LG 55LA8600, 60LA8600 Led Tv Owners Manual

							OWNER’S MANUAL
EXTERNAL CONTROL
DEVICE SETUP
Please  read  this  manual  carefully  before  operating  the  set  and  retain  it  for 
future reference.
www.lg.com  
						

							2
ENG
ENGLISH
2KEY CODES
KEY CODES
• This feature is not available for all models.
Code 
(Hexa)FunctionNoteCode 
(Hexa)FunctionNote
00CH +, PR +R/C Button45Q.MenuR/C Button
01CH -, PR -R/C Button4CList, - (ATSC Only)R/C Button
02Volume +R/C Button53ListR/C Button
03Volume -R/C Button5BExitR/C Button
06> (Arrow Key / Right Key)R/C Button61BlueR/C Button
07< (Arrow Key / Left Key)R/C Button63YellowR/C Button
08PowerR/C Button71GreenR/C Button
09MuteR/C Button72RedR/C Button
0BInputR/C Button79Ratio / Aspect RatioR/C Button
0ESLEEPR/C Button91AD (Audio Description)R/C Button
0FTV, TV/RADR/C Button7AUser GuideR/C Button
10 - 19Number Key 0 - 9R/C Button7CSmart / HomeR/C Button
1AQ.View / FlashbackR/C Button7ESIMPLINKR/C Button
1EFAV (Favorite Channel)R/C Button8E►► (Forward)R/C Button
20Text (Teletext)R/C Button8F◄◄ (Rewind)R/C Button
21T. Opt (Teletext Option)R/C ButtonAAInfoR/C Button
28Return (BACK)R/C ButtonABProgram GuideR/C Button
30AV (Audio / Video) ModeR/C ButtonB0► (Play)R/C Button
39Caption/SubtitleR/C ButtonB1ꕗ (Stop / Live TV)R/C Button
40Λ (Arrow Key / Cursor Up)R/C ButtonBAꕘ  (Freeze / Slow Play / 
Pause)R/C Button
41V   (Arrow Key / Cursor 
Down)R/C ButtonBDꔄ  (REC)R/C Button
42My AppsR/C ButtonDC3DR/C Button
43Menu / SettingsR/C Button9FApp / *R/C Button
44OK / EnterR/C Button
* Key code 4C (0x4C) is available on ATSC/ISDB models which use major/minor channel. 
(For South Korea, Japan, North America, Latin America except Colombia models) 
						

							3
ENG
ENGLISH
3EXTERNAL CONTROL DEVICE SETUP
EXTERNAL CONTROL DEVICE SETUP
• Image shown may differ from your TV.
Connect the USB to Serial converter/RS-232C input jack to an external control device (such as a computer 
or an A/V control system) to control the product’s functions externally.
Note: The type of control port on the TV can be different between model series.
* Please be advised that not all models support this type of connectivity.
* Cable is not provided.
USB to Serial converter with USB Cable
USB Type
USB IN( T V )
(PC)
(PC)
RS-232C IN(CONTROL & SERVICE\
)
( T V )
( T V )(PC)
( T V )(PC)
SERVICE ONLY
RS-232C IN(CONTROL & SERVICE\
)
RS-232C IN(CONTROL & SERVICE\
)
1
3
2
1
3
2
• LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product ID : 0x2008) USB to serial converter 
which is not made nor provided by LG.
• It can be purchased from computer stores that carry accessories for IT  support professionals.  
						

							4
ENG
ENGLISH
4EXTERNAL CONTROL DEVICE SETUP
RS-232C with RS-232C Cable (Legacy)
Phone jack Type
• You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and 
the TV, which is specified in the manual.
* For other models, connect to the USB port.
USB IN( T V )
(PC)
(PC)
RS-232C IN(CONTROL & SERVICE\
)
( T V )
( T V )(PC)
( T V )(PC)
SERVICE ONLY
RS-232C IN(CONTROL & SERVICE\
)
RS-232C IN(CONTROL & SERVICE\
)
1
3
2
1
3
2
 -This connection can only be used for the following models: 55/47/39LN5450-UA,  
55/50/47/42LN5400-UA, 42/39/32LN5300-UA, and 37/32LN530B-UA. 
USB IN( T V )
(PC )
(PC)
RS-232C IN(CONTROL & SERVICE\
)
( T V )
( T V )(PC)
( T V )(PC)
SERVICE ONLY
RS-232C IN(CONTROL & SERVICE\
)
RS-232C IN(CONTROL & SERVICE\
)
1
3
2
1
3
2
 -This connection can only be used for the following models: 42/50PN4500-UA, 50/60PN5300-UF , 
50/60PN6500-UA, and 60PN6550-UA.
Customer ComputerRS-232C configurations
3-Wire Configurations(Not standard)
1
6 5
9PC TV
RXD 2 2TXD
TXD 3 1RXD
GND 5 3GND
OR
RXD 3 2TXD
TXD 2 1RXD
GND 5 3GND
D-Sub 9 Phone
RS-232C
(Serial port)
Set ID
For Set ID number, see "Real Data Mapping" on p.6
1. Press SETTINGS to access the main menus.
2. Press the Navigation buttons to scroll to OPTION and press OK.
3. Press the Navigation buttons to scroll to SET ID and press OK.
4. Scroll left or right to select a set ID number and select CLOSE. The adjustment range is 1-99.
5. When you are finished, press EXIT. 
						

							5
ENG
ENGLISH
5EXTERNAL CONTROL DEVICE SETUP
Communication Parameters
• Baud rate : 9600 bps (UART)
• Data length : 8 bits
• Parity : None
• Stop bit : 1 bit
• Communication code : ASCII code
• Use a crossed (reverse) cable.
Command reference list
(Depending on model)
COMMAND1COMMAND2DATA
(Hexadecimal)COMMAND1COMMAND2DATA
(Hexadecimal)
01. Power offka0013. Balancekt00 to 64
02. Aspect 
Ratiokc(p.7)
14. Color 
(Colour)
Temperature
xu00 to 64
03. Screen 
Mutekd(p.7)
15. ISM 
Method (Only 
Plasma TV)
jp(p.8)
04. Volume 
Muteke00 to 0116. Energy 
Savingjq00 to 05
05. Volume 
Controlkf00 to 6417. Tune 
Commandma(p.8)
06. Contrastkg00 to 64
18. Channel
(Programme)
Add/Del(Skip)
mb00 to 01
07. 
Brightnesskh00 to 6419. KeymcKey Codes
08. Color/
Colourki00 to 64
20. Control 
Back Light, 
Control Panel 
Light
mg00 to 64
09. Tintkj00 to 6421. Input 
select (Main)
xb(p.10)
10. 
Sharpnesskk00 to 3222. 3D (Only 
3D models)
xt(p.11)
11. OSD 
Selectkl00 to 01
23. Extended 
3D (Only 3D 
models)
xv(p.11)
12. Remote 
Control Lock 
Mode
km00 to 01
* Note: During USB operations such as DivX or EMF, all commands except Power(ka) and Key(mc) are 
not executed and treated as NG.  
						

							6
ENG
ENGLISH
6EXTERNAL CONTROL DEVICE SETUP
Transmission / Receiving Protocol
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
[Command 1] : First command to control the TV. (j, k, m or x)
[Command 2]  : Second command to control the TV.
[Set ID]  :   You can adjust the [Set ID] to choose desired monitor ID number in option menu.  
Adjustment range in TV is 1 to 99.  If [Set ID] value is selected to ‘0’, every connected set 
can be controlled.
     *  [Set ID] is indicated as decimal (1 to 99) on menu and as Hexadecimal (0x00 to 0x63) on 
transmission/receiving protocol.
[DATA]   : To transmit command data (hexadecimal).  Transmit ‘FF’ data to read status of command.
[Cr]   : Carriage Return - ASCII code ‘0x0D’
[   ]   : Space – ASCII code ‘0x20’
OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
* The set transmits ACK (acknowledgement) based on this format when receiving normal data. At this time, 
if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the 
data of the PC computer.
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
* The set transmits ACK (acknowledgement) based on this format when receiving abnormal data from non-
viable functions or communication errors.
Data 00: Illegal Code
Real data mapping (Hexadecimal b Decimal)
* When you enter the [data] in hexadecimal, refer to following conversion table.
* Channel Tune (ma) Command uses two-byte hexadecimal value([data]) to select channel number.
00 : Step 032 : Step 50 (Set ID 50)   FE : Step 254
01 : Step 1 (Set ID 1)33 : Step 51 (Set ID 51)   FF : Step 255
.........
0A : Step 10 (Set ID 10)63 : Step 99 (Set ID 99)01 00 : Step 256
.........
0F : Step 15 (Set ID 15)C7 : Step 19927 0E : Step 9998
10 : Step 16 (Set ID 16)C8 : Step 20027 0F : Step 9999
......... 
						

							7
ENG
ENGLISH
7EXTERNAL CONTROL DEVICE SETUP
* Commands may work differently depending on model and signal.
01. Power (Command: k a)
 ►To control Power Off of the set.
Transmission[k][a][  ][Set ID][  ][Data][Cr]
Data 00 : Power Off
Ack [a][ ][Set ID][ ][OK/NG][Data][x]
 ►To Show Power On. (Works TV is On Only)
Transmission [k][a][ ][Set ID][ ][FF][Cr]
Ack [a][ ][Set ID][ ][OK][01][x]
* Similarly, if other functions transmit ‘FF’ data 
based on this format, Acknowledgement feedback 
presents status about each function.
02. Aspect Ratio (Command: k c) 
(Main Picture Size)
 ►To adjust the screen format. (Main picture format) 
You can also adjust the screen format using the 
Aspect Ratio in the Q.MENU. or PICTURE menu.
Transmission [k][c][ ][Set ID][ ][Data][Cr]
Data 01 :   Normal screen 
(4:3)
 02 :  Wide screen 
(16:9)
  04 : Zoom
 05 : Zoom 2
   (Latin America 
except Colombia 
Only)
 06 :  Set by Program/ 
Original
07 : 14:9
(Europe, Colombia, Mid-East, 
Asia except South Korea and 
Japan)
09 : * Just Scan
0B : Full Wide
(Europe, Colombia, Mid-
East, Asia except South 
Korea and Japan)
10 to 1F :   Cinema Zoom 1 
to 16
Ack [c][ ][Set ID][ ][OK/NG][Data][x]
* Using the PC input, you select either 16:9 or 4:3 
screen aspect ratio.
* In DTV/HDMI/Component mode (high-definition), 
Just Scan is available.
* Full wide mode may work differently based on 
model and is supported for DTV fully, and ATV, 
AV partially.
03. Screen Mute (Command: k d)
 ►To select screen mute on/off.
Transmission [k][d][ ][Set ID][ ][Data][Cr]
Data 00 :  Screen mute off (Picture on) 
Video mute off
  01 :  Screen mute on (Picture off)
  10 : Video mute on
Ack [d][ ][Set ID][ ][OK/NG][Data][x]
* In case of video mute on only, TV will display On 
Screen Display(OSD). But, in case of Screen mute 
on, TV will not display OSD.
04. Volume Mute (Command: k e)
 ►To control volume mute on/off. 
You can also adjust mute using the MUTE button 
on remote control.
Transmission [k][e][ ][Set ID][ ][Data][Cr]
Data 00 :   Volume mute on (Volume off)
 01 :  Volume mute off (Volume on)
Ack [e][ ][Set ID][ ][OK/NG][Data][x]
05. Volume Control (Command: k f)
 ►To adjust volume. 
You can also adjust volume with the volume 
buttons on remote control.
Transmission [k][f][ ][Set ID][ ][Data][Cr]
Data Min :   00 to Max : 64
Ack [f][ ][Set ID][ ][OK/NG][Data][x]
06. Contrast (Command: k g)
 ►To adjust screen contrast. 
You can also adjust contrast in the PICTURE 
menu.
Transmission [k][g][ ][Set ID][ ][Data][Cr]
Data Min :   00 to Max : 64
Ack [g][ ][Set ID][ ][OK/NG][Data][x]
07. Brightness (Command: k h)
 ►To adjust screen brightness. 
You can also adjust brightness in the PICTURE 
menu.
Transmission [k][h][ ][Set ID][ ][Data][Cr]
Data Min :   00 to Max : 64
Ack [h][ ][Set ID][ ][OK/NG][Data][x]
08. Color/Colour (Command: k i)
 ►To adjust the screen Color(Colour). 
You can also adjust colour in the PICTURE menu.
Transmission [k][i][ ][Set ID][ ][Data][Cr]
Data Min :   00 to Max : 64
Ack [i][ ][Set ID][ ][OK/NG][Data][x]  
						

							8
ENG
ENGLISH
8EXTERNAL CONTROL DEVICE SETUP
09. Tint (Command: k j)
 ►To adjust the screen tint. 
You can also adjust tint in the PICTURE menu.
Transmission [k][j][ ][Set ID][ ][Data][Cr]
Data Red :   00 to Green : 64
Ack [j][ ][Set ID][ ][OK/NG][Data][x]
10. Sharpness (Command: k k)
 ►To adjust the screen sharpness. 
You can also adjust sharpness in the PICTURE 
menu.
Transmission [k][k][ ][Set ID][ ][Data][Cr]
Data Min :   00 to Max : 32
Ack [k][ ][Set ID][ ][OK/NG][Data][x]
11. OSD Select (Command: k l)
 ►To select OSD (On Screen Display) on/off when 
controlling remotely.
Transmission [k][l][ ][Set ID][ ][Data][Cr]
Data 01 :   OSD off01 : OSD on
Ack [l][ ][Set ID][ ][OK/NG][Data][x]
12. Remote control lock mode (Command: k m)
 ►To lock the front panel controls on the monitor and 
remote control.
Transmission [k][m][ ][Set ID][ ][Data][Cr]
Data 01 : Lock off01 : Lock on
Ack [m][ ][Set ID][ ][OK/NG][Data][x]
* If you are not using the remote control, use this 
mode. 
When main power is off & on (plug-off and plug-in, 
after 20 - 30 seconds), external control lock is 
released.
* In the standby mode (DC off by off timer or ‘ka’, 
‘mc’ command), and if key lock is on, TV will not 
turn on by power on key of IR & Local Key.
13. Balance (Command: k t)
 ►To adjust balance. 
You can also adjust balance in the AUDIO menu.
Transmission [k][t][ ][Set ID][ ][Data][Cr]
Data Min :   00 to Max : 64
Ack [t][ ][Set ID][ ][OK/NG][Data][x]
14.  Color(Colour) Temperature (Command: x u)
 ►To adjust colour temperature. You can also adjust 
Color(Colour) Temperature in the PICTURE menu.
Transmission [x][u][ ][Set ID][ ][Data][Cr]
Data Min :   00 to Max : 64
Ack [u][ ][Set ID][ ][OK/NG][Data][x]
15. ISM Method (Command: j p) (Only Plasma TV)
 ►To control the ISM method. You can also adjust 
ISM Method in OPTION menu.
Transmission [j][p][ ][Set ID][ ][Data][Cr]
Data Min :   02: Orbiter 
08: Normal 
20: Color(Colour) Wash
Ack [p][ ][Set ID][ ][OK/NG][Data][x]
16.  Energy Saving (Command: j q)
 ►To reduce the power consumption of the TV. You 
can also adjust Energy Saving in PICTURE menu.
Transmission [j][q][ ][Set ID][ ][Data][Cr]
Data 
 00 : Off
 01 : Minimum
 02 : Medium
 03 : Maximum
 04 : Auto
 05 : Screen off
* (Depending on model)
Ack [q][ ][Set ID][ ][OK/NG][Data][x]
17.   Tune Command (Command: m a)
* This command may work differently depending on 
model and signal.
• For Europe, Mid-East, Colombia, Asia except 
South Korea and Japan, Model
 ►Select channel to following physical number.
Transmission [m][a][ ][Set ID][ ][Data 00][ ]
[Data 01][ ][Data 02][Cr]
* Analogue Terrestrial/Cable
[Data 00][Data 01] Channel Data
Data  00 : High byte channel data
Data  01 : Low byte channel data
  - 00 00 ~ 00 C7 (Decimal : 0 ~ 199)
Data 02 : Input Source (Analogue)
 - 00 : Terrestrial TV (ATV)
 - 80 : Cable TV (CATV) 
						

							9
ENG
ENGLISH
9EXTERNAL CONTROL DEVICE SETUP
* Digital Terrestrial/Cable/Satellite
[Data 00][Data 01]: Channel Data
Data 00 : High Channel data
Data 01 : Low Channel data
 - 00 00 ~ 27 0F (Decimal: 0 ~ 9999)
Data  02 : Input Source (Digital)
 - 10 : Terrestrial TV (DTV)
 - 20 : Terrestrial Radio (Radio)
 - 40 : Satellite TV (SDTV)
 - 50 : Satellite Radio (S-Radio)
 - 90 : Cable TV (CADTV)
 - a0 : Cable Radio (CA-Radio)
* Tune Command Examples:
1. Tune to the analogue terrestrial (PAL) Channel 10. 
Set ID = All = 00 
Data 00 & 01 = Channel Data is 10 = 00 0a 
Data 02 = Analogue Terrestrial TV = 00 
Result = ma 00 00 0a 00
2. Tune to the digital terrestrial (DVB-T) Channel 01. 
Set ID = All = 00 
Data 00 & 01 = Channel Data is 1 = 00 01 
Data 02 = Digital Terrestrial TV = 10 
Result = ma 00 00 01 10
3. Tune to the satellite (DVB-S) Channel 1000. 
Set ID = All = 00 
Data 00 & 01 = Channel Data is 1000 = 03 E8 
Data 02 = Digital Satellite TV = 40 
Result = ma 00 03 E8 40
Ack [a][ ][Set ID][ ][OK][Data 00][Data 01]
[Data 02][x][a][ ][Set ID][ ][NG][Data 00][x]
• For South Korea, North/Latin America except 
Colombia Model
 ►To tune channel to following physical/major/minor 
number.
Transmission [m][a][ ][0][ ][Data00][ ][Data01]
[ ][Data02][ ][Data03][ ][Data04][ ][Data05][Cr]
Digital channels have a Physical, Major, and Minor 
channel number. The Physical number is the actual 
digital channel number, the Major is the number that 
the channel should be mapped to, and the Minor is 
the sub-channel. Since the ATSC tuner automatically 
maps the channel from the Major / Minor number, 
the Physical number is not required when sending a 
command in Digital.
* Analogue Terrestrial/Cable
Data  00 : Physical Channel Number
 - Terrestrial (ATV) : 02~45 (Decimal: 2 ~ 69)
 -  Cable (CATV) : 01, 0E~7D (Decimal : 1, 14~125)
[Data 01 ~ 04]: Major/Minor Channel Number
Data  01 & 02: xx (Don't care)
Data 03 & 04: xx (Don't care)
Data 05: Input Source (Analogue)
 - 00 : Terrestrial TV (ATV)
 - 01 : Cable TV (CATV)
* Digital Terrestrial/Cable
Data  00 : xx (Don't care)
[Data 01][Data 02]: Major Channel Number
Data 01 : High byte Channel Data
Data 02 : Low byte Channel Data
 - 00 01 ~ 27 0F (Decimal: 1 ~ 9999)
[Data 03][Data 04]: Minor Channel Number
Data  03 : High byte Channel Data
Data 04 : Low byte Channel Data
Data 05 : Input Source (Digital)
 - 02 :   
Terrestrial TV (DTV) – Use Physical Channel 
Number
 - 06 :   Cable TV (CADTV) – Use Physical Channel 
Number
 - 22 :   
Terrestrial TV (DTV) – Don’t Use Physical 
Channel Number
 - 26 :   Cable TV (CADTV) - Don’t Use Physical 
Channel Number
 - 46 :   Cable TV (CADTV) – Use Major Channel 
Number Only (One Part Channel)
Two bytes are available for each major and minor 
channel data, but usually the low byte is used alone 
(high byte is 0). 
* Tune Command Examples:
1.  Tune to the analogue cable (NTSC) channel 35. 
Set ID = All = 00 
Data 00 = Channel Data is 35 = 23 
Data 01 & 02 = No Major = 00 00 
Data 03 & 04 = No Minor = 00 00 
Data 05 = Analogue Cable TV = 01 
Total = ma 00 23 00 00 00 00 01
2.  Tune to the digital terrestrial (ATSC) channel 30-3. 
Set ID = All = 00 
Data 00 = Don’t know Physical = 00 
Data 01 & 02 = Major is 30 = 00 1E 
Data 03 & 04 = Minor is 3 = 00 03 
Data 05 = Digital Terrestrial TV = 22 
Total = ma 00 00 00 1E 00 03 22
Ack [a][ ][Set ID][ ][OK][Data 00][Data 01]
[Data 02][Data 03][Data 04][Data 05]
[x][a][ ][Set ID][ ][NG][Data 00][x]
• For Japan Model
 ►To tune channel to following physical/major/minor 
number.
Transmission [m][a][ ][0][ ][Data00][ ][Data01]
[ ][Data02][ ][Data03][ ][Data04][ ][Data05][Cr]
* Digital Terrestrial/Satellite
Data 00: xx (Don't care)  
						

							10
ENG
ENGLISH
10EXTERNAL CONTROL DEVICE SETUP
[Data 01][Data 02]: Major Channel Number
Data 01: High byte Channel Data
Data 02: Low byte Channel Data
 - 00 01 ~ 27 0F (Decimal: 1 ~ 9999)
[Data 03][Data 04]:   Minor/Branch Channel Number 
(Don’t care in Satellite)
Data 03: High byte Channel Data
Data 04: Low byte Channel Data
Data 05 : Input Source (Digital/Satellite for Japan)
 - 02 : Terrestrial TV (DTV)
 - 07 : BS (Broadcasting Satellite)
 - 08 : CS1 (Communication Satellite 1)
 - 09 : CS2 (Communication Satellite 2)
* Tune Command Examples:
1 Tune to the digital terrestrial (ISDB-T) channel 17-1.
Set ID = All = 00 
Data 00 = Don’t know Physical = 00 
Data 01 & 02 = Major is 17 = 00 11 
Data 03 & 04 = Minor/Branch is 1 = 00 01 
Data 05 = Digital Terrestrial TV = 02 
Total = ma 00 00 00 11 00 01 02
2. Tune to the BS (ISDB-BS) channel 30. 
Set ID = All = 00 
Data 00 = Don’t know Physical = 00 
Data 01 & 02 = Major is 30 = 00 1E 
Data 03 & 04 = Don’t Care = 00 00 
Data 05 = Digital BS TV = 07
Total = ma 00 00 00 1E 00 00 07
* This feature is varied based on the model.
Ack [a][ ][Set ID][ ][OK][Data 00][Data 01]
[Data 02][Data 03][Data 04][Data 05]
[x][a][ ][Set ID][ ][NG][Data 00][x]
18.  Channel(Programme) Add/Del(Skip) 
(Command: m b)
 ►To skip current channel(programme) for next time.
Transmission [m][b][ ][Set ID][ ][Data][Cr]
Data 00 : Del(ATSC,ISDB)/Skip(DVB)01 : Add
Ack [b][ ][Set ID][ ][OK/NG][Data][x]
* Set the saved channel status to del(ATSC, ISDB)/ 
skip(DVB) or add.
19. Key (Command: m c)
 ►To send IR remote key code.
Transmission [m][c][ ][Set ID][ ][Data][Cr]
Data  Key code - p.2.
Ack [c][ ][Set ID][ ][OK/NG][Data][x]
20. Control Back Light (Command: m g)
• For LCD TV / LED TV
 ►To control the back light.
Transmission [m][g][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [g][ ][Set ID][ ][OK/NG][Data][x]
 Control Panel Light (Command: m g)
• For Plasma TV
 ►To control the panel light.
Transmission [m][g][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [g][ ][Set ID][ ][OK/NG][Data][x]
21. Input select (Command: x b) 
(Main Picture Input)
 ►To select input source for main picture.
Transmission [x][b][ ][Set ID][ ][Data][Cr]
Data 
 00 :   DTV
 02 :   Satellite DTV 
ISDB-BS (Japan)
 03 : ISDB-CS1 (Japan)
 04 : ISDB-CS2 (Japan)
 11 : CATV
01 : CADTV
10 : ATV
 20 : AV or AV121 : AV2
 40 : Component141 : Component2
 90 : HDMI1
 92 : HDMI3
91 : HDMI2
93 : HDMI4
Ack [b][ ][Set ID][ ][OK/NG][Data][x]
* This function depends on model and signal.