Lexmark X 2670 Manual

							6Open the printer, and then press down on the levers.
7Remove the tape from the black cartridge, insert the cartridge in the left carrier, and then close the black cartridge
carrier lid.
Setting up the printer
11 
						

							8Remove the tape from the color cartridge, insert the cartridge in the right carrier, and then close the color cartridge
carrier lid.
9Close the printer, and then load paper.
10Press and hold the  button for three seconds.
Setting up the printer
12 
						

							An alignment page prints.
11Place the printed page on the scanner glass.
12Press the  button.
13Discard the alignment page.
Setting up the printer
13 
						

							Notes:
The alignment page may differ from the one shown.
Streaks on the alignment page are normal, and do not indicate a problem.
Understanding the parts of the printer
Use theTo
1Paper supportLoad paper.
2Printer control panelOperate the printer.
3Paper exit trayHold paper as it exits.
4Top coverAccess the scanner glass.
5Paper feed guardPrevent small objects from falling inside the printer.
6Paper guideKeep paper straight when feeding.
7Scanner glassCopy, scan, fax, or remove an item.
Setting up the printer
14 
						

							Use theTo
1Scanner unitAccess the print cartridges.
2Scanner supportHold up the scanner unit.
3Print cartridge carrierInstall, replace, or remove a print cartridge.
4Power supply with portConnect the printer to a power source.
5USB portConnect the printer to a computer using a USB cable.
Warning—Potential Damage: Do not touch the USB port except when plugging in or
removing a USB cable.
Setting up the printer
15 
						

							Using the printer control panel
PressTo
1Start a color copy of a document or photo.
2Start a black-and-white copy of a document or photo.
3Start a 4 x 6-inch color photo copy.
4Scan a document or photo to the computer.
5Load or eject paper.
6Turn the printer on or off.
Cancel a print, copy, or scan job in progress.
Reset the printer.
7Cancel a print, copy, or scan job in progress.
8Set the number of copies.
Setting up the printer
16 
						

							CheckTo
1The displayDetermine the number of copies to be printed.
2
The  light
Determine if the color print cartridge needs to be replaced.
Determine if the color print cartridge is missing or invalid.
3
The  light
Determine if the black or photo print cartridge needs to be replaced.
Determine if the black or photo print cartridge is missing or invalid.
Setting up the printer
17 
						

							Understanding the printer software
Installing printer software
Using Windows
1Close all open software programs.
2Insert the printer software CD.
3From the main installation screen, click Install.
4Follow the instructions on the screens.
Using Macintosh
1Close all open software applications.
2Insert the printer software CD.
3From the Finder desktop, double-click the printer CD icon that automatically appears.
4Double-click the Install icon.
5Follow the instructions on the screens.
Using the World Wide Web
1Go to the Lexmark Web site at www.lexmark.com.
2From the home page, navigate through the menu selection, and then click Drivers & Downloads.
3Choose the printer and the printer driver for your operating system.
4Follow the instructions on the screens to download the driver and install the printer software.
Installing the optional XPS driver (Windows Vista
users only)
The XML Paper Specification (XPS) driver is an optional printer driver designed to make use of the advanced XPS
color and graphics features that are available only for Windows Vista users. To use XPS features, you must install the
XPS driver as an additional driver after you install the regular printer software.
Notes:
Before installing the XPS driver, you must install the printer on your computer.
Before installing the XPS driver, you must install the Microsoft QFE Patch and then extract the driver files from
the installation software CD. To install the patch, you must have administrator privileges on the computer.
Understanding the printer software
18 
						

							To install the Microsoft QFE Patch and extract the driver:
1Insert the installation software CD, and then click Cancel when the Setup Wizard appears.
2Click  Computer.
3Double-click the CD or DVD drive icon, and then double-click Drivers.
4Double-click xps, and then double-click the setupxps file.
XPS driver files are copied to your computer, and any required Microsoft XPS files are launched. Follow the
instructions on the screen to finish installing the patch.
To install the XPS driver:
1Click  Control Panel.
2Under Hardware and Sound, click Printer, and then click Add a Printer.
3From the Add Printer dialog, click Add a local printer.
4From the “Use an existing port” drop-down menu, select Virtual printer port for USB, and then click Next.
5Click Have disk.
The Install From Disk dialog appears.
6Click Browse, and then navigate to the XPS driver files on your computer:
aClick Computer, and then double-click (C:).
bDouble-click Drivers, and then double-click Printer.
cDouble-click the folder that has your printer model number, and then double-click Drivers.
dDouble-click xps, and then click Open.
eFrom the Install From Disk dialog, click OK.
7Click Next on the two additional dialogs that appear.
For more information on the XPS driver, see the XPS readme file on the installation software CD. The file is located
in the xps folder with the setupxps batch file (D:\Drivers\xps\readme).
Using the Windows printer software
When you set up the printer using the installation software CD, all the necessary software was installed. You may
have chosen to install some additional programs. The following table provides an overview of various software
programs and what they can help you do.
If you did not install these additional programs during initial installation, then reinsert the installation software CD,
run the installation software, and then select Install Additional Software from the Software Already Installed screen.
Note: Your printer may not come with some of these programs or some of the functions of these programs, depending
on the features of the printer that you purchased.
Use theTo
LexmarkTM Productivity Studio or
Lexmark FastPicsScan, copy, fax, e-mail, or print a photo or document.
Transfer photos.
Make photo greeting cards.
Adjust settings for the printer.
Understanding the printer software
19 
						

							Use theTo
Lexmark Fax Solutions SoftwareSend a fax.
Receive a fax
Add, edit, or delete contacts in the built-in phone book.
Access the Lexmark Fax Setup Utility. Use the Lexmark Fax Setup Utility to
set the Speed Dial and Group Dial numbers, set Ringing and Answering, and
print fax history and status reports.
Printing PreferencesWhen you select File  Print with a document open, a Printing Preferences
dialog appears. The dialog lets you select options for the print job such as the
following:
Select the number of copies to be printed.
Print two-sided copies.
Select the paper type.
Add a watermark.
Enhance images.
Save settings.
Lexmark Wireless Setup UtilitySet up the wireless printer on a wireless network.
Change the wireless settings of the printer.
Using the Macintosh printer software
Use theTo
Print dialogAdjust the print settings and schedule print jobs.
Printer Services dialogAccess the printer utility.
Troubleshoot.
Order ink or supplies.
Contact Lexmark.
Check the printer software version installed on the computer.
Applications are also installed with the printer software during installation. These applications are saved in the printer
folder that appears on the Finder desktop after installation.
1From the Finder desktop, double-click the printer folder.
2Double-click the icon of the application that you want to use.
Use theTo
Lexmark All-In-One CenterScan photos and documents.
Customize settings for scan jobs.
Lexmark Fax Setup UtilityCustomize settings for fax jobs.
Create and edit the Speed Dial list.
Understanding the printer software
20