Lexmark X364dn User Manual

USB menu
Menu itemDescription
PCL SmartSwitch
On
OffSets the printer to automatically switch to PCL emulation when a print job received
through a USB port requires it, regardless of the default printer language
Notes:
On is the factory default setting.
When the Off setting is used, the printer does not examine incoming data.
When the Off setting is used, the printer uses PostScript emulation if the PS
Smartswitch setting is On. It uses the default printer language specified in the
Setup menu if the PS...

Menu itemDescription
USB with ENA
ENA Address
ENA Netmask
ENA GatewaySets the network address, netmask, and gateway information for an external print
server that is attached to the printer using a USB cable
Note: This menu item and its submenus are available only if the printer is attached
to an external print server through the USB port.
Settings menu
General Settings menu
Menu itemDescription
Display Language
English
Francais
Deutsch
Italiano
Espanol
Dansk
Norsk
Nederlands
Svenska
Portuguese
Suomi...

Menu itemDescription
Quiet Mode
Off
OnReduces the amount of noise produced by the printer
Notes:
Off is the factory default setting.
On configures the printer to produce as little noise as
possible.
Run Initial setup
Yes
NoInstructs the printer to run the setup wizard
Notes:
Yes is the factory default setting.
After completing the setup wizard by selecting Done at the
Country select screen, the default setting becomes No.
Paper Sizes
U.S.
MetricSpecifies the printer factory default measurements. The...

Menu itemDescription
Timeouts
Screen Timeout
15–300Sets the amount of time in seconds the printer waits before
returning the printer display to a Ready state
Note: 30 seconds is the factory default setting.
Timeouts
Print Timeout
Disabled
1–255Sets the amount of time in seconds the printer waits to receive an
end‑of‑job message before canceling the remainder of the print job
Notes:
90 seconds is the factory default setting.
When the timer expires, any partially printed page still in the
printer is...

Menu itemDescription
Factory Defaults
Do Not Restore
Restore NowReturns the printer settings to the factory default settings
Notes:
Do Not Restore is the factory default setting. Do Not Restore
keeps the user‑defined settings.
Restore returns all printer settings to the factory default
settings except Network/Ports menu settings. All downloads
stored in RAM are deleted.
Copy Settings menu
Menu itemDescription
Content
Text
Text/Photo
PhotographSpecifies the type of content contained in the copy job...

Menu itemDescription
Print Page Borders
On
OffSpecifies whether a border is printed around the edge of the page at the margins
Note: Off is the factory default setting.
Collate
On
OffKeeps the pages of a print job stacked in sequence when making multiple copies of
the job
Note: Off is the factory default setting.
Original Size
Letter
Legal
Executive
Folio
Statement
Universal
ID Card
4 x 6 in.
3 x 5 in.
Business Card
Custom Scan Size 
A4
A5
Oficio (Mexico)
A6
JIS B5Specifies the paper size of the original...

Menu itemDescription
Overlay
Off
Confidential
Copy
Draft
Urgent
CustomSpecifies overlay text that is printed on each page of the copy job
Note: Off is the factory default setting.
Allow priority copies
On
OffAllows interruption of a print job to copy a page or document
Note: On is the factory default setting.
Background Removal
‑4 to +4Adjusts the amount of background visible on a copy
Note: The factory default setting is 0.
Contrast
0–5
Best for contentSpecifies the contrast used for the copy job
Note:...

Menu itemDescription
Memory Use
All receive
Mostly receive
Equal
Mostly sent
All sendDefines the amount of non-volatile memory used to fax a job
Notes:
“All receive” specifies that all the memory is set to receive fax jobs.
“Mostly receive” specifies that most of the memory is set to receive fax
jobs.
“Equal” is the factory default setting. It splits the memory for sending and
receiving fax jobs into equal amounts.
“Mostly sent” specifies that most of the memory is set to send fax jobs.
“All send”...

Menu itemDescription
Sides (Duplex)
Off
Long edge
Short edgeSpecifies how the text and graphics are oriented on the page
Notes:
Sides (Duplex) is not available on selected printer models.
Off is the factory default setting.
Long edge assumes binding along the long edge of the page (left edge for
portrait orientation and top edge for landscape orientation).
Short edge assumes binding along the short edge of the page (top edge for
portrait orientation and left edge for landscape orientation).
Content
Text...

Menu itemDescription
Max Speed
2400
4800
9600
14400
33600Specifies the maximum speed in baud at which faxes are sent
Note: 33600 baud is the factory default setting.
Background Removal
‑4 to +4Adjusts the amount of background visible on a copy
Note: 0 is the factory default setting.
Contrast
Best for content
0–5Specifies the contrast of the output
Note: “Best for content” is the factory default setting.
Shadow Detail
‑4 to +4Adjusts the amount of shadow detail visible on a copy
Note: 0 is the factory...