Lexmark X642e User Manual

151
23x and 24x jams
Paper jams in these areas can occur on the incline surface of a tray or across more than one tray. To 
clear these areas:
1Open the MFP paper tray, and remove any jammed media.
2Open the duplex tray.
To remove the media, pull up.
Downloaded From ManualsPrinter.com Manuals 

152 3
Open any optional trays beginning at the top, and remove any jammed media.
Pull the print media either up or down. If it does not pull easily one way, try the other way
4If you have an optional 2000-sheet feeder, open the front door, press the elevator button to 
lower the tray, remove the jam, and make sure the stack of print media is neat and aligned.CAUTION:Floor-mounted configurations require additional furniture for 
stability. You must use either a printer stand or printer base if 
using a...

153 5
Touch Continue.
CAUTION:Floor-mounted configurations require additional furniture for 
stability. You must use either a printer stand or printer base if 
using a 2000-sheet drawer. Certain other configurations also 
must have a printer stand or printer base. More information is 
available on our Lexmark Web site at www.lexmark.com/
multifunctionprinters.
Elevator button
Downloaded From ManualsPrinter.com Manuals 

154
200 and 201 Paper Jam Remove Cartridge
1Push the release latch, and lower the multipurpose feeder.
2Push the release latch, and open the top front cover.
3Lift and pull the print cartridge out of the MFP.
Warning:Do not touch the photoconductor drum on the underside of the cartridge. Use the 
cartridge handle whenever you are holding the cartridge.
4Place the print cartridge aside.
Note:Do not leave the cartridge exposed to light for extended periods.
Note:The print media may be covered with unfused...

155 5
Pull the print media up and toward you.
Warning:If the print media does not move immediately when you pull, stop pulling. You need 
to access the print media from the MFP rear door. 
6Align and reinstall the toner cartridge.
7Close the top front cover.
8Close the multipurpose feeder.CAUTION:Do not use any pointed objects to remove the paper. This 
could cause personal injury or damage to the MFP.
1
2
Downloaded From ManualsPrinter.com Manuals 

156 9
Touch Continue.
202 Paper Jam Open Rear Door
1If the paper is exiting the MFP, pull the media straight out, and then touch Continue. 
Otherwise, continue with step 2.
2Open the MFP rear door.
CAUTION:The inside of the MFP may be hot. Allow the MFP to cool 
before touching any internal components.
1
2
Downloaded From ManualsPrinter.com Manuals 

157 3
Remove the jammed media.
4Close the rear door.
5Touch Continue. CAUTION:Do not use any pointed objects to remove the paper. This 
could cause personal injury or damage to the MFP.
Downloaded From ManualsPrinter.com Manuals 

158
23x Paper Jam Open Duplex Rear Door
1Open the duplex rear door.
2Remove the jammed media.
Depending on the media location, pull the media either up or down.
3Close the duplex rear door. Make sure it snaps into place.
4Touch Continue.
Downloaded From ManualsPrinter.com Manuals 

159
Clearing ADF Jams
290, 291, 292, and 294 Scanner Jams
1Remove all original documents from the ADF.
2Open the ADF cover, and remove any jammed pages.
3Open the document cover, and remove any jammed pages.
4Open the scan unit access door, and remove any jammed pages.
5Close the scan unit access door.
6Close the ADF cover.
1234567890#1234567890#
Downloaded From ManualsPrinter.com Manuals 

160
13
Troubleshooting
Understanding MFP messages
The MFP displays three types of messages: status messages, attendance messages, and service 
messages. Status messages provide information about the current state of the MFP. They require no 
action on your part. Attendance messages alert you to MFP problems that require your intervention. 
Service messages also alert you to problems that require intervention. However, the MFP will stop 
printing and the errors are non-recoverable. It may be possible to...