Lexmark T652dn User Manual

							35 Insufficient memory to support Resource Save feature
Try one or more of the following:
Press the arrow buttons until Continue appears, and then press  to disable Resource Save and continue
printing.
To enable Resource Save after receiving this message, make sure the link buffers are set to Auto, and then exit the
menus to activate the link buffer changes. When Ready appears, enable Resource Save.
Install additional memory.
37 Insufficient memory for Flash Memory Defragment operation
Try one or more of the following:
Press the arrow buttons until Continue appears, and then press  to stop the defragment process and
continue printing.
Delete fonts, macros, and other data in printer memory.
Install additional printer memory.
37 Insufficient memory to collate job
Try one or more of the following:
Press the arrow buttons until Continue appears, and then press  to print the portion of the job already
stored and begin collating the rest of the print job.
Cancel the current print job.
37 Insufficient memory, some held jobs were deleted
The printer deleted some held jobs in order to process current jobs.
Press the arrow buttons until 
Continue appears, and then press  to clear the message.
37 Insufficient memory, some Held Jobs will not be restored
The printer was unable to restore some or all of the confidential or held jobs on the printer hard disk.
Press the arrow buttons until 
Continue appears, and then press  to clear the message.
38 Memory full
Try one or more of the following:
Press the arrow buttons until Continue appears, and then press  to clear the message.
Cancel the current print job.
Install additional printer memory. Understanding printer messages161
Downloaded From ManualsPrinter.com Manuals 
						

							39 Complex page, some data may not have printed
Try one or more of the following:
Press the arrow buttons until Continue appears, and then press  to clear the message and continue printing.
Cancel the current print job.
Install additional printer memory.
42.xy Cartridge region mismatch
Install a print cartridge that matches the region number of the printer. x indicates the value of the printer region. y
indicates the value of the cartridge region. x and y can have the following values:
1US
2 Europe, the Middle East, and Africa
3Asia
4Latin America
9Invalid region
50 PPDS font error
Try one or more of the following:
Press the arrow buttons until Continue appears, and then press  to clear the message and continue printing.
The printer cannot find a requested font. From the PPDS menu, select Best Fit, and then select On. The printer will
find a similar font and reformat the affected text.
Cancel the current print job.
51 Defective flash detected
Try one or more of the following:
Press the arrow buttons until Continue appears, and then press  to clear the message and continue printing.
Cancel the current print job.
52 Not enough free space in flash memory for resources
Try one or more of the following:
Press the arrow buttons until Continue appears, and then press  to stop the defragment operation and
continue printing.
Downloaded fonts and macros not previously stored in flash memory are deleted.
Delete fonts, macros, and other data stored in flash memory.
Upgrade to a larger capacity flash memory card. Understanding printer messages162
Downloaded From ManualsPrinter.com Manuals 
						

							53 Unformatted flash detected
Try one or more of the following:
Press the arrow buttons until Continue appears, and then press  to stop the defragment operation and
continue printing.
Format the flash memory. If the error message remains, the flash memory may be defective and require replacing.
54 Serial option  error
 is the number of the serial option.
Try one or more of the following:
Check that the serial cable is connected correctly and is the proper one for the serial port.
Check that the serial interface parameters (protocol, baud, parity, and data bits) are set correctly on the printer
and host computer.
Press the arrow buttons until Continue appears, and then press  to continue printing.
Turn the printer off and then back on to reset the printer.
54 Network  software error
Try one or more of the following:
Press the arrow buttons until Continue appears, and then press  to continue printing.
Turn the printer off and then back on to reset the printer.
Upgrade (flash) the network firmware in the printer or print server.
54 Standard network software error
Try one or more of the following:
Press the arrow buttons until Continue appears, and then press  to continue printing.
Turn the printer off and then back on to reset the printer.
Upgrade (flash) the network firmware in the printer or print server.
55 Unsupported option in slot 
 is a slot on the printer system board.
Try one or more of the following:
1Turn the printer power off.
2Unplug the power cord from the wall outlet.
3Remove the unsupported option card from the printer system board.
4Connect the power cord to a properly grounded outlet.
5Turn the printer power back on. Understanding printer messages163
Downloaded From ManualsPrinter.com Manuals 
						

							56 Parallel port  disabled
 is the number of the parallel port.
Try one or more of the following:
Press the arrow buttons until Continue appears, and then press  to clear the message.
The printer discards any data received through the parallel port.
Make sure the Parallel Buffer menu item is not set to Disabled.
56 Serial port  disabled
 is the number of the serial port.
Try one or more of the following:
Press the arrow buttons until Continue appears, and then press  to clear the message.
The printer discards any data received through the serial port.
Make sure the Serial Buffer menu item is not set to Disabled.
56 Standard parallel port disabled
Try one or more of the following:
Press the arrow buttons until Continue appears, and then press  to clear the message.
The printer discards any data received through the parallel port.
Make sure the Parallel Buffer menu item is not set to Disabled.
56 Standard USB port disabled
Try one or more of the following:
Press the arrow buttons until Continue appears, and then press  to clear the message.
The printer discards any data received through the USB port.
Make sure the USB Buffer menu item is not set to Disabled.
57 Configuration change, some held jobs were not restored
Since the time the jobs were stored on the printer hard disk something has changed in the printer to invalidate the
held jobs. Possible changes include:
The printer firmware has been updated.
Paper input, output, or duplex options needed for the print job were removed.
The print job was created using data from a device in the USB port and the device is no longer in the port.
The printer hard disk contains jobs that were stored while installed in a different printer model.
Press the arrow buttons until 
Continue appears, and then press  to clear the message. Understanding printer messages164
Downloaded From ManualsPrinter.com Manuals 
						

							58 Too many bins attached
1Turn the printer power off.
2Unplug the power cord from the wall outlet.
3Remove the additional bins.
4Connect the power cord to a properly grounded outlet.
5Turn the printer power back on.
58 Too many disks installed
1Turn the printer off.
2Unplug the power cord from the wall outlet.
3Remove the extra disks.
4Connect the power cord to a properly grounded outlet.
5Turn the printer back on.
58 Too many flash options installed
Too many optional flash memory cards or too many optional firmware cards are installed on the printer.
Try one or more of the following:
Press  to clear the message and continue printing.
Remove extra flash options:
1Turn the printer off.
2Unplug the power cord from the wall outlet.
3Remove extra flash options.
4Connect the power cord to a properly grounded outlet.
5Turn the printer back on.
58 Too many trays attached
1Turn the printer off.
2Unplug the power cord from the wall outlet.
3Remove the additional trays.
4Connect the power cord to a properly grounded outlet.
5Turn the printer back on.
59 Incompatible Duplex
Only options designed specifically for this printer are supported. Understanding printer messages165
Downloaded From ManualsPrinter.com Manuals 
						

							Try one or more of the following:
Remove the duplex unit.
Press  to clear the message and continue printing without using the duplex unit.
59 Incompatible envelope feeder
Only options designed specifically for this printer are supported.
Try one or more of the following:
Remove the envelope feeder.
Press  to clear the message and continue printing without using the envelope feeder.
59 Incompatible output bin 
Only options designed specifically for this printer are supported.
Try one or more of the following:
Remove the specified output bin.
Press  to clear the message and continue printing without using the specified output bin.
59 Incompatible tray 
Only options designed specifically for this printer are supported.
Try one or more of the following:
Remove the specified tray.
Press  to clear the message and continue printing without using the specified tray.
61 Remove defective hard disk
Try one or more of the following:
Press the arrow buttons until Continue appears, and then press  to clear the message and continue printing.
Install a different printer hard disk before performing any operations that require a hard disk.
62 Disk full
Try one or more of the following:
Press the arrow buttons until Continue appears, and then press  to clear the message and continue
processing.
Delete fonts, macros, and other data stored on the printer hard disk.
Install a larger printer hard disk. Understanding printer messages166
Downloaded From ManualsPrinter.com Manuals 
						

							80 Routine maintenance needed
The printer needs to have routine maintenance done. Order a maintenance kit, which contains all the items necessary
to replace the pick rollers, the charge roll, the transfer roller, and the fuser.
88 Cartridge low
The toner is low. Replace the print cartridge, and then press  to clear the message and continue printing.
88.yy Cartridge nearly low
The toner is low. Replace the print cartridge, and then press  to clear the message and continue printing.
88.yy Replace cartridge
The print cartridge is exhausted.
1Replace the print cartridge.
2Press  to clear the message.
200–282 Paper jam
1Clear the paper path.
2After clearing the paper path, press  to continue printing.
1565 Emulation error, load emulation option
The printer automatically clears the message in 30 seconds and then disables the download emulator on the firmware
card.
To fix this, download the correct download emulator version from the Lexmark Web site at www.lexmark.com. Understanding printer messages167
Downloaded From ManualsPrinter.com Manuals 
						

							Maintaining the printer
Periodically, certain tasks are required to maintain optimum print quality.
Cleaning the exterior of the printer
1Make sure that the printer is turned off and unplugged from the wall outlet.
CAUTION—SHOCK HAZARD: To avoid the risk of electric shock when cleaning the exterior of the printer,
unplug the power cord from the wall outlet and disconnect all cables to the printer before proceeding.
2Remove paper from the standard exit bin.
3Dampen a clean, lint‑free cloth with water.
Warning—Potential Damage: Do not use household cleaners or detergents, as they may damage the finish of
the printer.
4Wipe only the outside of the printer, making sure to include the standard exit bin.
Warning—Potential Damage: Using a damp cloth to clean the interior may cause damage to your printer.
5Make sure the paper support and standard exit bin are dry before beginning a new print job.
Storing supplies
Choose a cool, clean storage area for the printer supplies. Store supplies right side up in their original packing until you
are ready to use them.
Do not expose supplies to:
Direct sunlight
Temperatures above 35°C (95°F)
High humidity above 80%
Salty air
Corrosive gases
Heavy dust
Conserving supplies
There are some settings you can change from the printer control panel that will help you conserve toner and paper.
For more information, see “Supplies menu,” “Quality menu,” and “Finishing menu.”
If you need to print several copies, you can conserve supplies by printing the first copy and checking it for accuracy
before printing the remaining copies. Maintaining the printer168
Downloaded From ManualsPrinter.com Manuals 
						

							Checking the status of supplies
A message appears on the display when a replacement supply item is needed or when maintenance is required.
Checking the status of supplies from the printer control panel
1Make sure the printer is on and Ready appears.
2From the printer control panel, press the arrow buttons until  Status/Supplies appears, and then press
.
3Press the arrow buttons until  View supplies appears, and then press .
The status of each supply appears.
Checking the status of supplies from a network computer
Note: The computer must be connected to the same network as the printer.
1Type the printer IP address into the address field of your Web browser.
Note: If you do not know the IP address of the printer, print a network setup page and locate the IP address in
the TCP/IP section.
2Click Device Status. The Device Status page appears, displaying a summary of supply levels.
Ordering supplies
To order supplies in the U.S., contact Lexmark at 1-800-539-6275 for information about Lexmark authorized supplies
dealers in your area. In other countries or regions, visit the Lexmark Web Site at www.lexmark.com or contact the
place where you purchased the printer.
Note: All life estimates for printer supplies assume printing on letter‑ or A4‑size plain paper.
Ordering print cartridges
When 88 Cartridge low appears or when the print becomes faded:
1Remove the print cartridge.
2Firmly shake the cartridge side‑to‑side and front‑to‑back several times to redistribute toner.
3Reinsert the cartridge and continue printing.
Note: Repeat this procedure multiple times until the print remains faded, and then replace the cartridge. Maintaining the printer169
Downloaded From ManualsPrinter.com Manuals 
						

							Recommended print cartridges
Part nameLexmark Return Program CartridgeRegular cartridge
For the US and Canada
Print Cartridge T650A11A T650A21A
High Yield Print Cartridge T650H11A T650H21A
Extra High Yield Print Cartridge* T654X11A T654X21A
High Yield Print Cartridge for Label
ApplicationsT650H04A Not applicable
Extra High Yield Print Cartridge for Label
Applications*T654X04A Not applicable
For Europe, the Middle East, and Africa
Print Cartridge T650A11E T650A21E
High Yield Print Cartridge T650H11E T650H21E
Extra High Yield Print Cartridge* T654X11E T654X21E
High Yield Print Cartridge for Label
ApplicationsT650H04E Not applicable
Extra High Yield Print Cartridge for Label
Applications*T654X04E Not applicable
For the Asia Pacific Region
Print Cartridge T650A11P T650A21P
High Yield Print Cartridge T650H11P T650H21P
Extra High Yield Print Cartridge* T654X11P T654X21P
High Yield Print Cartridge for Label
ApplicationsT650H04P Not applicable
Extra High Yield Print Cartridge for Label
Applications*T654X04P Not applicable
For Latin America
Print Cartridge T650A11L T650A21L
High Yield Print Cartridge T650H11L T650H21L
Extra High Yield Print Cartridge* T654X11L T654X21L
High Yield Print Cartridge for Label
ApplicationsT650H04L Not applicable
Extra High Yield Print Cartridge for Label
Applications*T654X04L Not applicable
* Available for the T654 models.
Maintaining the printer170
Downloaded From ManualsPrinter.com Manuals