LG Avs2400 Owners Manual

Installation31
3
Installation
 -Select \fnswer and press OK to accept the call.
 -Select Ignore and press OK to reject the call.
• \futo \fnswer Mute: If it is set to Enabled (the defa\Bult), and the \futo \fnswer preference is set to Enabled, the system is 
muted when a call con\Bnects.
• \futo \fnswer Multiway Call: If it is set to Enabled, the system automatically answers after the first call is \Bconnected. The 
Multiway call function is allowed only for audio call.
\fdmission Control
You can...

32Installation
3
Installation
Changing the \fdministrator Password
You can protect the administrator preferences with a secure password to prevent occasional user\Bs from changing them.  
To change the admini\Bstrator password, follow these steps:
1.  From the System Menu, access Admi\bist\fato\f P\fefe\fe\bces : Secu\fity : Passwo\fds.
2.  Enter a new password in the New Password field below \fdministrator Password and press OK.
NOTE
• If you did not change th\Be administrator password during initial...

Installation33
3
Installation
Viewing Recent Configuration Changes
\fs an aid to troubleshooting issue\Bs that you may encounter with your system or to quickly access a preference that has been 
recently changed, view the preferences in Admi\bist\fato\f P\fefe\fe\bces : Rece\bt. Preferences that have dependencies on \Bother 
preference settings, such as H.323 an\Bd SIP server preferences, may not appear in Recent.
NOTE
Upgrading the system software removes all preferences from the Recent screen....

34Installation
3
Installation
Selecting the \fctive Microphone
To select a device to serve as the active microphone, navigate to Admi\bist\fato\f P\fefe\fe\bces : Audio and select a device in 
the \fctive Microphone preference. The options that are available for the \fctive Microphone are \futo (default), Microphone 
In, and Camera 1.
When the \fctive Microphone preference is set to \futo (the default), or \Bif the option selected is not connected to the system, 
the system automatically attempts to...

Installation35
3
Installation
Configuring Network Usage
To configure preferences that affect how your system functions with other servers and devices on your local network, access 
Admi\bist\fato\f P\fefe\fe\bces : Netwo\fk : Ge\be\fal.
NOTE
This unit cannot detect a change to its IP address if the change i\Bs due to a change in networks from a wiring closet or through 
software, such as a change\B to a router configuration. Reboot the system if the DNS chang\Bes.
Specifying a Locally Configured IP...

36Installation
3
Installation
Specifying a VL\fN Tag
If you have static virtual local area networks ( VL\fNs) configured in your environment, you can configure your system to apply 
a VL\fN tag to outgoing packets and only accept \Bincoming tagged pac\Bkets that have the same VL\fN identifier. 
To enable this feature, navigate to Admi\bist\fato\f P\fefe\fe\bces : Netwo\fk : Ge\be\fal : VLAN Tag and specify the VL\fN 
identifier of the VL\fN to which the system is assigned. The value is a numb\Ber in the...

Installation37
3
Installation
Enabling Network \fddress Translation (N\fT)
Network \fddress Translation (N\fT ) enables communic\Bation between devices on your L\fN that have private IP addresses and 
devices that are accessed through a public IP ne\Btwork. Static N\fT ensures that the same publ\Bic IP address always maps to a 
system’s private IP address so that data from the public network intended for the private system can be routed to the system 
reliably. 
If you are using static N\fT to associate...

38Installation
3
Installation
H.323 two-way call required ports:
Call Type Numbe\f of Requi\fed UDP a\bd TCP Po\fts 
Video 
• 8 UDP ports (6 if presentations are disabled)
• 2 TCP ports
• TCP port 1720
• Each additional vid\Beo participant added requires 8 UDP ports and 2 TCP ports per H.323 
participant.
Voice 
• 2 UDP ports 
• 2 TCP ports
• TCP port 1720
• Each additional aud\Bio participant added requires 2 UDP ports and 2 TCP ports.
SIP two-way call required ports:
Call Type Numbe\f of Requi\fed UDP...

Installation39
3
Installation
Disabling \fccess to the Local Directory
By default, users ca\Bn place calls usin\Bg entries in the local di\Brectory and add, remove, or modify these e\Bntries. 
For more information, refer to “Placing a Call from the Directory” on page 57.
\fdministrators can disable us\Ber access to the local directory by setting Local Directory to Disabled in Admi\bist\fato\f 
P\fefe\fe\bces : Di\fecto\fy : Ge\be\fal. 
Disabling access to the local directory also disables the\B...

40Installation
3
Installation
Reading from an LD\fP Server
When you enable and confi\Bgure LD\fP preferences to populate the corporate directory, you specify the hostn\Bame, login and 
query parameters, and the refresh interval for reading data from a preconfigured LD\fP server. L\b recommends that you use 
an LD\fP server configured with an H.350 co\Bmpliant schema.
LDAP Conne\ftion Status Des\fription 
Unregistered LD\fP preferences are not configured.
Registered LD\fP preferences are configured. The...