LG 55LA8600, 60LA8600 Led Tv Owners Manual

							ENGLISH
21MAKING CONNECTIONS
Connecting to a HD receiver, DVD Player or VCR
Connect a HD receiver, DVD Player, or VCR to the TV and select an approp\
riate input mode.
HDMI Connection
HDMI is the best way to connect a device.
Transmits digital video and audio signals from an external device to the\
 TV. Connect the external device and the TV with 
the HDMI cable as shown in the following illustration.
Choose any HDMI input port to connect. 
It does not matter which port you use.
ARC (Audio Return Channel) 
y When connected with a high-speed HDMI 
cable, digital audio can be sent to a compactible 
device without an additional optical audio cable.
 
y ARC is only supported on the HDMI input 
1 (ARC) port. An external audio device that 
supports ARC should be connected to HDMI 1 
if you wish to use ARC.
 
y Use the latest High Speed HDMI™ Cable that supports CEC (Customer El\
ectronics Control) function. 
 
y High Speed HDMI™ Cables are tested to carry an HD signal up to 1080p \
and higher.
 
y HDMI Audio Supported Format: PCM (Up to 192 kHz, 32 kHz / 44.1 kHz / 48\
 kHz / 88 kHz / 96 kHz / 176 kHz  
/ 192 kHz).
 NOTE
HDMI
DVD / Blu-Ray / HD Cable Box / HD STB
(*Not Provided)   
						

							ENGLISH
22MAKING CONNECTIONS
DVI to HDMI Connection
Transmits the digital video signal from an external device to the TV. Co\
nnect the external device and the TV with the 
DVI-HDMI cable as shown in the following illustration. To transmit an au\
dio signal, connect an audio cable.Choose any HDMI input port to connect. 
It does not matter which port you use. 
y When using the HDMI/DVI cable, Single link is only supported.
 NOTE
AUDIO OUTDVI OUT
(*Not Provided)
(*Not Provided) DVD / Blu-Ray / HD Cable Box
YELLOW   
						

							ENGLISH
23MAKING CONNECTIONS
DVD / Blu-Ray / HD Cable Box
Connecting to a mobile phone
Mobile High-definition Link (MHL) is an interface for transmitting dig\
ital audio/visual signals from mobile phones to 
television sets. 
y Connect the mobile phone to the HDMI IN 4 (MHL) port to view the phone\
 screen on the TV.
 
y This only works with an MHL-enabled phone.
 
y With some MHL supporting mobile phones, you can use the TV remote to con\
trol the phone.  
 
y An MHL passive cable is needed to connect the TV and a mobile phone.
 
y Remove the MHL cable from the TV when:  
- the MHL function is disabled 
- your mobile device is fully charged in standby mode
 NOTE
4 
(MHL) 
(*Not Pr
ovided)
MHL Cable
Mobile phone   
						

							ENGLISH
24MAKING CONNECTIONS
Component Connection
Transmits analog video and audio signals from an external device to the \
TV. Connect the external device and the TV with 
a component cable as shown in the following illustration. 
y If cables are installed incorrectly, it could cause the image to display\
 in black and white or with distorted color.
 
y Check to ensure the cables are matched with the corresponding color conn\
ection.
 NOTE
INCOMPONENTAV
VIDEO
AUDIOYPBPR
VIDEOAUDIO
LR
DVD / Blu-Ray / HD Cable Box
GREEN
BLUE
RED RED
WHITE
GREEN
YELLOW
YELLOW WHITE REDGREEN
BLUE
RED
WHITE RED GREEN
BLUE
RED
(Use the composite video cable provided.) (Use the component video cable provided.)   
						

							ENGLISH
25MAKING CONNECTIONS
Composite Connection
Transmits analog video and audio signals from an external device to the \
TV. Connect the external device and the TV with 
the composite cable as shown in the following illustration.
INCOMPONENTAV
VIDEOAUDIOYPBPR
VIDEOMONO()AUDIO
L R
VC R   /   DVD / Blu-Ray / HD Cable Box
RED
WHITE
YELLOW WHITE RED
WHITE RED
YELLOW YELLOW
YELLOW
(Use the composite video cable provided.)
 
y If you have a mono VCR, connect the audio cable from the VCR to the AUDI\
O L/MONO jack of the TV.
 
y Check to ensure the cables are matched with the corresponding color conn\
ection.
 NOTE   
						

							ENGLISH
26MAKING CONNECTIONS
Connecting a PC
 
y It is recommended to use an HDMI connection for the best image quality.
 
y Depending on the graphics card, DOS mode video may not work if a HDMI to\
 DVI Cable is in use.
 
y In PC mode, there may be noise associated with the resolution, vertical patter\
n, contrast or brightness. If noise 
is present, change the PC output to another resolution, change the refre\
sh rate to another rate or adjust the 
brightness and contrast on the PICTURE menu until the picture is clear.
 
y The synchronization input form for Horizontal and Vertical frequencies i\
s separate.
 
y Depending on the graphics card, some resolution settings may not allow t\
he image to be positioned on the screen 
properly.
 
y If you are using DVI out from a PC, you have to connect analog audio sep\
arately. Refer to the instructions on the 
next page.
 
y When using the HDMI/DVI cable, Single link is only supported.
 NOTE
HDMI Connection or DVI to HDMI Connection
Choose method A or B to make connection.
Method A: HdMI Connection
AUDIO OUT
DVI OUT
HDMI
(*Not Provided)
PC
Choose any HDMI input port to connect. 
It does not matter which port you use.   
						

							ENGLISH
27MAKING CONNECTIONS
Method B: dVI to HdMI Connection
AUDIO OUT
DVI OUT
HDMI
PC
(*Not Provided) (*Not Provided)
YELLOW
Choose any HDMI input port to connect.
It does not matter which port you use.   
						

							ENGLISH
28MAKING CONNECTIONS
Connecting to an Audio System
You can use an optional external audio system instead of the built-in sp\
eaker.
Digital Optical Audio Connection
Transmits a digital audio signal from the TV to an external device. Conn\
ect the external device and the TV with the 
optical audio cable as shown in the following illustration.
 NOTE
 
y   Do not look into the optical output port. Looking at the laser beam may \
damage your vision.
 
y Audio with ACP (Audio Copy Protection) function may block digital audi\
o output.
OPTICAL AUDIO IN
Digital Audio System
(*Not Provided)   
						

							ENGLISH
29MAKING CONNECTIONS
Connecting to an Audio System
You can use an optional external audio system instead of the built-in sp\
eaker.
Digital Optical Audio Connection
Transmits a digital audio signal from the TV to an external device. Conn\
ect the external device and the TV with the 
optical audio cable as shown in the following illustration.
 NOTE
 
y   Do not look into the optical output port. Looking at the laser beam may \
damage your vision.
 
y Audio with ACP (Audio Copy Protection) function may block digital audi\
o output.
 
y AUDIO menu options are disabled when using headphones.
 
y When changing AV MODE with headphones connected, the change is applied t\
o video but not to audio.
 
y Optical Digital Audio Out is not available when headphones are connected\
.
 
y Headphone impedance: 16 
Ω
 
y Max audio output: 0.6 mW to 1.3 mW
 
y Headphone jack size: 0.35 cm (0.13 inches) 
 NOTE
Connecting Headphones 
Listening to sound with headphones
Headphone
(*Not Provided)
Connecting a USB Device
Connect a USB storage device such as USB flash memory, external hard dri\
ve, or a USB memory card reader to the TV 
and access the Smart Share menu to use various multimedia files.
Choose any USB input port to connect. 
It does not matter which port you use.  
y Some USB Hubs may not work. If a USB device connected using a USB Hub is\
 not detected, connect it to the 
USB port on the TV directly.
 NOTE
3(1A)
3.0
(*Not Provided)
USB / USB HUB / HDD   
						

							ENGLISH
30MAGIC REMOTE CONTROL FUNCTIONS
MAGIC REMOTE CONTROL FUNCTIONS
When the message “Magic remote control battery is low. Change the bat\
tery.” is displayed, 
replace the battery. To install batteries, open the battery cover, repla\
ce batteries (1.5 V AA) 
matching 
 and  ends to the label inside the compartment, and close the battery cover. \
Be sure to point the remote control at the remote control sensor on the \
TV. To remove the 
batteries, perform the installation actions in reverse.
 
y Do not mix old and new batteries, as this may damage the remote control.\
 CAUTION
This remote uses infrared light. When in use, it should be pointed in th\
e direction of the TV’s remote sensor.
VOLCH
 
/Q.MENU
Accesses the Universal Control 
(Depending on country)
Accesses the quick menus.
  Wheel(OK)
Selects menus or options and confirms 
your input. 
Scrolls through the saved programmes. 
If you press the navigation button while 
moving the pointer on the screen, 
the pointer disappears, and the Magic 
Remote Control works as a regular 
remote control. 
To display the pointer again, shake the 
Magic Remote Control from side to 
side.
 (POWER) 
Turns the TV on or off.
Used for viewing 3D video.
 BACK 
Returns to the previous level.
  CH  Scrolls through the saved programmes 
or channels.
Navigation buttons 
(up/down/left/right) 
Scrolls through menus or options.
 MUTE
Mutes all sounds.
 VOL Adjusts the volume level.
 Voice recognition
-This is a beta version and only available 
in selected functions for supported  models. 
-Network connection is required to use  the voice recognition function.
1. Press the Voice recognition button. 2. Speak slowly and precisely.   
When a voice is recognized, the 
processing message appears on the  screen.
• Use the magic remote control no  further than 10 cm from your face.
SMART  
Accesses the Smart Home.
Pointer (RF transmitter)
 LIGHTING ON/OFF
Turns the light on and off.
If you set it to ON, the light 
automatically turns off in 5 seconds