Lexmark Impact S305 User Manual

7Press the Color/Black button to set a color or black-and-white print.
When you select color or black-only printing, the light near your choice comes on.
8Press .
Note: For best results, allow the prints to dry at least 24 hours before stacking, displaying, or storing.
Printing photos from a memory device using the printer software
1Load photo paper with the glossy or printable side faceup. (If you are not sure which side is the printable side, then
see the instructions that came with the paper.)
2From...

Printing photos from a PictBridge-enabled digital camera
PictBridge is a technology available in most digital cameras that lets you print directly from your digital camera without
using a computer.
1Insert one end of the USB cable into the camera.
Note: Use only the USB cable that came with the camera.
2Insert the other end of the cable into the PictBridge port on the front of the printer.
Notes:
Make sure that the PictBridge-enabled digital camera is set to the correct USB mode. If the camera USB...

Printing photos from a memory device using the proof sheet
1Load letter- or A4-size plain paper.
2From the printer control panel, press .
3Insert a memory card or flash drive.
If document files and image files are stored in the memory device, then press the arrow buttons to select
Photos, and then press 
.
4Press the arrow buttons to scroll to Proof Sheet, and then press .
5Press the arrow buttons to select an option to print a proof sheet.
You can print a proof sheet:
For all photos on the memory...

Printing photos from a digital camera using DPOF
If your camera supports Digital Print Order Format (DPOF), then you can specify which photos to print, how many of
each, and the print settings while the memory card is still in the camera. The printer recognizes these settings when
you insert the memory card into the printer or connect the camera to the printer.
Note: If you specify a photo size while the memory card is still in the camera, then make sure that the size of the paper
loaded in the printer...

To set up a connection between the printer and a Bluetooth-enabled device:
1Insert a USB Bluetooth adapter into the USB port located on the front of the printer.
BluetoothR
Bluetooth Dongle Connected appears on the display.
Note: A Bluetooth adapter is not included with the printer.
2From the printer control panel, press .
3Press the arrow buttons to scroll to Bluetooth Setup, and then press .
4Press the arrow buttons to scroll to Discovery, and then press .
5Make sure Discovery is set to On. If...

2From the printer control panel, press .
3Press the arrow buttons to scroll to Bluetooth Setup, and then press button .
4Press the arrow buttons to scroll to Security Level, and then press .
5Press the arrow buttons to select the security level, and then press .
Select Low to allow Bluetooth devices to connect and send print jobs to your printer without requiring users to
enter a pass key.
Select High to require users to enter a four-digit numeric pass key on the Bluetooth device before connecting
and...

Managing print jobs
Setting your printer as the default printer
Your printer should be selected automatically from the Print dialog when you send a print job. If you have to manually
select your printer, then it is not the default printer.
To set the default printer:
For Windows users
1Click , or click Start and then click Run.
2In the Start Search or Run box, type control printers.
3Press Enter, or click OK.
The printers folder opens.
4Right-click the printer, and then select Set as Default Printer.
For...

3From the print options pop-up menu, choose Print Settings or Quality & Media, depending on your operating
system.
4From the Print Quality pop-up menu, choose Draft or Quick Print as the printing mode.
5From the Presets pop-up menu, choose Save as, and then type a name for your setting configuration.
You must choose this configuration name from the Presets pop-up menu for each print job.
Changing the printing mode for a single print job
For Windows users
1
With a document open, click File > Print.
2Click...

For Macintosh users
1Click the printer icon on the Dock.
The print queue dialog appears.
2Pause the print job:
If you want to pause a particular print job, then choose the document name, and then click Hold.
If you want to pause all print jobs in the queue, then click Pause Printer or Stop Jobs, depending on your
operating system.
Resuming print jobs
For Windows users
1Click , or click Start and then click Run.
2In the Start Search or Run box, type control printers.
3Press Enter, or click OK.
The...

3Press Enter, or click OK.
The printer folder opens.
4Right-click the printer, and then select Open or See whats printing.
5Cancel the print job:
If you want to cancel a particular print job, then right-click the document name, and then select Cancel.
If you want to cancel all print jobs in the queue, then click Printer > Cancel All Documents.
For Macintosh users
1Click the printer icon on the Dock.
2From the print queue dialog, choose the job you want to cancel, and then click Delete.
Printing
50...