Lexmark E232 User Manual

							 
How to install options
41
How to access the system board
To install a memory or flash card you must access the printer system board.
CAUTION:Turn the printer off and unplug the power cord before continuing.
1Open the front cover by pressing the button on the left side of the printer and lowering the 
cover.
Downloaded From ManualsPrinter.com Manuals 
						

							 
How to install options
42 2
Open the rear exit.
3Open the side cover by pressing the two detents on the front right side of the machine and 
swinging the cover back.
Downloaded From ManualsPrinter.com Manuals 
						

							 
How to install options
43 4
Remove the two screws at the top and side of the metal plate covering the system board.
5Remove the metal plate by rotating it towards the front and to the right.
Downloaded From ManualsPrinter.com Manuals 
						

							 
How to install options
44
How to reattach the system board cover
When you are finished adding a memory or flash card, be sure to properly reattach the system 
board’s metal cover.
1Insert the two tabs on the right side of the metal plate into the holes toward the back of the 
system board and rotate the system board until it is flush against the printer.
2Screw in the two screws at the top and side of the metal plate.
3Close the side cover.
4Close the rear exit.
5Close the front cover.
Downloaded From ManualsPrinter.com Manuals 
						

							 
How to install options
45
How to add a memory card
The system board has one connector for an optional memory card. The printer can support up to 
64MB of additional memory (for a total of 80MB) for the Lexmark E232 and up to 128MB (for a total 
of 160MB) for the Lexmark E330 and Lexmark E332n. The Lexmark E230 does not support 
additional memory.
CAUTION:If you are installing a memory card after setting up the printer, turn the printer off 
and unplug the power cord before continuing.
Note:Memory options designed for other Lexmark printers may not work with your 
printer.
1Access the system board (see How to access the system board).
2Push open the latches on both ends of the memory 
connector.
3Unpack the memory card.
Warning:Memory and flash memory cards are easily 
damaged by static electricity. Touch 
something metal, such as the printer frame, 
before you touch a memory card.
Avoid touching the connection points along the edge of the card.
4Align the notches on the bottom of the card with 
the notches on the connector.
5Push the memory card firmly into the connector 
until the latches on either end of the connector 
snap into place.
It may require some force to fully seat the card.
6Make sure each latch fits over the notch on each 
end of the card.
7Reattach the system board cover (see How to reattach the system board cover).
8See How to get the printer driver to recognize installed options.
Downloaded From ManualsPrinter.com Manuals 
						

							 
How to install options
46
How to add a flash card
The system board has one connector for an optional flash card. The printer can support 16MB and 
32MB flash cards.
Note:The Lexmark E230 and Lexmark E232 do not support flash cards.
CAUTION:If you are installing a flash card after setting up the printer, turn the printer off and 
unplug the power cord before continuing.
Note:Flash cards designed for other Lexmark printers may not work with your printer.
1Access the system board (see How to access the system board).
2Unpack the flash card.
Warning:Flash cards are easily damaged by static electricity. Touch something metal, such 
as the printer frame, before you touch a card.
Avoid touching the metal pins on the bottom of the card.
3Holding the card by its sides, align the pins on the card with the holes on the system board.
Metal pins
Downloaded From ManualsPrinter.com Manuals 
						

							 
How to install options
47 4
Push the flash card firmly into place.
The entire length of the connector on the flash card must touch and be flush against the 
system board.
Be careful not to damage the connectors.
5Reattach the system board cover (see How to reattach the system board cover).
6See How to get the printer driver to recognize installed options.
Downloaded From ManualsPrinter.com Manuals 
						

							 
How to install options
48
How to install a 550-sheet drawer
Your printer supports one optional drawer that lets you load up to 550 sheets of paper.
Note:The Lexmark E230 does not support a 550-sheet drawer.
CAUTION:If you are installing a 550-sheet drawer after setting up the printer, turn the printer 
off and unplug the power cord before continuing.
1Unpack the 550-sheet drawer and remove any packing material.
2Place the drawer in the location you have chosen for your printer.
3Align the holes in the printer with the positioning posts on the 550-sheet drawer and lower the 
printer into place.
4See How to get the printer driver to recognize installed options.
Downloaded From ManualsPrinter.com Manuals 
						

							 
How to install options
49
How to get the printer driver to recognize installed options
After the printer is turned on, the printer driver should automatically recognize an option you 
installed. If it does not, you can add it manually.
Note:If you have not installed your printer driver yet, follow the appropriate instructions 
under Software and network tasks. After you have installed a printer driver, return 
here to complete these instructions.
1Click StartÆ SettingsÆ Printers.
2Select the printer’s icon.
3Click FileÆ Properties.
4Click the Install Options tab.
5Add the appropriate options to your configuration:
550-Sheet Tray or Flash Card—Select the option you installed from the Available options 
list and click Add.
Memory Card—Increase the printer memory to the appropriate number.
6Click OK.
Downloaded From ManualsPrinter.com Manuals 
						

							 
Contents
2
Contents
Notices ............................................................................................. 6
E
Tr
L
S
L
The Uni
C
E
Pr
S
Chapter 1: Printer overview ........................................................ 11
Chapter 2: Print media tasks and tips ........................................ 13
What
Where
Ti
Paper
Pr
T
Enve
Labe
C
Ti
St
S
T
How to l
Ext
Downloaded From ManualsPrinter.com Manuals
 
Notices
6
Notices
Edition notice
Edition: November 2003
The following paragraph does not apply to any country where 
such provisions are inconsistent with local law: L
IN
W
I
W
P
e
st
T
t
inf
edit
descr
Comm
I
Road,
and E
Ser
Buc
inf
incurrof
t
count
Ref
not
all
progr
produc
equiv
e
and v
progr
manuf
© 2003 Lexmark International, Inc.
All rights reserved.
UNITED STATES GOVERNMENT RIGHTS
T
under 
docum
Trademarks
Le
Le
ot
Pict
PC