Lexmark Optra S 1250 Manual

245Clearing Jams
Clearing Jams
Caring for Your Printer
4Pull the paper from the back area of the output expander
straight out toward you. Pull the paper from the output
expander with more clearance space.
5Close both of the output expander rear doors. Make sure
all rear door latches are closed. 

Clearing Jams246
Clearing Jams
Caring for Your Printer 

Maintaining Your Printer
Chapter
Maintaining Your Printer247
Caring for Your Printer
Maintaining
Your Printer
10
Even though your printer is easy to maintain, you may want to
designate a key operator to do the setup and maintenance of your
printer. All users sharing the printer should refer printing
problems and maintenance tasks to this key operator.
From time to time, you’ll need to replace the print cartridge and
fuser cleaner, clean the printer, and replace the charge roll.
Replacement of routine...

Maintaining Your Printer248
Maintaining Your Printer
Caring for Your Printer
Ordering a Print Cartridge
We recommend you order a new print cartridge when the printer
first displays theToner Lowmessage. You will want to have it on
hand when the current one no longer prints satisfactorily.
There are three recommended print cartridges specifically
designed for your printer.
If you’re in the U.S. or Canada, call 1-800-438-2468 for information
about Lexmark Authorized Supplies Dealers in your area. In other...

249Maintaining Your Printer
Maintaining Your Printer
Caring for Your Printer
Storing the Print Cartridge
Store the print cartridge in the original packaging until you are
ready to install it.
Do not store the print cartridge in:
Temperatures greater than 43°C (110°F)
An environment with extreme changes in humidity or
temperature
Direct sunlight
Dusty places
Acarforalongtime
An environment where corrosive gases are present
An environment with salty air
Replacing the Print Cartridge
Complete the...

Maintaining Your Printer250
Maintaining Your Printer
Caring for Your Printer
Ordering a Charge Roll Kit
We recommend you order a new charge roll kit when toner fog or
background shading appears on printed pages. Order Lexmark
part number 1382990. Installation instructions are included in the
kit.
If you’re in the U.S. or Canada, call 1-800-438-2468 for information
about Lexmark Authorized Supplies Dealers in your area. In other
countries, contact the place where you bought your printer. 

Installing
Options 

Adding Options to the Printer
Chapter
Adding Options to the Printer253
Installing Options
Adding
Options to the
Printer
11
There are several options available for your printer. Since some of
them are installed below and others are installed above the printer,
you should consider the order to add them.
Start with features and options that are installed below the printer.
Place the first one to be installed on a sturdy, low table or on the
optional printer cabinet. Then, install the printer or next option...

Adding Options to the Printer254
Adding Options to the Printer
Installing Options
.
W
ARNING:When you install or remove the printer, the
standard dual 500-sheet drawer for the
Optra S 2455, and options, view each piece as
a separate part. Always install or remove a
part by itself. For example, do not pick up the
printer with the duplex option attached and
try to move both at once.
For Information About...Attaches to the Printer
See
Page...
INA Option System Board 309
Tri-Port Interface Option System...