Lexmark X363dn User Manual

Menu itemDescription
Font Priority
Resident
Flash/DiskEstablishes the font search order
Notes:
Resident is the factory default setting.
A formatted flash memory option card must be installed in the printer
and operating properly for this menu item to be available.
The flash memory option cannot be Read/Write, Write, or
password‑protected.
Job Buffer Size must not be set to 100%.
PCL Emul menu
Menu itemDescription
Font Source
Resident
Download
Flash
AllSpecifies the set of fonts available
Notes:
Resident...

Menu itemDescription
PCL Emulation Settings
Orientation
Portrait
LandscapeSpecifies the orientation of text and graphics on the page
Notes:
Portrait is the factory default setting.
Portrait prints text and graphics parallel to the short edge of the page.
Landscape prints text and graphics parallel to the long edge of the page.
PCL Emulation Settings
Lines per Page
1–255
60
64Specifies the number of lines that print on each page
Notes:
60 is the US factory default setting. 64 is the international default...

Menu itemDescription
Tray Renumber
View Factory Def
NoneDisplays the factory default setting assigned to each tray, drawer, or feeder
Tray Renumber
Restore Defaults
Yes
NoReturns all tray, drawer, and feeder assignments to the factory default settings
Image menu
Menu itemDescription
Auto Fit
On
OffSelects the optimal paper size, scaling, and orientation
Notes:
On is the factory default setting.
The On setting overrides scaling and orientation settings for some images.
Invert
On
OffInverts bi‑tonal...

Menu itemDescription
Set Date/Time
Yes
NoInstructs the printer to run the setup wizard
Notes:
Yes is the factory default setting.
After completing the setup wizard by selecting Done at the Country/Region
select screen, the default becomes No.
Time Zone (North, Central, and
South America)
Hawaii *
Alaska
Tijuana (PST)
USA/Canada PST
USA/Canada MST
USA/Canada CST
USA/Canada EST
Canada AST
Caracas (VET)
Newfoundland (NST)
Brasilia (BRT)Specifies the time zone for the fax
Note: * indicates that this value...

Menu itemDescription
Time Zone (Australia and the
Pacific region)
Australia WST
Australia CST Darwin (CST) *
Australia EST
Queensland (EST) *
Tasmania (EST)
Wellington (NZST)
Not ListedSpecifies the time zone for the fax
Note: * indicates that this value does not have pre-programmed Daylight Savings
Time Start and End times.
Observe DST
On
OffAccommodates Daylight Savings Time changes
Note: On is the factory default setting.
Enable NTP
On
OffLets the printer clock synchronize with the Network Time...

Maintaining the printer
Cleaning the exterior of the printer
1Make sure that the printer is turned off and unplugged from the wall outlet.
CAUTION—SHOCK HAZARD: To avoid the risk of electric shock when cleaning the exterior of the printer,
unplug the power cord from the wall outlet and disconnect all cables to the printer before proceeding.
2Remove all paper from the printer.
3Dampen a clean, lint‑free cloth with water.
Warning—Potential Damage: Do not use household cleaners or detergents, as they may...

3Wipe the areas shown and let them dry.
4Close the scanner cover.
Cleaning the ADF separator rollers
After you have copied over 50,000 copies using the ADF, clean the ADF separator rollers.
1Open the ADF cover.
2Unlock the separator roll.
3Remove the separator roll.
4Use a clean, lint-free cloth dampened with water to wipe the separator rollers.
Maintaining the printer147
Downloaded From ManualsPrinter.com Manuals 

5Reinstall the separator roll.
6Lock the separator roll.
7Close the ADF cover.
Storing supplies
Choose a cool, clean storage area for the printer supplies. Store supplies right side up in their original packing until you
are ready to use them.
Do not expose supplies to:
Direct sunlight
Temperatures above 35°C (95°F)
High humidity above 80%
Salty air
Corrosive gases
Heavy dust
Checking the status of supplies from a network computer
Note: The computer must be connected to the same network as the printer....

1Type the printer IP address into the address field of your Web browser.
Note: If you do not know the IP address of the printer, print a network setup page and locate the IP address in
the TCP/IP section.
2Click Device Status. The Device Status page appears, displaying a summary of supply levels.
Moving the printer to another location
Warning—Potential Damage: Damage to the printer caused by improper moving is not covered by the printer
warranty.
CAUTION—POTENTIAL INJURY: Follow these guidelines to avoid...

Ordering supplies
To order supplies in the U.S., contact Lexmark at 1-800-539-6275 for information about Lexmark authorized supplies
dealers in your area. In other countries or regions, visit the Lexmark Web Site at www.lexmark.com or contact the
place where you purchased the printer.
Warning—Potential Damage: Damage caused by the use of a supply or replacement item not produced by the
manufacturer of this printer is not covered under warranty. Degraded print quality may result from using supplies or...