Sets black level of the screen to proper level. This...

68Monitor settings
\b
Monitor settings
OTHERSL\fN\bU\f\bEHDMI (Digital signal input.)
D-SUB (\fnalog signal input.)
To choose the langua\Bge in which the con\Btrol names are 
displayed.
POWER 
INDIC\fTOR
HDMI (Digital signal input.)
D-SUB (\fnalog signal input.)
Use this function to set the power indicator on the front side of 
the monitor to ON or OFF.
If you set OFF, it will go off. 
If you set ON at any time, the power indicator will automatically 
be turned on.
WHITE 
B\fL\fNCE
D-SUB (\fnalog signal...

Troubleshooting69
6
Troubleshooting
Check the following guide for the possible cau\Bse of a problem before contacting service.
Symptoms Solutions
The system power does not turn 
on.
Check the power cable is connec\Bted correctly.
Check the input voltage is correct.
Check the main power switch is turned on.
If the system power does not turn on even if the power cable is connec\Bted correctly, 
please contact the service center.
The system power is turned on 
but no video data is\B displayed 
on the...

70Troubleshooting
6
Troubleshooting
You can not make a call.If a call does not s\Buccessfully connec\Bt, verify that you have dialed a working number and 
that the far end dest\Bination is powered on and available. Verify that the network is ready 
and available. Network status is indicated at all times in th\Be status bar. If the VCS system 
is connected to the local network, a green network status icon appear\Bs. \f yellow or red 
network status icon indica\Btes a problem with the network connection....