Lexmark W820n User Manual

309
What this message means:
Data has been sent to the printer through a USB port, but the USB port is disabled.
What you can do:

PressGoto clear the message. The printer discards any data received through the USB port.
Make sure the USB Buffer menu item in the USB Menu is not set to Disabled.
See also:
USB Buffer
57 Configuration
Change
What this message means:
The printer was unable to restore confidential or held jobs on the hard disk because the print
configuration has changed.
Note:The messages57...

310
58 Too Many
Disks Installed
What this message means:
Too many hard disks are installed on the printer. The printer only supports one hard disk at a
time.
What you can do:
Turn off and unplug the printer. Remove the excess hard disks from the printer. Plug in the
printer and turn it on.
See also:
Removing option cards
58 Too Many
Flash Options
What this message means:
Too many flash memory options are installed on the printer.
What you can do:
Turn off and unplug the printer. Remove the excess flash...

311
62 Disk Full
What this message means:
There is not enough memory on the hard disk to store the data sent to the printer.
What you can do:

PressGoto clear the message and continue processing. Any information not previously stored
on the hard disk is deleted.
Delete fonts, macros, and other data stored on the hard disk.
63 Unformatted Disk
What this message means:
The printer detects an unformatted hard disk.
What you can do:

PressGoto clear the message and continue printing.
Format the disk...

312
80 Scheduled
Maintenance
What this message means:
The printer requires replacement of routine maintenance items to maintain top performance
and avoid print quality and paper feed problems.
What you can do:
Replace the maintenance items and reset the printer maintenance page counter.
See also:
Replacing the items in the maintenance kit;Replacing the fuser;
Replacing the transfer roller;Replacing pick rollers;Cleaning the wiper blade;Resetting
the maintenance page counter
88 Toner Low
What this message...

313
1565 Emul Error
Load Emul Option
What this message means:
The download emulator version on the firmware card does not match the printer code version.
This could occur if you updated printer firmware or moved a firmware card from one printer to
another.
What you can do:
The message automatically clears in 30 seconds. The printer returns to theReadymessage
and disables the download emulator on the firmware card.
Download the correct download emulator version from the Lexmark Web site at
www.lexmark.com...

314
77
Notices
Edition notice
Trademarks
Licensing notice
Safety information
Cautions and warnings
Electronic emission notices
German acoustics statement
Energy Star
Laser notice
Downloaded From ManualsPrinter.com Manuals 

315
Edition: April 2001
The following paragraph does not apply to any country where such provisions are inconsistent
with local law:LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS”
WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in
certain transactions; therefore, this statement may not apply to you.
This...

316
Trademarks
Lexmark, Lexmark with diamond design, MarkNet, and MarkVision are trademarks of Lexmark
International, Inc., registered in the United States and/or other countries.
PictureGrade is a trademark of Lexmark International, Inc.
Operation ReSource is a service mark of Lexmark International, Inc.
PCL
®is a registered trademark of the Hewlett-Packard Company. PCL is Hewlett-Packard Company’s
designation of a set of printer commands (language) and functions included in its printer products. This...

317
Other trademarks are the property of their respective owners.
Licensing notice
The printer resident software contains:
Software developed and copyrighted by Lexmark
Lexmark modified software licensed under the provisions of the GNU General Public License
version 2 and the GNU Lesser General Public License version 2.1
Software licensed under the BSD license and warranty statements
Click the title of the document you want to review:
The Lexmark modified GNU licensed software is free software; you...

318
The power cord must be connected to an electrical outlet that is near the product and easily
accessible.
Refer service or repairs, other than those described in the operating instructions, to a
professional service person.
This product is designed, tested and approved to meet strict global safety standards with the
use of specific Lexmark components. The safety features of some parts may not always be
obvious. Lexmark is not responsible for the use of other replacement parts.
Your product uses a...