Lexmark X 204 Service Manual

Diagnostic aids3-21
7011-2xx / 3xx
Disable Scanner
This menu item is used to disable the MFP scanner if it is malfunctioning. The MFP must be powered off and on 
for the new setting’s to take effect. To change the setting, perform the following steps:
1.In the configuration menu, use the arrow keys to scroll to the Disable Scanner menu item.
2.Press .
3.Use the arrow key to scroll to the desired setting. The options are Enable ADF/FB, Disable ADF/FB, 
Disable ADF only, Auto Disabled.
4.Press .
5.Press...

3-22Service Manual 7011-2xx / 3xx
SE Menu
Print SE Menus
General
Copyright - Displays copyright information.
Optra Forms mode - On or off
Code Revision Info
Network Code Level - Displays network code level
Network Compile Info - Displays compile information
Printer Code Level - Displays printer code information
Printer Compile Info - Displays compile information
History
Print History
Mark History
History Mode
MAC
Set Card Speed
LAA
Keep Alive
NVRAM
Dump NVRAM
Re-init NVRAM
NPAP
Print Alerts
TCP/IP...

Diagnostic aids3-23
7011-2xx / 3xx
Paper jams
Avoiding jams
The following hints can help you avoid jams:
•Use only recommended paper or specialty media.
For more information, see the Card Stock & Label Guide available on the Lexmark Web site at 
www.lexmark.com/publications.
•Do not load too much paper. Make sure the stack height does not exceed the indicated maximum height.
•Do not load wrinkled, creased, damp, or curled paper.
•Flex, fan, and straighten paper before loading it.
•Do not use paper that...

3-24Service Manual 7011-2xx / 3xx
200 - 201 paper jam
200 paper jam
1.
Remove the tray from the printer.
2.Remove the jam if you can see it. If the jam is not visible, see the instructions for a 201 jam.
3DEF6MNO9WXYZ#2ABC5JKL8TUV01@!.GHI4P
Q
R
S7*
3DEF6MNO9WXYZ#
2ABC5JKL8TUV0
1@!.GHI4P
Q
R
S7* 

Diagnostic aids3-25
7011-2xx / 3xx
201 paper jam
1.
Open the front door, and remove the photoconductor kit and toner cartridge.
2.Lift the flap at the front of the printer, and remove the jammed media.
3.Align and insert the photoconductor kit and toner cartridge.
4.Close the front door.
5.Insert the tray.
6.Press . 
3DEF6MNO9WXYZ#2ABC5JKL8TUV01@!.GHI4PQRS7* 

3-26Service Manual 7011-2xx / 3xx
202 paper jam
1.
Open the front door, and remove the photoconductor kit and toner cartridge.
2.Lift the flap at the front of the printer, and remove the jammed media.
3DEF6MNO9WXYZ#2ABC5JKL8TUV01@!.GHI4PQRS7* 

Diagnostic aids3-27
7011-2xx / 3xx
3.Open the rear door.
4.Remove any jam.
5.Close the rear door.
6.Align and insert the photoconductor kit and toner cartridge.
7.Close the front door.
8.Press . 

3-28Service Manual 7011-2xx / 3xx
241 paper jam
1.
Remove the tray from the printer.
2.Remove the jam.
3.Insert the tray.
4.Press .
3DEF6MNO9WXYZ#2ABC5JKL8TUV01@!.GHI4P
Q
R
S7* 

Diagnostic aids3-29
7011-2xx / 3xx
251 paper jam
A sheet of paper or specialty media failed to feed completely from the manual feeder. Part of it may still be 
visible. If it is visible, then gently pull the jammed sheet from the front of the manual feeder. 

3-30Service Manual 7011-2xx / 3xx
If the sheet is not visible, complete the following steps:
1.Remove the photoconductor kit and cartridge.
2.Lift the flap at the front of the printer, and remove any jammed media.
3.Align and insert the photoconductor kit and toner cartridge.
4.Press .
3DEF6MNO9WXYZ#2ABC5JKL8TUV01@!.GHI4PQRS7*