Lexmark X363dn User Manual

Configure MP menu
This menu is available only on printer models equipped with multipurpose feeders.
Menu itemDescription
Configure MP
Cassette
ManualDetermines when the printer selects paper from the multipurpose feeder
Notes:
Cassette is the factory default setting.
The Cassette setting configures the multipurpose feeder as an automatic
paper source.
When Manual is selected, the multipurpose feeder can be used only for
manual feed print jobs.
Paper Texture menu
In the Paper Texture menu, the Select Type...

Paper Weight menu
In the Paper Weight menu, the Select Type and Select Weight features work together to enable you to select the weight
for a specific type of paper.
Menu itemDescription
Select Type
Plain Weight
Card Stock Weight
Transparency Weight
Recycled Weight
Labels Weight
Bond Weight
Envelope Weight
Rough Envelope Weight
Letterhead Weight
Preprinted Weight
Colored Weight
Light Weight
Heavy Weight
Rough/Cotton Weight
Custom  TextureSpecifies the paper type
Select Weight
Light
Normal
HeavyAfter you...

Menu itemDescription
Set Loading
Duplex
OffSpecifies whether duplex (2‑sided) printing is turned on
Note: Off is the factory default setting.
Custom Types menu
Menu itemDescription
Custom Type 
Paper
Card Stock
Transparency
Rough/Cotton
Labels
EnvelopeName a Custom Type , and this user‑defined name displays instead of
Custom Type .
Notes:
The Custom Name must be limited to 16 characters.
Paper is the factory default setting for the Custom Type.
The custom media type must be supported by the selected tray...

Custom Scan Sizes menu
Menu itemDescription
Custom Scan Size 
Width
1–8.50 inches (25–216 mm)
Height
1–14 inches (25–356 mm)
Orientation
Portrait
Landscape
2 scans/side
Off
OnSpecifies a custom scan size name and options. This name replaces a Custom
Scan Size  name in the printer menus.  can be either 1 or 2.
Notes:
The panel displays “ID Card” in place of “Custom Scan Size 1” unless you
have named it differently.
4.65 inches is the US factory default setting for Width for Size 1.
118 millimeters is the...

Menu itemDescription
Portrait Height
3–14.17 inches
76–360 mmSets the portrait height
Notes:
If the height exceeds the maximum, then the printer uses the
maximum height allowed.
14 inches is the US factory default setting. Inches can be increased in
0.01‑inch increments.
356 mm is the international factory default setting. Millimeters can
be increased in 1‑mm increments.
Feed Direction
Short Edge
Long EdgeSpecifies the feed direction
Notes:
Short Edge is the factory default setting.
Long Edge appears...

Menu itemDescription
Print DirectoryDisplays the resources stored in the users flash option. This feature appears only
if there is an installed/mounted flash device.
Asset ReportPrints a report containing asset information including the printer serial number
and model name. The report contains text and UPC barcodes that can be scanned
into an asset database.
Network/Ports menu
Active NIC menu
Menu itemDescription
Active NIC
Auto
Notes:
Auto is the factory default setting.
This menu item appears only if...

Menu itemDescription
NPA Mode
Off
AutoSets the printer to perform the special processing required for bidirectional
communication following the conventions defined by the NPA protocol
Notes:
Auto is the factory default setting
Changing this setting from the printer control panel and then exiting the
menus causes the printer to restart. The menu selection is updated.
Network Buffer
Disabled
AutoSets the size of the network input buffer
Notes:
Auto is the factory default setting.
The value can be changed...

Network Card menu
Menu itemDescription
View Card Status
Connected
DisconnectedAllows you to ascertain whether the Network Card is connected.
View Card SpeedReflects the speed of a currently active network card.
View Network Address
UAA
LAABoth addresses are represented by 12‑digit hexadecimal numbers.
Job Timeout
0‑225 secondsSets the amount of time in seconds that a network print job can take before it
is canceled.
Notes:
90 seconds is the factory default setting.
A setting value of 0 disables the...

Menu itemDescription
TCP/IP
Enable DHCP
Enable AutoIP
Enable FTP/TFTP
Enable HTTP Server
Yes
NoLets you view or change the settings
Note: Yes is the factory default setting for each.
TCP/IP
WINS Server AddressLets you view or change the setting
Note: This is a four‑field IP address.
TCP/IP
Enable DDNS
Enable mDNSLets you view or change the settings
Note: Yes is the factory default setting for both.
TCP/IP
DNS Server AddressLets you view or change the setting
Note: This is a four‑field IP address.
IPv6...

This menu is available from the Network/Ports menu:
Network/Ports > Network  > Net  Setup > Wireless
Menu itemDescription
Network Mode
Infrastructure
Ad hocSpecifies the network mode
Notes:
Infrastructure mode lets the printer access a network using an
access point.
Ad hoc is the factory default setting. Ad hoc mode configures the
printer for wireless networking directly between it and a computer.
Compatibility
802.11n
802.11b/g
802.11b/g/nSpecifies the wireless standard for the wireless network
Note:...