Lexmark X940e Owners Manual

Repair information4-169
 7510
Go Back Previous
Next
Sensor (document tray width 3) removal
1. Open the ADF left cover assembly.
2. Lift the document tray assembly.
3. Remove the five screws securing the cover (A).
4. Remove the cover (A).
5. Remove the two screws securing the bracket (B). 
6. Remove the bracket (B).
7. Remove the connector from the sensor (document tray width 3) (C).
8. Release the hooks securing the sensor (document tray width 3) (C).
9. Remove the sensor (document tray width 3) (C)....

4-170Service Manual 7510 
Go Back Previous
Next
Sensor (document tray length 1) removal
1. Open the ADF left cover assembly.
2. Lift the document tray assembly.
3. Remove the five screws securing the cover (A). 
4. Remove the cover (A).
5. Remove the connector from the sensor (document tray length 1) (B).
6. Release the hook securing the sensor (document tray length 1) (B).
7. Remove the sensor (document tray length 1) (B).
Note:  The sensor (document tray length 1) and the sensor (document tray length...

Repair information4-171
 7510
Go Back Previous
Next
Sensor (document tray length 2) removal
1. Open the ADF left cover assembly.
2. Lift the document tray assembly.
3. Remove the five screws securing the cover (A). 
4. Remove the cover (A).
5. Remove the connector from the sensor (document tray length 2) (B).
6. Release the hook securing the sensor (document tray length 2) (B).
7. Remove the sensor (document tray length 2) (B).
Note:  The sensor (document tray length 1) and the sensor (document tray...

4-172Service Manual 7510 
Go Back Previous
Next
2000-sheet dual input (TTM) removals 
2000-sheet dual input (TTM)—top cover removal 
1. Pull out tray 2 assembly. 
2. Remove the two screws securing the top cover (A). 
3. Remove the top cover (A). 
2000-sheet dual input (TTM)—foot cover removal 
1. Pull out the TTM media tray 3 assembly.
2. Pull out the media tray 4 assembly. 
3. Remove the two screws securing the foot cover (A) to the machine.
A 

Repair information4-173
 7510
Go Back Previous
Next
4. Remove the foot cover (A). 
2000-sheet dual input (TTM)—right cover removal 
1. Remove the four screws securing the right cover (A). 
2. Remove the right cover (A) by lifting up and out. 
A
Front 

4-174Service Manual 7510 
Go Back Previous
Next
2000-sheet dual input (TTM)— tray module left cover removal 
1. Remove the four screws securing the tray module left cover (A). 
2. Remove the tray module left cover (A). 
2000-sheet dual input (TTM)—rear cover removal 
1. Remove the four screws securing the rear cover (A). 
2. Remove the rear cover (A). 
2000-sheet dual input (TTM)—caster removal 
1. Remove the media tray 2.
2. Remove the tray module left cover. See “2000-sheet dual input (TTM)— tray...

Repair information4-175
 7510
Go Back Previous
Next
7. Remove the caster (A). 
2000-sheet dual input (TTM)—tray support roll removal 
1. Remove the tray module left cover. See “2000-sheet dual input (TTM)— tray module left cover removal” 
on page 4-174. 
2. Remove TTM media tray 3 assembly. See “2000-sheet dual input (TTM)—TTM media tray 3 assembly 
removal” on page 4-178.
3. Remove media tray 4 assembly. See “2000-sheet dual input (TTM)—TTM media tray 4 assembly 
removal” on page 4-177.
4. Remove the...

4-176Service Manual 7510 
Go Back Previous
Next
8. Remove the shafts (D).
9. Remove the tray support rolls (B).  

Repair information4-177
 7510
Go Back Previous
Next
2000-sheet dual input (TTM)—TTM media tray 4 assembly removal 
1. Pull out the TTM media tray 4 assembly. 
2. Remove the two screws securing the TTM tray 4 media transport assembly (A) to the TTM media tray 4 
assembly (B). 
3. Push the TTM tray 4 media transport assembly (A) into the machine in the direction of the arrow. 
4. Remove the two screws securing the TTM tray 4 stopper (C) to the lower part of TTM media tray 4 assembly 
(B). 
5. Remove the...

4-178Service Manual 7510 
Go Back Previous
Next
2000-sheet dual input (TTM)—TTM media tray 3 assembly removal 
1. Remove the tray module left cover. See “2000-sheet dual input (TTM)— tray module left cover removal” 
on page 4-174. 
2. Open the TTM left door assembly.
3. Loosen the screw securing the TTM tray 3 stopper (A). 
4. Move the TTM tray 3 stopper (A) out in the direction of the arrow while pulling out the TTM media tray 3 
assembly (B). 
5. Remove the TTM media tray 3 assembly (B). 
2000-sheet...