Lexmark X940e User Manual
Here you can view all the pages of manual Lexmark X940e User Manual. The Lexmark manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 261
These are possible solutions. Try one or more of the following: IS A TONER CARTRIDGE DEFECTIVE? Replace the toner cartridge. IS THERE TONER IN THE PAPER PATH? Contact Customer Support. Transparency print quality is poor C HECK THE TRANSPARENCIES Use only transparencies recommended by the printer manufacturer. CHECK THE PAPER TYPE SETTING Load transparencies, and make sure the Paper Type setting is set to Transparency. Uneven print density ABCDE A BCDE A BCDE Replace the photoconductor(s). Note: The...
Page 262
What is CMYK color? Cyan, magenta, yellow, and black inks or toners can be printed in various amounts to produce a large range of colors observed in nature. For example, cyan and yellow can be combined to create green. Printing presses, inkjet printers, and color laser printers create colors in this manner. CMYK color is a method of describing colors by indicating the amount of cyan, magenta, yellow, and black needed to reproduce a particular color. How is color specified in a document to be printed?...
Page 263
Notes: Manual color correction is not useful if the software program does not specify colors with RGB or CMYK combinations. It is also not effective in situations in which the software program or the computer operating system controls the adjustment of colors. The color conversion tables—applied to each object when Color Correction is set to Auto—generate preferred colors for the majority of documents. To manually apply a different color conversion table: 1From the Quality menu, select Color Correction,...
Page 264
Selecting which Color Samples set to use for a particular color‑matching problem depends on the Color Correction setting being used (Auto, Off, or Manual), the type of object being printed (text, graphics, or images), and how the color of the object is specified in the software program (RGB or CMYK combinations). When the printer Color Correction setting is set to Off, the color is based on the print job information; and no color conversion is implemented. Note: The Color Samples pages are not useful if...
Page 265
Notices Product name: Lexmark X940e, Lexmark X945e Machine type: 7510 Model(s): 030, 230 Edition notice August 2011 The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or...
Page 266
Trademarks Lexmark and Lexmark with diamond design, MarkNet, and MarkVision are trademarks of Lexmark International, Inc., registered in the United States and/or other countries. MarkTrack and PrintCryption are trademarks of Lexmark International, Inc. PCL® is a registered trademark of the Hewlett-Packard Company. PCL is Hewlett-Packard Company’s designation of a set of printer commands (language) and functions included in its printer products. This printer is intended to be compatible with the PCL...
Page 267
Exposure to radio frequency radiation The following notice is applicable if your printer has a wireless network card installed. The radiated output power of this device is far below the FCC radio frequency exposure limits. A minimum separation of 20 cm (8 inches) must be maintained between the antenna and any persons for this device to satisfy the RF exposure requirements of the FCC. Industry Canada notices Industry Canada compliance statement This Class A digital apparatus meets all requirements of the...
Page 268
En application des réglementations dIndustry Canada, lutilisation dune antenne de gain supérieur est strictement interdite. Pour empêcher toute interférence radio au service faisant lobjet dune licence, cet appareil doit être utilisé à lintérieur et loin des fenêtres afin de garantir une protection optimale. Si le matériel (ou son antenne démission) est installé à lextérieur, il doit faire lobjet dune licence. Linstallateur de cet équipement radio doit veiller à ce que lantenne soit implantée et dirigée...
Page 269
Español Por medio de la presente, Lexmark International, Inc. declara que este producto cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. Eesti Käesolevaga kinnitab Lexmark International, Inc., et seade see toode vastab direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele muudele asjakohastele sätetele. Suomi Lexmark International, Inc. vakuuttaa täten, että tämä tuote on direktiivin 1999/5/EY oleellisten...
Page 270
permissions from any local authority, regulatory bodies or any organization, required by the end-user to install and operate this product at his premises. Noise emission levels The following measurements were made in accordance with ISO 7779 and reported in conformance with ISO 9296. Note: Some modes may not apply to your product. 1-meter average sound pressure, dBA Printing 52 dBA Scanning 54 dBA Copying 53 dBA Ready 32 dBA Values are subject to change. See www.lexmark.com for current values....