Lexmark X9350 User Manual

Use thisToOn Hook DialDial a telephone number while listening to the call through
a speaker on the printer. This is useful when you must
navigate an automated answering system before sending
your fax.Delay Sending FaxEnter a specific time to send a fax.
Note:  Make sure the date and time are entered correctly
before setting a specific time to send a fax.Auto AnswerAnswer all incoming phone calls.Edit Fax SettingsChange fax settings, such as Cover Page, Color, Quality,
and Lighter/Darker.Fax SetupAccess...

•Press  or  repeatedly to scroll through the menu items or submenu until you reach the one you want to
change.
• Press 
 or  repeatedly to reach the value you want.
4 To go into other menu items and values to make additional changes, continue to use the navigation buttons
(
, , , and ).
5 If needed, press 
 repeatedly to return to the previous menu.
6 Press 
 to start the scan job.
The following table explains the function of each menu item and the one submenu in the  Scan Mode menu.
Use thisToScan...

4To go into other submenus, menu items, and values to make additional changes, continue to use the navigation
buttons (
, , , and ).
5 If needed, press 
 repeatedly to return to the previous menu.
The following table explains the function of each submenu or menu item in the  Setup menu.
Use thisToPaper HandlingChange settings relating to the size and type of paper loaded in the paper tray
or trays. You can also turn on the tray linking feature, if your printer has the
optional Tray 2 installed.Change...

Note: The user default setting remains in effect until you access the menu again, choose another value, and save it.
An asterisk (*) appears next to the user default setting.
Using the Paper Handling submenu
You can select the size and type of paper loaded into the trays from this submenu. It appears with different menu items
depending on whether the optional Tray 2 is installed.
Notes: • The Paper Handling submenu is available in other menus besides the  Setup menu.
• Tray 1 is the factory default...

Use thisToSet Date and TimeSet the current date and time and using the keypad numbers.Paper HandlingChange settings related to the loading of paper in the paper tray or trays. For
more information, see “Using the Paper Handling submenu” on page 54.LanguageChange the language shown on the control panel.CountryChange the country or region shown on the control panel to your country or region.Key Press ToneSet the volume of the tone when a control panel button is pressed to either On or
Off. On is the...

Use thisToPhoto SizeSet the photo size. Values are Hagaki, L, 2L, 60 x 80 mm, A6, 10 x 15 cm, A5, B5, A4, 13 x 18 cm,
3.5 x 5 in., 4 x 6 in., 5 x 7 in., 8 x 10 in., and 8.5 x 11 in.
Note:  Automatic is also in the list, but it is not selectable. The value changes to automatic based on
the value chosen for Layout.LayoutSpecify a layout for the photos. Values are Automatic, Borderless (1 Per Page), One Photo Centered,
or 1 Per Page through 16 Per Page.QualitySpecify a print quality for the photo. For more...

Use thisToRinging and AnsweringChoose specific values for receiving faxes, and opt to save them as
user default settings. For more information, see “Using the Ringing
and Answering submenu” on page 57.Fax PrintingChoose specific values for printing faxes, and opt to save them as
user default settings. For more information, see “Using the Fax
Printing submenu” on page 58.Dialing and SendingChoose specific values for sending faxes, and opt to save them as
user default settings. For more information, see...

Use thisToCaller ID PatternChoose from one of the following patterns available based on the country or region you
selected during initial setup. If phones in your country or region use two detection patterns,
call your telecommunications company to determine their subscribed pattern.
• Pattern 1 (FSK)
• Pattern 2 (DTMF)
Using the Fax Printing submenu
Use thisToIf Too BigChoose from values of Fit to Page or Use Two Pages.Fax FooterChoose to print identifying information at the bottom of each page of a...

Using the Change Scan Default Settings submenu1 From the  Setup menu, press 
 or repeatedly until  Change Scan Default Settings  is highlighted.
2 Press 
.
3 After changing values, press 
 to save these values and exit this submenu.
Use thisToColorChoose to scan in black and white or color.QualityChoose a resolution in dots per inch (dpi). Values are Automatic 150 dpi, 300 dpi, and 600 dpi.Original SizeSpecify the size of the original document. Values are Auto Detect, L, 2L, A6, A5, B5, A4, Wallet, 3 x 5...

Use thisToPhoto SizeSpecify the size of the photo to be printed. Values are
Hagaki, L, 2L, 60 x 80 mm, A6, 10 x 15 cm, A5, B5, A4,
13 x18 cm, 3.5 x 5 in., 4 x 6 in., 5 x 7 in., 8 x 10 in., or
8.5 x 11 in..
Note:  Automatic is also in the list, but it is not selectable.
The value changes to automatic based on the value
chosen for Layout.LayoutSpecify a layout for the photos. Values are Automatic,
Borderless (1 Per Page), One Photo Centered, or 1 Per
Page through 16 Per Page.QualitySpecify to print in...