Lexmark X9350 User Manual

Finding information about the printer
Setup sheets
DescriptionWhere to findThe Setup  sheets give you instructions for setting up
the printer. Follow the one for the type of setup you
need.You can find the  Setup sheets in the printer box or on the
Lexmark Web site at  www.lexmark.com.
Getting Started or Setup Solutions  booklet
DescriptionWhere to findThe Getting Started  booklet gives you instructions for
setting up hardware and software (on Windows
operating systems) and some basic instructions for...

User's GuideDescriptionWhere to findThe User's Guide  gives you instructions for using the
printer and other information such as:
• Using the software (on Windows operating systems)
• Loading paper
• Printing
• Working with photos
• Scanning (if supported by your printer)
• Making copies (if supported by your printer)
• Faxing (if supported by your printer)
• Maintaining the printer
• Connecting the printer to a network (if supported by
your printer)
• Troubleshooting problems with printing,...

Customer supportDescriptionWhere to find (North America)Where to find (rest of world)Telephone supportCall us at• US: 1-800-332-4120
Monday–Friday (8:00 AM–11:00 PM EST)
Saturday (Noon–6:00 PM EST)
• Canada: 1-800-539-6275
Monday–Friday (8:00 AM–11:00 PM EST)
Saturday (Noon–6:00 PM EST)
• Mexico: 001-888-377-0063
Monday–Friday (8:00 AM–8:00 PM EST)
Note:  Support numbers and times may change
without notice. For the most recent phone
numbers available, see the printed warranty
statement that shipped with...

Setting up the printer
Checking the box contents
NameDescription1Black print cartridgeCartridges to be installed into the printer.
Note:  Cartridge combinations vary depending on the product
purchased.2Color print cartridge3Telephone cordUse for faxing. For more information about connecting this cord, see
“Choosing a fax connection” on page 18. Your telephone cord may
look differently from the one shown.4Power cordAttaches to the power supply port located at the back of the printer.
Your power cord may...

NameDescription8Installation software CD•Installation software for the printer
• Help
• User's Guide  in electronic format
Installing another language control panel
These instructions apply only if you received one or more additional language control panels with the printer.
1 Lift the scanner unit.
2Grasp the control panel at the front. Lift and rotate it back to remove it (if one is installed).
3Choose the correct control panel for your language.
4 Align the tabs on the control panel with the holes...

5Lower the control panel slightly at its front. Press the control panel down until it  snaps into place.
Adjusting the display for easy viewing
You can tilt the control panel display to adjust it for easier viewing.
1 Place your finger in the finger groove to grasp the display from its underside.
2 Rotate the display forward to a comfortable viewing position.
Installing the optional Tray 2
You can purchase and install an optional Tray 2 to increase the paper loading capacity of the printer.
 16...

1Tray 2 base2Tray 2
Note: Decide on a location to set the Tray 2 base. The printer will be placed on top of it, so allow enough space.
1 Make sure the printer is turned off and disconnect the power cord from the wall outlet.
2 Remove Tray 2 from its packaging.
3 Remove any packaging tape from the base and tray.
4 Grasp the printer by its handholds to lift it.
5 Align the printer above the base.
6 Set the printer on top of the base.
 17
Downloaded From ManualsPrinter.com Manuals1
2   

Getting the printer ready to fax
The following connection methods may not be applicable in all countries or regions.CAUTION:  Do not use the fax feature during a lightning storm. Do not set up this product or make any electrical
or cabling connections, such as the power supply cord or telephone, during a lightning storm.
Choosing a fax connection
You can connect the printer with equipment such as a telephone, an answering machine, or a computer modem. If
problems occur, see “Setup troubleshooting” on...

Setting the printer to use the Fax feature without a computer
You use this method to set up your printer for faxing when the printer is not connected to a computer or to a network.
This method is used when your printer functions as a standalone fax machine.
1 Turn the printer on.
2 Press 
 or  repeatedly until  Fax is highlighted.
3 Press 
.
The  Fax Mode  menu appears.
4 Press 
 or  repeatedly until the  Fax Setup submenu is highlighted.
5 Press 
.
6 Press 
 or  repeatedly until the  Dialing and Sending...

2Connect the telephone line of your chosen telecommunications equipment to the left outlet of the adapter.
If your telecommunications equipment uses a US-style (RJ11) telephone line, follow these steps to connect the
equipment:
1 Remove the plug from the EXT port 
 on the back of the printer.
Note:  Once this plug is removed, any country- or region-specific equipment you connect to the printer by the
adapter, as shown, will not function properly.
2 Connect your telecommunications equipment directly to...