LG 55LA8600, 60LA8600 Led Tv Owners Manual

							ENGLISH
11ASSEMBLING AND PREPARING
Optional Extras
Optional extras can be changed or modified for quality improvement witho\
ut any notification.
Contact your dealer to buy these items.
These devices only work with certain models.
The model name or design may be changed manufacturer’s circumstances \
or policies.
AN-MR400
Magic RemoteAG-F***
Cinema 3D GlassesAG-F***DP
Dual Play Glasses
Ta
g On
LG Audio device Tag OnAN-BL***
Wireless IR Blaster 
(Depending on model)   
						

							ENGLISH
12ASSEMBLING AND PREPARING
Parts and Buttons
SETTINGS
INPUT
OK
Logo light
Buttons
Screen
ButtonDescription
 /  ( / )
Scrolls through the saved channels.
 /  ( / )Adjusts the volume level.
 (
OK  ) Selects the highlighted menu option or confirms an input.
 (
SETTINGS ) Accesses the main menus, or saves your input and exits the menus.
 (
INPUT ) Changes the input source.
 () Turns the power on or off.
1.Intelligent sensor - Adjusts the image quality and brightness based on\
 the surrounding environment. R
emote control and 
Intellgent sensors.
1
Video call camera
Speakers   
						

							ENGLISH
13ASSEMBLING AND PREPARING
Lifting and moving the TV
When moving or lifting the TV, read the following to 
prevent the TV from being scratched or damaged and for 
safe transportation regardless of its type and size. 
y Avoid touching the screen at all times, as this may 
result in damage to the screen.
 CAUTION
 
y Hold the top and bottom of the TV frame firmly. 
Make sure not to hold the transparent part, speaker, 
or speaker grill area.
 
y It is recommended to move the TV in the box or 
packing material that the TV originally came in.
 
y Before moving or lifting the TV, disconnect the 
power cord and all cables.
 
y When holding the TV, the screen should face away 
from you to avoid damage.  
y When transporting a large TV, there should be at 
least 2 people.
 
y When transporting the TV by hand, hold the TV as 
shown in the following illustration.
 
y When transporting the TV, do not expose the TV to 
jolts or excessive vibration.
 
y When transporting the TV, keep the TV upright, 
never turn the TV on its side or tilt towards the left 
or right.   
						

							ENGLISH
14ASSEMBLING AND PREPARING
Setting up the TV
You can mount your TV to a wall or attach the stand if you wish to place\
 the TV on an entertainment center or other
furniture.
Attaching the stand
If you are not mounting the TV to a wall, use the following instructions\
 to attach the stand. 
y When attaching the stand to the TV set, place the screen facing down on \
a cushioned table or flat surface to 
protect the screen from scratches.
 
y Make sure that the screws are fastened tightly. (If they are not fasten\
ed securely enough, the TV may tilt forward 
after being installed.)
 
y Do not tighten the screws with too much force; otherwise they may be dam\
aged and come loose later.
 CAUTION
 
y Remove the stand before installing the TV on a wall mount by performing \
the stand attachment in reverse.
 NOTE
41
2
M4 x 16
2 EAM4 x 16
2 EA
Stand Base
Wrapping bag  
(Depending on model)
3
Front   
						

							ENGLISH
15ASSEMBLING AND PREPARING
Mounting on a table
1
 Lift and tilt the TV into its upright position on a table.
- Leave a 
10 cm (4 inch) (minimum) space from 
the wall for proper ventilation.
10 cm
10 cm
10 cm
10 cm
2 
Connect the power cord to a wall outlet.
 
y Do not place the TV near or on sources of heat, as 
this may result in fire or other damage.
 CAUTION
(
4  
i n c
h e
s)
Adjusting the angle of the TV to suit view
Swivel 8 degrees to the left or right and adjust the angle 
of the TV to suit your view. 
8
8
 
y Install the product on a flat surface for easy swivel. 
Make sure to use the TV cabinet or stand that can 
properly support the TV.
 
y After installing the TV, the angle of the screen can 
be adjusted to the left or right. 
 
y When adjusting the angle, make sure there are 
no objects near the TV and the TV has enough 
distance from the wall. A space of at least 5 cm 
on the front and 10 cm on the back should be 
available. Otherwise, the product could fall due to 
balance problems, which may cause personal injury 
or damage to the product. 
 CAUTION   
						

							ENGLISH
16ASSEMBLING AND PREPARING
Securing the TV to a wall (optional)
(Depending on model)
1 Insert and tighten the eye-bolts, or TV brackets and 
bolts on the back of the TV. 
-  If there are bolts inserted at the eye-bolts position, 
remove the bolts first.
2  Mount the wall brackets with the bolts to the wall.
Match the location of the wall bracket and the eye-
bolts on the rear of the TV.
3 Connect the eye-bolts and wall brackets tightly with 
a sturdy rope. 
Make sure to keep the rope horizontal with the flat 
surface.
 
y Make sure that children do not climb on or hang on 
the TV.
 CAUTION
 
y Use a platform or cabinet that is strong and large 
enough to support the TV securely.
 
y Brackets, bolts and ropes are optional. You can 
obtain additional accessories from your local dealer.
 NOTE
Tidying cables
1
 
Gather and bind the cables with the cable holder on 
the back of the TV.
Cable Holder
2 Gather and bind the cables with the cable 
management clip.
Cable Management Clip
 
y Do not move the TV by holding the cable holder 
and cable management clip, as the cable holders 
may break, and injuries and damage to the TV may 
occur.
 CAUTION   
						

							ENGLISH
17ASSEMBLING AND PREPARING
Tidying cables
1
 Gather and bind the cables with the cable holder on 
the back of the TV.
2 Gather and bind the cables with the cable 
management clip.
Mounting on a wall
An optional wall mount can be used with your LG
Television. Consult with your local dealer for a wall
mount that supports the VESA standard used by your
TV model. Carefully attach the wall mount bracket at the
rear of the TV. Install the wall mount bracket on a solid
wall perpendicular to the floor. If you are attaching the
TV to other building materials, please contact qualified
personnel to install the wall mount. Detailed instructions
will be included with the wall mount. We recommend
that you use an LG brand wall mount.
10 cm
10 cm
10 cm (4 inches)
10 cm
Make sure to use screws and wall mounts that meet the 
VESA standard. Standard dimensions for the wall mount 
kits are described in the following table.
Model
55LA8600
VESA (A x B) 
AB
400 x 400
Standard screw M6
Number of screws 4
Wall mount bracket 
(optional) MSW240 
LSW430B
Model
60LA8600
VESA (A x B) 
AB
400 x 400
Standard screw M6
Number of screws 4
Wall mount bracket 
(optional) LSW430B 
Wall mount bracket (optional)
LSW430B
MSW240
 
y Disconnect the power before moving or installing 
the TV. Otherwise electric shock may occur.
 
y If you install the TV on a ceiling or slanted wall, it 
may fall and result in severe injury. 
Use an authorized LG wall mount and contact the 
local dealer or qualified personnel.
 
y Do not over tighten the screws as this may cause 
damage to the TV and void your warranty.
 
y Use the screws and wall mounts that meet the 
VESA standard. Any damages or injuries by misuse 
or using an improper accessory are not covered by 
the warranty.
 CAUTION
 
y Use the screws that are listed in the VESA 
standard screw specifications.
 
y The wall mount kit includes an installation manual 
and necessary parts.
 
y The wall mount bracket is optional. You can obtain 
additional accessories from your local dealer.
 
y The length of screws may differ depending on the 
wall mount. Make sure to use the proper length.
 
y For more information, refer to the manual supplied 
with the wall mount.
 NOTE   
						

							ENGLISH
18ASSEMBLING AND PREPARING
Using Built-in Camera
You can make a Skype video call or use the motion 
recognition function using the built-in camera of the TV.
This TV does not support the use of an external camera. 
y Before using the built-in camera, you must 
recognize the fact that you are legally responsible 
for the use or misuse of the camera by the relevant 
national laws including the criminal law.
 
y The relevant laws include the Personal Information 
Protection law which regulates the processing 
and transferring of personal information and the 
law which regulates the monitoring by camera in a 
workplace and other places.
 
y When using the built-in camera, the user must gain 
consent from the persons being observed. Please 
avoid using the camera in the following manner. 
We suggest avoiding the following situations:  
(1) Using the camera in areas where the use of 
camera is generally prohibited such as restroom, 
locker room, fitting room and security area. 
(2) Using the camera while causing the 
infringement of privacy. 
(3) Using the camera while causing the violation of 
the relevant regulations or laws.
 NOTE
Preparing Built-in Camera
1
. Pull up the slide at the back of the TV.
Slide
2 
You can adjust the angle of the camera with the 
angle adjustment lever on the back of the built-in 
camera (within 5 degrees vertically).
Angle Adjustment 
Lever
3 Pull down the built-in camera when you are not using 
it.
 
Name of Parts for the Built-In Camera
Indicator Microphone
Camera Lens
 
y Remove the protective film before using the built-
in camera.
 NOTE   
						

							ENGLISH
19ASSEMBLING AND PREPARING
2 You can adjust the angle of the camera with the 
angle adjustment lever on the back of the built-in 
camera (within 5 degrees vertically).
3 Pull down the built-in camera when you are not using 
it.
 
Name of Parts for the Built-In Camera
Microphone
 
y The optimal distance from the camera to use the 
motion recognition function is between 1.5(5 ft) 
and 4.5 m(15 ft).
 NOTE
Checking the Camera’s Shooting Range
1
 
Press the SMART button on the remote control to 
display the More menu.
2 Select Settings from the More menu and then press 
the wheel (OK) button.
3 Go to OPTION  Camera Setting Help and press 
the wheel (OK) button.   
						

							ENGLISH
20MAKING CONNECTIONS
MAKING CONNECTIONS
You can connect various external devices to the TV. Supported external d\
evices are: HD receivers, DVD players, VCRs, 
audio systems, USB storage devices, PC, gaming devices, and other extern\
al devices. For more information on external 
device’s connection, refer to the manual provided with each device. 
Connecting to an antenna or cable
Connect an antenna, cable, or cable box to watch TV while referring to t\
he following. The illustrations may differ from 
the actual items and a RF cable is optional. 
y Make sure not to bend the copper wire of the RF 
cable.
Copper wire
 
y Complete all connections between devices, and 
then connect the power cord to the power outlet 
to prevent damage to your TV.
 CAUTION
 
y If you record a TV program on a DVD recorder or VCR, make sure to connec\
t the TV signal input cable to the 
TV through a DVD recorder or VCR. For more information of recording, ref\
er to the manual provided with the 
connected device.
 
y The external device connections shown may differ slightly from illustrat\
ions in this manual.
 
y Connect external devices to the TV regardless of the order of the TV por\
t.
 
y If you connect a gaming device to the TV, use the cable supplied with th\
e gaming device.
 
y Refer to the external equipment’s manual for operating instructions.
 NOTE
 
y Use a signal splitter to use more than 2 TVs.
 
y Visit http://lgknowledgebase.com for more 
information about the antenna and cable 
connection. Search for antenna.
 
y DTV Audio Supported Codec: MPEG, Dolby Digital.
 NOTE
UHF Antenna
Antenna VHF Antenna
Coaxial (75Ω) Terminal
(*Not Provided)