LG 55LA8600, 60LA8600 Led Tv Owners Manual

							ENGLISH
31MAGIC REMOTE CONTROL FUNCTIONS
Registering Magic Remote Control
The Magic Remote Control operates by pairing with your 
TV. 
Please register the remote as follows.
How to register the Magic Remote Control
(Wheel)To register automatically, turn the TV 
on and press the 
 
Wheel (OK) . When 
registration is completed, the completion 
message appears on the screen.
If registration fails, turn the TV off and 
back on, then press the 
  Wheel (OK)  to 
complete registration.
 
How to Re-register the Magic Remote Control
BACK
SMART
1 Press and hold the   BACK  and 
SMART   buttons together for 5 
seconds to reset, then register it by 
following “How to register the Magic 
remote control” above.
2 To re-register the Magic remote control,  press and hold the 
 BACK  button for 5 
seconds toward the TV.
How to use Magic Remote Control
1 You can move the pointer by aiming the  Pointer Receiver of the remote control 
at your TV then move it left, right, up or 
down.
 
»
If the pointer does not work properly 
leave the remote control for 10 seconds 
then use it again.
2 If the pointer disappears, move the  remote control slightly to left or right. 
Then, it will automatically appear on the 
screen.
 
»
If the pointer has not been used for a 
certain period of time, it will disappear.
1
If you press   Wheel (OK)  on the Magic 
remote control, the screen appears. 
Shows information about the current program 
and screen.
2You can select My Apps Menu.
Precautions to Take when Using 
the Magic Remote Control
 
y Use the Magic remote control within the maximum 
communication distance (10 m, 32.8ft). Using the 
remote control beyond this distance, or with an object 
obstructing it, may cause a communication failure.
 
y A communication failure may occur due to nearby 
devices. Electrical devices such as a microwave oven 
or wireless LAN product may cause interference, as 
these use the same bandwidth (2.4 GHz) as the Magic 
remote control.
 
y The Magic remote control may be damaged or may 
malfunction if it is dropped or receives a heavy impact.
 
y Take care not to bump into nearby furniture or other 
people when using the Magic remote control.
 
y Manufacturer and installer cannot provide service 
related to human safety as the applicable wireless 
device has possibility of electric wave interference.
 
y It is recommended that an Access Point (AP) be 
located more than 1 m (3.28 ft) away from the TV. If 
the AP is installed closer than 1 m (3.28 ft), the Magic 
remote control may not perform as expected due to 
frequency interference.   
						

							ENGLISH
32WATCHING TV
WATCHING TV
Turning the TV on for the first time
When you turn the TV on for the first time, the Initial 
setting screen appears. Select a language and customize 
the basic settings.
1 Connect the power cord to a power outlet.
2 In Standby mode, press the power button on the 
remote control to turn the TV on. 
The Initial setting screen appears if you turn the TV 
on for the first time.
 
y You can also access 
Initial Setting by accessing 
OPTION  in the main menu.
 NOTE
3 
Follow the on-screen instructions to customize your 
TV settings according to your preferences.
Language SelectionSelects a language to 
display.

Environment SelectionSelect 
Home for the home 
environment.

Time Zone SettingSelects the time zone and 
daylight saving. 
(Depending on country)

Auto Energy Saving  modeSelect Auto Energy Saving
mode.

Network ConnectionSets your network to enable 
network-related features on 
the TV.

Select TV watching  TypeSet the TV and set-top box 
for each watching type. 
(Depending on country)

Auto TuningScans and saves available 
channels automatically.

Using camera and microphoneTo use voice and gesture 
recognition feature, lift up 
the built-in camera.
(Depending on country)

Setting is completeConfirms the setting options.

Experience Magic 
Remote ControlSimple guide of Magic 
Remote Control 
(Depending on model)
 
y Select 
Home when prompted. 
Store mode puts 
the TV in demo mode.
 
y If you select 
Store, the any customized settings 
will switch back to the default settings of  Store 
in 5 minutes.
 
y The Standby light feature is disabled in Store 
Demo mode.
 NOTE
4 
When the basic settings are complete, 
press the  
 
Wheel (OK) .
 
y If you do not complete the Initial setting, it will 
appear whenever the TV turns on.
 
y Disconnect the power cord from the power 
outlet when you do not use the TV for a long 
period of time.
 NOTE
5 
To turn the TV off, press the power button on the 
remote control.   
						

							ENGLISH
33USING THE USER GUIDE
USING THE USER GUIdE
User Guide allows you to easily access detailed TV 
information.
1  Press SMART  button to access the Smart Home 
menus.
2  Select  User Guide  and press the  Wheel (OK) 
button.
User Guide

To use input device
To set time options
To set language
To set caption
To set Magic remote control
To set TV lock options
User Guide
IndexOnline User Guide
OPTION CHANNEL Setting
PICTURE, SOUND Setting
LG SMART Function
Advanced Function
Information
1
2345
1Shows the video you were watching.
2Guide categories.
3List of topics in the current category.
You can use  /  button to move between 
pages.
4An index of key words present in the User 
Guide.
5
Provides the detailed information on the 
functions of LG Smart TV when the Internet is 
connected.
(It may not be available depending on the 
country/language.)
OPTION > To set language
SMART   Settings  OPTION  Language
Selects Menu Language and Audio Language displayed on the screen.
Menu 
Language
Audio 
Language Selects a screen menu language.
[In Digital Mode Only]
Selects the desired language when watching digital
broadcasting containing several audio languages
Voice
Recognition Language Select the language to make voice search
0729  Only the voice search adopted model support this
setting.Try Now
Close
1
2
1Shows the description of the selected menu. 
You can use  /  to move between pages.
2Moves to the selected menu directly from the 
User Guide.
(Depending on country)
To set other options
IndexOnline User Guide 
						

							ENGLISH
34SPECIFICATIONS
SPECIFICATIONS
Product specifications may be changed without prior notice due to upgrad\
e of product functions.
Power requirementAC 100 - 240 V ~ 50 / 60 Hz
Television SystemNTSC-M, ATSC, 64 & 256 QAM
Program CoverageVHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135
External Antenna Impedance75 Ω
Environment
condition
Operating Temperature0 °C ~ 40 °C (32 °F ~ 104 °F)
Operating Humidity Less than 80 %
Storage Temperature -20 °C ~ 60 °C (-4 °F ~ 140 °F)
Storage Humidity Less than 85 %
MODELS 55LA8600 
(55LA8600-UC)
Dimensions
(W x H x D) With stand
1,229 x 788 x 316 (mm)
48.3 x 31.0 x 12.4 (inch)
Without stand 1,229 x 721 x 35.1 (mm)
48.3 x 28.3 x 1.3 (inch)
Weight With stand
26.2 Kg (57.7 Ibs)
Without stand 23.4 Kg (51.5 Ibs)
Current Value / Power consumption 1.5 A / 150 W
MODELS60LA8600 
(60LA8600-UC)
Dimensions
(W x H x D) With stand
1,338 x 850 x 316 (mm)
52.6 x 33.4 x 12.4 (inch)
Without stand 1,338 x 782 x 35.1 (mm)
52.6 x 30.7 x 1.3 (inch)
Weight With stand
30.5 Kg (67.2 Ibs)
Without stand 27.7 Kg (61.0 Ibs)
Current Value / Power consumption 1.7 A / 170 W   
						

							ENGLISH
35SPECIFICATIONS
HDMI (DTV) supported mode
ResolutionHorizontal 
Frequency (kHz) Vertical Frequency 
(Hz)
720 x 480 31.469
31.5059.94
60.00
1280 x 720 44.96
45.0059.94
60.00
1920 x 1080 33.72
33.75
26.97
27.000
33.716
33.75
67.43
67.50059.94
60.00
23.97
24.000
29.976
30.00
59.94
60
Component supported mode
Resolution
Horizontal 
Frequency (kHz) Vertical Frequency 
(Hz)
720 x 480i 15.73
15.7359.94
60.00
720 x 480p 31.47
31.5059.94
60
1280 x 720p 44.96
45.0059.94
60.00
1920 x 1080i 33.72
33.7559.94
60.00
1920 x 1080p 26.97
27.00
33.71
33.75
67.432
67.50023.976
24.00
29.97
30.00
59.94
60.00
Component port connecting information
Component ports on the
TV Y
PB PR
Video output ports on DVD player Y
PB PR
Y B-Y R-Y
Y Cb Cr
Y Pb Pr
HDMI (PC) supported mode
Resolution Horizontal 
Frequency (kHz) Vertical Frequency 
(Hz)
640 x 480 31.469 59.94
800 x 600  37.87960.31
1024 x 768 48.36360.00
1152 x 864 54.34860.053
1360 x 768 47.71260.015
1280 x 1024 63.98160.020
1920 x 1080 67.560.00
Wireless LAN module (WN8122E1) specification
StandardIEEE802.11a/b/g/n
Frequency Range 2400 to 2483.5 MHz
5150 to 5250 MHz
5725 to 5850 MHz
Output Powe r (Max.) 802.11a: 16.5 dBm
802.11b: 16 dBm
802.11g: 15.5 dBm
802.11n - 2.4GHz: 15.5 dBm
802.11n - 5GHz: 16.5 dBm
 
y Because band channel used by the country could 
be different, the user can not change or adjust the 
operating frequency and this product is set for the 
regional frequency table.
 
y Contains FCC ID: BEJWN8122E1 
Contains IC: 2703H-WN8122E1
Bluetooth module (BM-LDS401) specification 
Standard
Bluetooth Version 3.0
Frequency Range 2400 ~ 2483.5 MHz
Output Power (Max.) 10 dBm or lower
 
y Contains FCC ID: BEJLDS401  
Contains IC: 2703H-LDS401   
						

							ENGLISH
36SPECIFICATIONS
3D supported mode 
 
y Video, which is input as below media contents is switched into the 3D sc\
reen automatically.
3D supported mode automatically
Input Signal Horizontal 
Frequency (kHz) Vertical 
Frequency (Hz) Playable 3D video format
HDMI 1080p
54.00
24
F/P, L/A
67.50 30
27.00 24
S/S, T&B, S/S Full
33.75 30
67.50 60 S/S, T&B
1080i 67.50
60 F/P, F/A
33.75 S/S, T&B, S/S Full
720p 90.00
F/P, L/A
45.00 S/S, T&B, S/S Full
480p 63.00
F/P, L/A
31.50 T/B, S/S, S/S Full
USB 1080p 33.75  30 S/S, T&B, C/B, MPO(Photo)
DLNA
S/S : Side by Side, S/S Full : Side by Side Full, S/S Half :Side by Side\
 Half,
T/B : Top & Bottom, F/P : Frame Packing, F/A : Field Alternative, L/A : \
Line Alternative, C/B : Checker Board,
R/I : Row Interleaving, C/I: Column Interleaving, F/S : Single Frame Seq\
uential   
						

							ENGLISH
37SPECIFICATIONS / EXTERNAL CONTROL DEVICE SETUP
3D supported mode manually
Input Signal Playable 3D video format
TV -
2D to 3D, S/S, T&B
ATV(CVBS) -
Component -
HDMI-PC 1080p
2D to 3D, S/S, T&B, C/B, R/I, C/I
(60Hz : F/S)
Others 2D to 3D, S/S, T&B
HDMI-DTV Interlace
2D to 3D, S/S, T&B
Progressive 2D to 3D, S/S, T&B, C/B, R/I, C/I
(60Hz : F/S )
USB / DLNA  (Movie) 704 x 480p (Over)
2D to 3D, S/S, T&B, C/B, R/I, C/I
(60Hz : F/S )
704 x 480i (Over) 2D to 3D, S/S, T&B
704 x 480 (Under) 2D to 3D
USB / DLNA  (Photo) 320 x 240 (Over) 
2D to 3D, S/S, T&B
320 x 240 (Under) 2D to 3D
Miracast™ /  WiDi 1024 x 768p
2D to 3D, S/S, T&B
1280 x 720p
1920 x 1080p Others 2D to 3D
ExTERNAL CONTROL dEVICE SETUP
To obtain the external control device setup information, please visit ‘\
www.lg.com’.   
						

							ENGLISH
38MAINTENANCE / TROUBLESHOOTING
MAINTENANCE
Cleaning Your TV
Clean your TV regularly to keep it at peak performance and to extend the\
 product lifespan. 
y Before Cleaning, turn the power off and disconnect the power cord and al\
l other cables.
 
y When the TV is left unattended or unused for a long time, disconnect the\
 power cord from the wall outlet to 
prevent possible damage from lightning or power surges.
 CAUTION
Screen, frame, cabinet and stand
To remove dust or light dirt, wipe the surface with a dry, clean, and so\
ft cloth. 
To remove major dirt, wipe the surface with a soft cloth dampened in cle\
an water or a diluted mild detergent. Then wipe 
immediately with a dry cloth.
 
y Do not push, rub, or hit the surface with your fingernail or a sharp obj\
ect, as this may result in scratches on the 
screen and image distortions.
 
y Do not use any chemicals, such as waxes, benzene, alcohol, thinners, ins\
ecticides, air fresheners, lubricants, as 
these may damage the screen’s finish and cause discoloration.
 
y Do not spray liquid onto the surface. If water enters the TV, it may res\
ult in fire, electric shock, or malfunction.
 CAUTION
Power cord
Remove the accumulated dust or dirt on the power cord regularly.
TROUBLESHOOTING
Problem
Solution
Cannot control the TV with the remote 
control.  
y Check the remote control sensor on the product and try again.
 
y Check if there is any obstacle between the product and the remote contro\
l.
 
y Check if the batteries are still working and properly installed (
 to ,  to ).
No image display and no sound is 
produced.  
y Check if the product is turned on.
 
y Check if the power cord is connected to a wall outlet.
 
y Check if there is a problem in the wall outlet by connecting other produ\
cts.
The TV turns off suddenly.  
y Check the power control settings. The power supply may be interrupted.
 
y Check if the Auto sleep feature is activated in the Time settings. 
 
y If there is no signal while the TV is on, the TV will turn off automatic\
ally after 15 minutes of 
inactivity.   
						

							CHILD SAFETY: 
It Makes A Difference How and Where You Use Your Flat Panel Display
Congratulations  on  your  purchase!  As  you  enjoy  your  new  product, 
please keep these safety tips in mind:
THE ISSUE
 
y The  home  theater  entertainment  experience  is  a  growing  trend  and 
larger  flat  panel  displays  are  popular  purchases.  However,  flat  panel 
displays  are  not  always  supported  on  the  proper  stands  or  installed 
according to the manufacturer’s recommendations.
 
y F l a t   p a n e l   d i s p l a y s   t h a t   a r e   i n a p p r o p r i a t e l y   s i t u a t e d   o n   d r e s s e r s , 
bookcases,  shelves,  desks,  speakers,  chests  or  carts  may  fall  over  and 
cause injury.
THIS MANUFACURER CARES!
 
y The  consumer  electronics  industry  is  committed  to  making  home 
entertainment enjoyable and safe.
TUNE INTO SAFETY
 
y O n e   s i z e   d o e s   N O T   f i t   a l l .   F o l l o w   t h e   m a n u f a c t u r e r ’ s 
recommendations  for  the  safe  installation  and  use  of  your  flat  panel 
display.
 
y Carefully read and understand all enclosed instructions for proper use 
of this product.
 
y Don’t  allow  children  to  climb  on  or  play  with  furniture  and  television 
sets.
 
y Don’t  allow  place  flat  panel  displays  on  furniture  that  can  easily  be 
used as steps, such as a chest of drawers.
 
y R e m e m b e r   t h a t   c h i l d r e n   c a n   b e c o m e   e x c i t e d   w h i l e   w a t c h i n g 
a  program,  especially  on  a  “larger  than  life”  flat  panel  display. 
 
Care should be taken to place or install the display where it cannot be 
pushed, pulled over, or knocked down.
 
y Care  should  be  taken  to  route  all  cords  and  cables  connected  to  the 
flat panel display so that they cannot be pulled or grabbed by curious 
children.
WALL MOUNTING: 
IF YOU DECIDE TO WALL MOUNT 
YOUR FLAT PANEL DISPLAY, ALWAYS:
 
y U s e   a   m o u n t   t h a t   h a s   b e e n   r e c o m m e n d e d   b y   t h e   d i s p l a y 
m a n u f a c t u r e r   a n d / o r   l i s t e d   b y   a n   i n d e p e n d e n t   l a b o r a t o r y 
 
(such as UL, CSA, ETL).
 
y Follow  all  instructions  supplied  by  the  display  and  wall  mount 
manufacturers.
 
y If  you  have  any  doubts  about  your  ability  to  safely  install  your  flat 
panel display, contact your retailer about professional installation.
 
y Make  sure  that  the  wall  where  you  are  mounting  the  display  is 
appropriate.  Some  wall  mounts  are  not  designed  to  be  mounted 
t o   w a l l s   w i t h   s t e e l   s t u d s   o r   o l d   c i n d e r   b l o c k   c o n s t r u c t i o n . 
 
If you are unsure, contact a professional installer.
 
y A   m i n i m u m   o f   t w o   p e o p l e   a r e   r e q u i r e d   f o r   i n s t a l l a t i o n . 
 
Flat panel displays can be heavy 
						

							The model and serial number of the TV is located 
on the back and one side of the TV. 
Record it below should you ever need service.
MODEL 
SERIAL 
LG Customer Information Center
For inquires or comments, visit www.lg.com or call;
1-800-243-0000USA, Consumer User
1-888-865-3026USA, Commercial User
1-888-542-2623CANADA
Register your product Online!www.lg.com
This product qualifies for ENERGY STAR in the 
“factory default (Home Use)” setting.
Changing the factory default settings or enabling 
other features may increase power consumption 
that could exceed the limits necessary to quality for 
ENERGY STAR.