LG Avs2400 Owners Manual
Here you can view all the pages of manual LG Avs2400 Owners Manual. The LG manuals for Monitor are available online for free. You can easily download all the documents as PDF.
Page 51
Installation51 3 Installation Do Not Disturb \fctivate the system Do Not Disturb feature. For more information, refer to “\fnswering or Rejecting a Call” on page 58.
Page 52
52Installation 3 Installation Exclusive Web \fdministration Features You can perform the same administr\Bative configuration from the web administration in\Bterface that is available from the user interface. The web administration in\Bterface contains the following additional features not available from the user interface. Using \fdvanced Directory Features \fdvanced usage of th\Be directory is available only from the web administration in\Bterface. On the Directory tab, the List \fll button retrieves...
Page 53
Installation53 3 Installation 3. Close all calls co\Bnnected to the system. If calls are connected when you perform a restore, a dialog appears\B prompting you to continue or cance\Bl the restore. If you continue, the system restore process terminates the calls. 4. In the web administration in\Bterface, navigate to P\fefe\fe\bces : System : System Reset. 5. Click System Restore. 6. If an error dialog appears, examine the errors. You may wish to copy and paste the errors into a text editing program...
Page 54
54Installation 3 Installation Managing Calls from the Web \fdministration Interface You can place calls\B from the Directory tab by selecting an entry and clicking Dial. Dialing an entry from the directory invokes the Call Manager. The Call Manager tab includes\B all call manageme\Bnt features that are available to users. When you move the pointer over an interface element, a tool tip appears to assist you with identifying \Bthe call management \Bfeature associated with that element. Data tha\Bt...
Page 55
Installation55 3 Installation Upgrade Error Codes Following are the error codes you may receive when an upgrade fails. Code Problem Des\fription 1 Internal error The system is missing critical files. 2 Switch to upgrade failed The command to set the active partition failed. 3 Write failed \f write failure occurred during copying of the image to the upgrade partition. This typically occurs wh\Ben using an upgrade image for another LifeSize product. 4 Read failed Reading incoming da\Bta failed during...
Page 56
56Operation 4 Operation Near End Video Quality Before you place a call, examine the near \Bend video image of\B the camera. If the image flickers, colors appear un\Bbalanced, or the image appears too dark, you may need to adjust the room lighting or cam\Bera brightness and whitebalance. Placing a Call You can place a vid\Beo or voice call with your VCS system in the following ways: • Select a stored number from the REDI\fL list o\Bn the main screen or from the directory. • Manually dial a num\Bber using...
Page 57
![Page 57
Operation57
4
Operation
NOTE
• Selecting \futo from the Video Call selection before placing a call d\Boes not change the b\Bandwidth selection for an entry
on the REDI\fL list th\Bat does not have \futo as its last called\B bandwidth.
• You can adjust the ma\Bximum number of en\Btries that appear in th\Be REDI\fL list by adjusting the [Maximum Redial
Entries] preference in the Use\f P\fefe\fe\bces : Calls menu.
• The [None] option for the [Maximum Redial Entries] preference removes existing entries...](http://img.usermanuals.tech/thumb/47/51973/w300_lg_avs2400-owner-s-manual-56.png "Page 57
Operation57
4
Operation
NOTE
• Selecting \futo from the Video Call selection before placing a call d\Boes not change the b\Bandwidth selection for an entry
on the REDI\fL list th\Bat does not have \futo as its last called\B bandwidth.
• You can adjust the ma\Bximum number of en\Btries that appear in th\Be REDI\fL list by adjusting the [Maximum Redial
Entries] preference in the Use\f P\fefe\fe\bces : Calls menu.
• The [None] option for the [Maximum Redial Entries] preference removes existing entries...")
Operation57 4 Operation NOTE • Selecting \futo from the Video Call selection before placing a call d\Boes not change the b\Bandwidth selection for an entry on the REDI\fL list th\Bat does not have \futo as its last called\B bandwidth. • You can adjust the ma\Bximum number of en\Btries that appear in th\Be REDI\fL list by adjusting the [Maximum Redial Entries] preference in the Use\f P\fefe\fe\bces : Calls menu. • The [None] option for the [Maximum Redial Entries] preference removes existing entries...
Page 58
58Operation 4 Operation 2. Enter the number you wish to call. The last manually en\Btered number appears \Bby default. To edit the number, use the following keys: • The button behaves as the backspace\B. • The button displays the keyboard from which you can enter alphanumeric characters. Use the arrow keys to navigate to the character you wish to enter and press OK. • The button changes the text entry method (indicated at the bottom of the screen). NOTE The 0x1a option enab\Bles you to enter an...
Page 59
Operation59 4 Operation Using System Do Not Disturb You can enable the s\Bystem Do Not Disturb feature to show only the background image of the m\Bain screen with the status a\Bnd navigation bars and a\B system Do Not Disturb message. When the system Do Not Disturb feature is enabled, the system responds only to the volume control buttons and the OK button on the remote control. Callers hear a busy\B signal and missed cal\Bls appear in the REDI\fL list. \BConsider using this \Bfeature, for example, if...
Page 60
60Operation 4 Operation Hiding or Showing User Interface Elements By default, the system information, status bar an\Bd navigation bar fade f\Brom the screen after a call has been\B connected for 10 seconds. This interval resets after any interaction with the system. You can adjust the du\Bration of the fade o\But interval by adjusting the Fade Out Timeout preference in Use\f P\fefe\fe\bces : Appea\fa\bce menu. To hide or show these user interface elements at any time during a call, press the button....