Lexmark W820n User Manual

259
PS SmartSwitch
Purpose:
To configure the printer so it automatically switches to PostScript emulation when a print job received
through the infrared port requires it, regardless of the default printer language.
Va l u e s :
See also:
PCL SmartSwitch;Printer Language
Transmit Delay
Purpose:
To define the amount of time, in seconds, the printer must wait before transmitting meaningful infrared
data to the host computer, as well as the amount of time the printer requests that the host computer
wait...

260
Window Size
Purpose:
To specify the maximum number of infrared frames the printer can receive before sending an
acknowledgment to the host computer.
Va l u e s :
Auto*Printer sets the Window Size value during a power-on reset to maximize link performance
(recommended).
1User sets the Window Size to one frame (1). If you have trouble printing using the infrared
port, changing the Window Size menu item to 1 may resolve the problem.
Downloaded From ManualsPrinter.com Manuals 

261
74
LocalTalk Menu
Use the LocalTalk Menu to change printer settings affecting jobs sent to the printer through a
LocalTalk port.
Select a menu item for more details:
Note:Values marked by an asterisk are the factory default settings.
Job Buffering
Purpose:
To specify whether the printer temporarily stores jobs on the hard disk before printing.
Va l u e s :
Note:Changing the Job Buffering menu item automatically resets the printer.
LocalTalk Addr
Purpose:
To identify the LocalTalk Node number assigned...

262
LocalTalk Buffer
Purpose:
To configure the size of the LocalTalk input buffer.
Va l u e s :
Note:Changing the LocalTalk Buffer menu item automatically resets the printer.
See also:
Resource Save
LocalTalk Name
Purpose:
To identify the printer model name stored in printer memory. This menu item cannot be modified
through the operator panel.
LocalTalk Port
Purpose:
To activate the LocalTalk port.
Va l u e s :
LocalTalk Zone
Purpose:
To identify the LocalTalk Zone provided by the LocalTalk network. This...

263
NPA Hosts
Purpose:
To specify the maximum number of NPA hosts that can register for NPA alerts.
Va l u e s :
NPA Mode
Purpose:
To specify whether the printer performs the special processing required for bidirectional
communication, following the conventions defined in the Network Printing Alliance (NPA) Protocol.
Va l u e s :
Note:Changing this menu item automatically resets the printer.
PCL SmartSwitch
Purpose:
To configure the printer so it automatically switches to PCL emulation when a print job...

264
PS SmartSwitch
Purpose:
To configure the printer so it automatically switches to PostScript emulation when a print job received
through the LocalTalk por t requires it, regardless of the default printer language.
Va l u e s :
See also:
PCL SmartSwitch;Printer Language
On*Printer examines data on the LocalTalk interface and selects PostScript emulation if the data
indicates that is the required printer language.
OffPrinter does not examine the incoming data. The printer uses PCL emulation to process...

265
75
USB Menu
Use the USB Menu to change printer settings affecting a Universal Serial Bus (USB) port (USB
Option ).
Select a menu item for more details:
Note:Values marked by an asterisk are the factory default settings.
Job Buffering
Purpose:
To specify whether the printer temporarily stores jobs on the hard disk before printing.
Va l u e s :
Note:Changing the Job Buffering menu item automatically resets the printer.
Job Buffering
MAC Binary PS
NPA Mode
PCL SmartSwitch
PS SmartSwitch
USB...

266
MAC Binary PS
Purpose:
To configure the printer to process Macintosh binary PostScript print jobs.
Va l u e s :
NPA Mode
Purpose:
To specify whether the printer performs the special processing required for bidirectional
communication, following the conventions defined in the Network Printing Alliance (NPA) Protocol.
Va l u e s :
Note:Changing this menu item automatically resets the printer.
PCL SmartSwitch
Purpose:
To configure the printer so it automatically switches to PCL emulation when a print...

267
PS SmartSwitch
Purpose:
To configure the printer so it automatically switches to PostScript emulation when a print job received
through the USB port requires it, regardless of the default printer language.
Va l u e s :
See also:
PCL SmartSwitch;Printer Language
USB Buffer
Purpose:
To configure the size of the USB input buffer.
Va l u e s :
Note:Changing the USB Buffer menu item automatically resets the printer.
See also:
Resource Save
On*Printer examines data on the USB interface and selects...

268
76
Understanding printer messages
The printer operator panel displays messages describing the current state of the printer and indicates
possible printer problems you must resolve. This topic provides a list of all printer messages, explains
what they mean, and tells you how to clear the messages.
Click a letter or number at the bottom of the page to locate information about a message beginning
with that character.
Ready
Tr a y 3 E m p t y
1Menu2Select3Return4
Go5Stop6
Downloaded From...