Lexmark W820n User Manual

249
PCL SmartSwitch
Purpose:
To configure the printer so it automatically switches to PCL emulation when a print job received
through the serial port requires it, regardless of the default printer language.
Va l u e s :
See also:
PS SmartSwitch;Printer Language
PS SmartSwitch
Purpose:
To configure the printer so it automatically switches to PostScript emulation when a print job received
through the serial port requires it, regardless of the default printer language.
Va l u e s :
See also:
PCL...

250
Robust XON
Purpose:
To determine whether the printer communicates availability to the computer.
Va l u e s :
This menu item only applies to the serial port if Serial Protocol is set to XON/XOFF.
RS-232/RS-422
Purpose:
To specify the type of serial communication.
Va l u e s :
Note:Selecting RS-422 automatically sets Serial Protocol to XON/XOFF.
RS-422 Polarity
Purpose:
To establish the behavior of the positive and negative signals when using RS-422 serial
communication.
Va l u e s :
Off*Printer waits...

251
Serial Buffer
Purpose:
To configure the size of the serial input buffer.
Va l u e s :
Note:Changing the Serial Buffer menu item automatically resets the printer.
See also:
Resource Save
Serial Protocol
Purpose:
To select the hardware and software handshaking values for the serial interface.
Va l u e s :
See also:
Technical Reference
DisabledDisables the serial port.
Auto*Printer automatically calculates the Serial Buffer size (recommended setting).
3K to maximum
size allowedUser specifies the Serial...

252
72
Network Menu
Use the Network Menu to change printer settings affecting jobs sent to the printer through a network
port (either Standard Network or Network Opt ).
Select a menu item for more details:
Note:Values marked by an asterisk are the factory default settings.
Job Buffering
Purpose:
To specify whether the printer temporarily stores jobs on the hard disk before printing.
Va l u e s :
Note:Changing the Job Buffering menu item automatically resets the printer.
Job Buffering
MAC Binary PS...

253
MAC Binary PS
Purpose:
To configure the printer to process Macintosh binary PostScript print jobs.
Va l u e s :
Network Buffer
Purpose:
To configure the size of the network input buffer.
Va l u e s :
Note:Changing the Network Buffer menu item automatically resets the printer.
See also:
Resource Save
Network  Setup
Purpose:
To configure an internal print server.
Va l u e s :
Values for this menu item are supplied by the specific print server. Select the menu item to see the
available values....

254
NPA Mode
Purpose:
To specify whether the printer performs the special processing required for bidirectional
communication, following the conventions defined in the Network Printing Alliance (NPA) Protocol.
Va l u e s :
Note:Changing this menu item automatically resets the printer.
PCL SmartSwitch
Purpose:
To configure the printer so it automatically switches to PCL emulation when a print job received
through the network port requires it, regardless of the default printer language.
Va l u e s :
See...

255
PS SmartSwitch
Purpose:
To configure the printer so it automatically switches to PostScript emulation when a print job received
through the network port requires it, regardless of the default printer language.
Va l u e s :
See also:
PCL SmartSwitch;Printer Language
Std Net Setup
Purpose:
To configure an internal print server.
Va l u e s :
Values for this menu item are supplied by the specific print server. Select the menu item to see the
available values.
On*Printer examines data on the network...

256
73
Infrared Menu
Use the Infrared Menu to change printer settings affecting jobs sent to the printer through an infrared
port.
Select a menu item for more details:
Note:Values marked by an asterisk are the factory default settings.
Infrared Buffer
Purpose:
To configure the size of the infrared input buffer.
Va l u e s :
Note:Changing the Infrared Buffer menu item automatically resets the printer.
See also:
Resource Save
Infrared BufferPCL SmartSwitch
Infrared PortPS SmartSwitch
Job...

257
Infrared Port
Purpose:
To activate the infrared por t.
Va l u e s :
Job Buffering
Purpose:
To specify whether the printer temporarily stores jobs on the hard disk before printing.
Va l u e s :
Note:Changing the Job Buffering menu item automatically resets the printer.
Max Baud Rate
Purpose:
To specify the rate at which data can be received through the infrared port.
Va l u e s :
The maximum baud possible for both the printer and the infrared adapter is automatically set during a
power on reset....

258
NPA Mode
Purpose:
To specify whether the printer performs the special processing required for bidirectional
communication, following the conventions defined in the Network Printing Alliance (NPA) Protocol.
Va l u e s :
Note:Changing this menu item automatically resets the printer.
PCL SmartSwitch
Purpose:
To configure the printer so it automatically switches to PCL emulation when a print job received
through the infrared port requires it, regardless of the default printer language.
Va l u e s :
See...