Home > Lexmark > Printer > Lexmark X4650 User Manual

Lexmark X4650 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Lexmark X4650 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 166 Lexmark manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Setting up the printer
    Bypassing security warnings during software
    installation
    Third-party applications, including antivirus, security, and firewall programs may alert you about the printer software
    being installed. For your printer to work properly, allow the printer software to be installed on your computer.
    Setting up the printer as a copier only
    Use the following instructions if you do not want to connect the printer to a computer.
    Note: If you want to connect the printer to a computer, use the setup documentation and the printer software CD
    that came with the printer.
    1Unpack the printer.
    Note: Contents, such as the number of print cartridges, may vary by model.
    1
    2
    3WFI IP
    R
    I
    N
    T
    I
    N
    G1
    23
    4
    5
    6
    1Power cord
    2Printer software CD
    3USB cable or installation cable
    Note: Your printer model may not ship with a USB cable. Purchase a USB cable separately.
    4Networking Guide
    Note: Your printer model may not come with this publication.
    5Quick Setup sheet
    6Print cartridges
    Setting up the printer
    11
    Downloaded From ManualsPrinter.com Manuals 
    						
    							2Remove all tape and packing material from all areas of the printer.
    WFI IP
    R
    I
    N
    T
    I
    N
    G
    3Raise the paper support, and then extend the paper exit tray.
    WFI
    IPRINTINGWFI IP
    R
    I
    N
    T
    I
    N
    G2
    1
    4Extend the paper guides.
    5Connect the power cord to the printer, and then to an electrical outlet that is easily accessible and near the printer.
    1
    2
    Setting up the printer
    12
    Downloaded From ManualsPrinter.com Manuals 
    						
    							6Press  to turn on the printer.
    WFI IPRINTING
    7If prompted, set the language.
    121
    8If prompted, set the country/region.
    121
    Setting up the printer
    13
    Downloaded From ManualsPrinter.com Manuals 
    						
    							9Open the printer, and then press down on the print cartridge carrier levers.
    10Open the color cartridge foil, and then remove the cartridge from the pack.
    11If a storage unit is included, remove the color cartridge from the storage unit.
    1
    2
    Setting up the printer
    14
    Downloaded From ManualsPrinter.com Manuals 
    						
    							12Remove the tape from the color print cartridge, insert the cartridge in the right carrier, and then close the color
    cartridge lid.
    13If a black print cartridge is included in the box contents, open the black cartridge foil, and then remove the
    cartridge from the pack.
    Note: You may need to purchase a black print cartridge separately.
    Setting up the printer
    15
    Downloaded From ManualsPrinter.com Manuals 
    						
    							14Remove the tape from the black print cartridge, insert the cartridge in the left cartridge carrier, and then close
    the cartridge carrier lid.
    15Close the printer, and then load plain paper.
    1
    2
    Setting up the printer
    16
    Downloaded From ManualsPrinter.com Manuals 
    						
    							16From the printer control panel, press .
    An alignment page prints.
    17Discard or recycle the alignment page.
    Notes:
    The alignment page may differ from the one shown.
    Streaks on the alignment page are normal and do not indicate a problem.
    Setting up the printer
    17
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Understanding the parts of the printer
    WFI IP
    R
    I
    N
    T
    I
    N
    G
    1
    2
    3
    4
    56
    7
    8
    9
    10
    11
    Use theTo
    1Paper supportLoad paper.
    2Printer control panelOperate the printer.
    3Wi-Fi indicator
    Note: Your printer model may not have wireless
    capability and may not have this indicator.Check wireless status:
    Off indicates that the printer is not turned on or that
    no wireless option is installed.
    Orange
    – indicates that the printer is ready to be configured
    for wireless printing
    – indicates that the printer is connected for USB
    printing
    Orange blinking indicates that the printer is
    configured but is unable to communicate with the
    wireless network.
    Green indicates that the printer is connected to a
    wireless network.
    4PictBridge portConnect a PictBridge-enabled digital camera or a flash
    drive to the printer.
    5Card reader lightCheck card reader status. The light blinks to indicate
    that a memory card is being accessed.
    6Quick Connect laptop port
    Notes:
    Your printer model may not have this port.
    Do not use this port simultaneously with the rear USB
    port.
    Connect a laptop computer to the printer using a USB
    cable.
    Warning—Potential Damage: Do not touch the USB
    port except when plugging in or removing a USB cable
    or installation cable.
    7Memory card slotsInsert a memory card.
    8Paper exit trayHold paper as it exits.
    Setting up the printer
    18
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Use theTo
    9Top coverAccess the scanner glass.
    10Paper feed guardPrevent items from falling into the paper slot.
    11Paper guidesKeep paper straight when feeding.
    WFI IPRINTING
    2
    34
    6
    5
    WFI IP
    R
    I
    N
    T
    I
    N
    G
    1
    Use theTo
    1Scanner glassScan and copy photos and documents.
    2Scanner unitAccess the print cartridges.
    Remove paper jams.
    3Print cartridge carrierInstall, replace, or remove a print cartridge.
    4Rear USB port
    Note: Do not use this port simultaneously with the Quick
    Connect laptop port.Connect the printer to a desktop computer using a USB
    cable.
    Warning—Potential Damage: Do not touch the USB
    port except when plugging in or removing a USB cable
    or installation cable.
    5Power supply with portConnect the printer to a power source.
    6Internal wireless print server
    Note: Your printer model may not have wireless
    capability and may not have this print server.Connect the printer to a wireless network.
    Setting up the printer
    19
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Using the printer control panel buttons and menus
    Using the printer control panel
    The printer control panel contains:
    Power on/off button
    Two-line display that shows the printer status, messages, and menus
    11 buttons
    OK
    COPYSCANPHOTO START
    ON
    1
    3
    4
    5
    67
    8
    9
    12
    11
    210
    PressTo
    1Return to the previous screen.
    Exit from one menu level to a higher one.
    2Increase a number.
    Move the cursor one place to the right.
    Scroll through menus or settings on the display.
    3/ Switch to color mode or black-and-white mode.
    4Start a print, scan, or copy job, depending on which mode is selected.
    5Access the photo menu and print photos.
    6Access the scan menu and scan documents.
    7Turn the printer on and off.
    Switch to Power Saver mode.
    Note: Press 
     to switch to Power Saver mode. Press and hold  for two seconds to turn off
    the printer.
    8Access the copy menu and make copies.
    Setting up the printer
    20
    Downloaded From ManualsPrinter.com Manuals 
    						
    All Lexmark manuals Comments (0)

    Related Manuals for Lexmark X4650 User Manual