Lexmark X792 Manual

Remove packaging material, [area name]
Remove any remaining packaging material from the specified location.
Remove paper from standard output bin
Remove the stack of paper from the standard exit bin.
Remove paper from bin [x]
Remove the paper from the specified bin. The printer automatically senses paper removal and resumes printing.
If removing the paper does not clear the message, then touch Continue.
Remove paper from all bins
Output bins have reached their capacity. Remove paper from all output bins...

Tray [x] paper size unsupported
The paper size in the specified tray is unsupported. Replace it with a supported paper size.
Unsupported disk
An unsupported disk has been inserted. Remove the unsupported disk, and then install a supported one.
31.xx Missing or defective [color] cartridge
Try one or more of the following:
1Remove and reinstall the specified print cartridge.
For instructions on removing a print cartridge, touch More Information.
2Touch Continue to clear the message.
Note: If the message is...

37 Insufficient memory to collate job
Try one or more of the following:
Touch Continue to print the portion of the job already stored and begin collating the rest of the print job.
Cancel the current print job.
37 Insufficient memory for Flash Memory Defragment operation
Try one or more of the following:
Touch Continue to stop the defragment operation and continue printing.
Delete fonts, macros, and other data in printer memory.
Install additional printer memory.
37 Insufficient memory, some Held Jobs...

51 Defective flash detected
Try one or more of the following:
Touch Continue to clear the message and continue printing.
Cancel the current print job.
52 Not enough free space in flash memory for resources
Try one or more of the following:
Touch Continue to clear the message and continue printing.
Downloaded fonts and macros not previously stored in flash memory are deleted.
Delete fonts, macros, and other data stored in flash memory.
Upgrade to a larger capacity flash memory card.
53 Unformatted flash...

55 Unsupported option in slot [x]
1Turn the printer off.
2Unplug the power cord from the wall outlet.
3Remove the unsupported option card from the printer system board, and then replace it with a supported card.
4Connect the power cord to a properly grounded electrical outlet.
5Turn the printer back on.
56 Parallel port [x] disabled
Try one or more of the following:
Touch Continue to clear the message.
The printer discards any data received through the parallel port.
Make sure the Parallel Buffer menu...

57 Configuration change, some held jobs were not restored
Something has changed in the printer to invalidate the held jobs. Possible changes include:
The printer firmware has been updated.
Paper input options needed for the print job were removed.
The print job was created using data from a device in the USB port and the device is no longer in the USB port.
The printer hard disk contains print jobs that were stored while installed in a different printer model.
Touch Continue to clear the message.
58 Too...

4Connect the power cord to a properly grounded outlet.
5Turn the printer back on.
58 Input config error
1Turn the printer off.
2Unplug the power cord from the wall outlet.
3Check if all tray configurations are correct. Remove unnecessary trays if needed.
4Connect the power cord to a properly grounded electrical outlet.
5Turn the printer back on.
59 Incompatible output bin [x]
Try one or more of the following:
Remove the specified output bin.
Touch Continue to clear the message and continue printing...

80.xx Replace fuser
Replace the fuser using the instruction sheet that came with the replacement part.
80.xx Fuser missing
1Replace the fuser, following the instruction sheet that came with the replacement part.
2Touch Continue to clear the message and continue printing.
82.xx Replace waste toner bottle
1Replace the waste toner bottle.
For instructions on replacing the waste toner bottle, from the printer control panel touch More Information.
2Touch Continue to clear the message and continue printing....

88.xx [color] cartridge low
1Remove the specified cartridge.
Warning—Potential Damage: Be careful not to touch the photoconductor drum. Doing so may affect the print
quality of future print jobs.
2Firmly shake the cartridge side‑to‑side and front‑to‑back several times to redistribute the toner.
3Reinsert the cartridge, and then touch Continue to clear the message and continue printing.
Notes:
Repeat this procedure multiple times until the print remains faded. When the print remains faded, replace the...

1565 Emulation error, load emulation option
The printer automatically clears the message in 30 seconds and then disables the download emulator on the firmware
card.
To fix this, download the correct download emulator version from the Lexmark Web site at 
www.lexmark.com.
Solving printing problems
Multiple‑language PDF files do not print
The PDF files may contain unavailable fonts.
1Open the document you want to print in Adobe Acrobat.
2Click the printer icon > Advanced > Print as image > OK > OK.
Printer...